Maury MW - Programmable Noise Generators - UFX7000B Series
- Output White Gaussian noise
- Output power up to +30 dBm
- 127 dB of attenuation; 0.1 dB step size
- Units > 2 GHz have total attenuation of 79.9 dB
- Low distortion signal path
- Power 115 VAC, 60 Hz
- Noise attenuator accuracy: ±0.2 dB or 0.5% at 1 – 500 MHz ±0.2 dB or 1% at 0.5 – 1.0 GHz ±0.3 dB or 2% at 1 – 2 GHz
- Standard connectors SMA female
- 7” touch screen display
- Dimensions: 17.25 in. wide x 6.50 in. including feet, high x 19.50 in. deep
- Removable hard drive for added security
- Operating Temperature: -10° to +65°C
The UFX7000B broadband AWGN noise generator has a powerful single board computer with flexible architecture used to create complex custom noise signals for advanced test systems. This versatile platform allows the user to meet their most challenging design requirements. Precision components provide high output power with superior flatness, and the flexible computer architecture allows control of multiple attenuators, switches, and filter banks.
The standard RF configuration includes a broadband noise source and noise path attenuator with a maximum attenuation range of 127 dB in 0.1 dB steps. Additional attenuation ranges, and step sizes are available. Optional filters can be specified in any combination of low pass, high pass, band pass, or band reject. Combined with advanced switching circuitry, the designer can create many different path combinations. The signal output connectors can be located on the front, or rear panel to provide convenient customer access on the bench, or in a rack system. An optional signal combiner, and signal attenuator allow independent control of the noise & signal paths to vary SNR while BER testing.
The unit has a 7-inch touch-screen display, mouse, and keyboard for manual control, or standard Ethernet for ATE remote control. Optional IEEE 488.2 GPIB and RS232 remote interfaces are also available. If there are additional requirements for your noise application, please contact the factory for more information about custom designs.
|
Output |
Output Power |
Attenuation |
|
White Gaussian noise |
Up to +30 dBm |
127 dB; 0.1 dB step size |
More Product Information
- SOSA Aligned
- 3U VPX Form-Factor
- Reduced SWaP applications
- Ruggedization Level 200
- 11 Radial Clock Outputs
- OpenVPX Backplane support for 1000BASE-KX or 10GBASE-KR
- Optional Chip Scale Atomic Clock (CSAC) Holdover
- Optional Low Phase Noise (LPN) Analog output
- Optional secure GPS (M-code)
- Optional Timecode I/O
- Flexible bench configuration empowers users to easily set up instruments and DUTs to match any measurement workflow.
- Automated, multi-instrument calibration workflows empower users to achieve high accuracy results across diverse setups with minimal user intervention.
- Built-in system calibration verification instills confidence in measurement accuracy before data collection begins.
- Comprehensive small-signal, large-signal, and pulsed testing captures real-world device behavior for reliable design and modeling.
- Powerful visualization and analytics suite empowers users to quickly interpret results, extract models, and drive faster design decisions.
-
APS-H optical format CMOS sensor
-
PoCXP
-
4-DIN type connector
-
79.7 fps at full resolution
-
Monochrome (X-2620B) and color (X-2620C) models
-
Extended feature set with Sequencer Control and Multiple Region of Interest selection to support advanced imaging applications
-
On-board Defect Pixel and 2D Fixed Pattern Noise Correction for improved image quality
-
Simplified firmware update in the field via interface cables using GenICam File Access
-
Robust, fan-less design for industrial imaging applications
-
Heat-dissipation optimized housing to reduce image noise
-
Build-in tripod adapter and multiple mounting holes for eased system integration
-
DIN 1.0/2.3 CoaXPress connectors for secure operation in industrial environments
-
Single cable solution using Trigger and Power over CoaXPress
-
Comprehensive I/O functionality for extended control of connected system components
-
Select between B 270 ASG protection glass and filter types: IRC30 IR cut filter or Schneider 486 IR cut filter
- Industry Leading Power Density – Up to 1700 Watts in 1U
- Standard Digital Interfaces – USB&RS232/485
- LXI Ethernet and Isolated analog interfaces
- Power Factor Correction-PFC and universal AC input
- “Green” Sleep Mode – Automatically “sleeps” after period of non-use
- Built in sequencing - Unload your system controller
- Programmable fold-back protection delay
- Single-slot low profile 32 bit PCI Express module
- IRIG A, B, NASA 36, 1 PPS sync inputs
- GPS sync option (maintains single-slot)
- HaveQuick sync input option
- Propagation delay correction
- Zero latency time reads
- Match Time output
- IRIG-B time code output (option)
- External Event time tags
- Three user programmable rates
- Supports Windows 8 & 10
- Digitally Signed WHQL Driver
- Designed for Low Profile PCI Express slots.
- 5” touch screen display
- Noise output through female N connector
- Ethernet connection for remote control
The NGX1000 programmable noise generator is a high performance, broadband additive white gaussian noise (AWGN) generator in an easy-to-use compact form factor. The streamlined user interface and flat menu structure provides a fast, simple way to add RF noise in a communications system to test reliability, robustness and performance.
All functionality of the generator is accessible through the 5” touch screen or via remote control through an ethernet connection delivering flexible, programmable noise generation for broad use in semiconductor, military, aerospace, satellite, medical and communications applications.
- Single-slot 32 bit PCI Express module
- IRIG A, B, NASA 36, 1 PPS sync inputs
- GPS sync option (maintains single-slot)
- HaveQuick sync input option
- Propagation delay correction
- Zero latency time reads
- Match Time output
- IRIG-B time code output (option)
- External Event time tags
- Three user programmable rates
- Supports Windows 8 & 10
- Digitally Signed WHQL Driver
- IRIG A & B/IEEE-1344, and NASA 36 inputs standard
- HaveQuick sync option
- Propagation delay compensation
- Zero latency time reads
- Match Time output (P4)
- IRIG B time code output option
- External Event time tag (P4)
- Three user programmable rates
- Ruggedization option
- Multi-pin Front Panel P4 I/O option
- Speed: Calibration is faster since there is no need to manually connect and disconnect standards.
- Accuracy: Eliminates errors caused by manual handling, such as connector inconsistencies and improper torquing.
- Ease of Use: Minimal user interaction is required, making calibration simpler and more accessible.
- Reliability: Reduces wear and tear on VNA ports and connectors, prolonging their lifespan.
- Consistency: Provides repeatable results across multiple calibration sessions and users.
Maury Microwave
Website
Maury Microwave is a pioneering leader in the design and manufacture of precision RF and Microwave calibration, test & measurement, and modeling solutions that are powering global efforts toward a more secure, more connected, future.
Maury Microwave offers Measurement and Modeling Device Characterization Systems and Services including nonlinear passive, active and hybrid-active fundamental and harmonic load pull, non-50Ω X-Parameter modeling, pulsed IV Pulsed s-parameters and compact transistor modeling, and patent-pending ultra-fast/accurate noise parameters.
