Maury MW - USB Power Sensors - RTP5000 Series
- 6 GHz, 8 GHz, 18 GHz and 40 GHz RF Power Sensors
- Up to 195 MHz video bandwidth with 3 ns rise time
- Real-Time Power ProcessingTM technology with zero measurement dead time
- 100,000 measurements per second
- Power Analyzer Suite advanced measurement and analysis software
- Crest factor, CCDF and statistical measurements
- 10 GS/s effective sample rate
- 100 MS/s continuous sample rate
- Synchronized multi-channel measurements
Providing the highest video bandwidth and fastest rise times, RTP5000 peak USB power sensors with Real-Time Power ProcessingTM deliver 100,000 measurements per second, no gaps in signal acquisition and zero measurement latency. Combining this performance with automatic pulse measurements, CCDF and crest factor statistical analysis, multi-channel capabilities and documentation tools RTP5000 peak power sensors are the ideal instrument for fast, accurate and reliable RF power measurements.
Real-Time Power ProcessingTM
Real-Time Power ProcessingTM (RTPP) technology is a unique parallel processing methodology that performs the multi-step process of RF power measurement at incredible, unmatched speeds. While conventional power meters and USB sensors perform steps serially, resulting in have long re-arm times and missed data Maury sensors with RTPPTM capture, display and measure every pulse, glitch and detail with no gaps in data and zero latency.
|
Frequency Range |
Measurement Range |
Video Bandwidth |
Rise Time |
Time Resolution/Trigger Jitter |
Min Pulse Width/Max PRF |
Measurement Speed |
|
50 MHz to 40 GHz |
-60 dBm to +20 dBm |
195 MHz |
< 3 ns |
100 ps |
10 ns / 50 MHz |
100,000 per second |
More Product Information
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
IEEE 1588 Precision Time Protocol allows for easy synchronization of multiple cameras and devices on network
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system cost
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter
- Two 120/240 V Outlets
- Circuitry rated for 20 A
- 8’ Flexible Power Cord
- Shrouded Safety Banana Jacks
- Stable footprint with non-slip feet
- Energy absorber with a rating of 400VDC at ±150A
- Provides up to 400V at 150A for 60kW of output power
- Energy Absorber Load chassis creates a total resistance of approximately 1.5 Ohms at 30kW continuous and 60kW peak
- Our classic LL163 Line Lights are suitable for low intensity, low speed line scan applications.
- These line lights are well established and have proven reliability.
- Provides a intensity level of 24kLux (working distance of 25mm).
- Available in 7 wavelengths including 395nm (UV) and 880nm (IR).
- Pre-engineered for expandability in 1.5” (38.1mm) increments up to 81” (2.06m).
- LL163 derivatives include LL2912 (3”), LL3024 (6”) and LL3148 (12”) (which represent legacy part numbers)
- Low Noise
- Excellent line/load regulation
- Remote sense
- Coarse and fine voltage controls
- Constant voltage or constant current operation with automatic crossover and mode indication
- Individual On/Off switch per output (not including fixed output)
- Variable ( 1.5V to 5V ) Auxiliary Output
- Shrouded socket-compatible with bare wire and shrouded safety plug connections up to 4 mm
-
On-Off power switch
-
30 A Circuit Breaker
-
Inlet - NEMA L6-30
-
Outlets – NEMA L6-30R
Test Tap:
-
3ft.
-
(2) fork terminals (current)
-
(1) fork terminals (ground)
-
(2) Shielded Banana (voltage)
- Calibration-grade metrology standards
- Used for VNA calibration and/or calibration validation
Coaxial air lines are air-dielectric transmission lines with highly accurate dimensions that can be used as fundamental impedance standards in measurement and calibration applications, and may also be used to establish reference positions for measurements.
Bead supported air lines offer greater convenience and easier connections (the center conductor is automatically aligned by the dielectric bead for easy connection); beadless air lines offer better impedance and electrical length accuracies, as well as lower VSWR (the center conductor floats free in the air line body, and the male connector nut is retractable to facilitate insertion of the center conductor contact before the thread- on connection tightened.
The AL-9504-2 Emergency Stop (E-Stop) Unit provides a central connection point for external emergency stop panic buttons and positioner controllers that are located throughout the system. In the event of an emergency stop, the AL-9504-2 will command the appropriate positioner controller to disconnect motor drive power on all axes.
Maury Microwave
Website
Maury Microwave is a pioneering leader in the design and manufacture of precision RF and Microwave calibration, test & measurement, and modeling solutions that are powering global efforts toward a more secure, more connected, future.
Maury Microwave offers Measurement and Modeling Device Characterization Systems and Services including nonlinear passive, active and hybrid-active fundamental and harmonic load pull, non-50Ω X-Parameter modeling, pulsed IV Pulsed s-parameters and compact transistor modeling, and patent-pending ultra-fast/accurate noise parameters.
