Maury MW - VNA Verification Kit - Automated Calibration Kit Series
- Speed: Calibration is faster since there is no need to manually connect and disconnect standards.
- Accuracy: Eliminates errors caused by manual handling, such as connector inconsistencies and improper torquing.
- Ease of Use: Minimal user interaction is required, making calibration simpler and more accessible.
- Reliability: Reduces wear and tear on VNA ports and connectors, prolonging their lifespan.
- Consistency: Provides repeatable results across multiple calibration sessions and users.
Universal VNA Calibration Modules (uCal) simplify and expedite the calibration process of a Vector Network Analyzer (VNA) by automating the use of calibration standards, reducing human error, and providing accurate results without manual intervention. A uCal contains a set of precisely defined and integrated calibration standards, each standard individually characterized with measurement uncertainty and stored on the uCal’s onboard memory. The uCal is equipped with electronic switches to select and connect the appropriate calibration standard to the VNA, thereby enabling rapid transitions between standards without physically disconnecting or reconnecting cables, reducing the chances of human-induced errors like improper torque or connector wear.
|
Frequency Range |
Connector Types |
Control Interface |
|
50 MHz - 18 GHz or 26.5 GHz |
3.5mm, 7mm, Type N |
USB (direct VNA support or via Maury Insight) |
More Product Information
- Vector Network Analyzer Frequency Range from 10 MHz up to 3.2 GHz
- Spectrum Analyzer Frequency Range from 9 kHz up to 3.2 GHz
- -156 dBm/Hz Displayed Average Noise Level (Typ.)
- -98 dBc/Hz @10 kHz Offset Phase Noise (1 GHz, Typ.)
- Total Amplitude Accuracy < 1.2 dB
- 1 Hz Minimum Resolution Bandwidth (RBW)
- All-Digital IF Technology
- Standard Preamplifier
- Distance to fault capability using VNA time domain analysis
- Up to 1.5 GHz Tracking Generator Kit
- Built-in Advanced Measurement capability (CHP, ACPR, OBW, CNR, TOI, etc)
- 10.1 lnch WVGA (1024 x 600) Display
- Output White Gaussian noise
- 127 dB of attenuation; 0.1 dB step size
- Units > 2 GHz have total attenuation of 79.9 dB
- Low distortion signal path
- Noise attenuator accuracy:
- ±0.2 dB or 0.5% at 1 – 500 MHz
- ±0.2 dB or 1% at 0.5 – 1.0 GHz
- ±0.3 dB or 2% at 1 – 2 GHz
- Standard connectors SMA female
- Power 115 VAC, 60 Hz; 110 VAC, 220 VAC
- Operating Temperature: -10° to +65°C
- Speed: Calibration is faster since there is no need to manually connect and disconnect standards.
- Accuracy: Eliminates errors caused by manual handling, such as connector inconsistencies and improper torquing.
- Ease of Use: Minimal user interaction is required, making calibration simpler and more accessible.
- Reliability: Reduces wear and tear on VNA ports and connectors, prolonging their lifespan.
- Consistency: Provides repeatable results across multiple calibration sessions and users.
- Flexible bench configuration empowers users to easily set up instruments and DUTs to match any measurement workflow.
- Automated, multi-instrument calibration workflows empower users to achieve high accuracy results across diverse setups with minimal user intervention.
- Built-in system calibration verification instills confidence in measurement accuracy before data collection begins.
- Comprehensive small-signal, large-signal, and pulsed testing captures real-world device behavior for reliable design and modeling.
- Powerful visualization and analytics suite empowers users to quickly interpret results, extract models, and drive faster design decisions.
- Specified performance to 43.5 GHz with Extended K™ ports
- Simple signal integrity testing of passive multiport and differential devices
- Advanced time domain option provides tools for signal integrity analysis
- Wide dynamic range enables measurement of very low reflection artifacts
- Excellent corrected directivity minimizes measurement uncertainty
- SmartCal™ auto calibration unit reduces calibration and setup time
- Time domain with time gating option enables TDR-like measurements
- Modern LAN interface for remote control is faster than GPIB
- A common GUI and SCPI interface within the ShockLine family
- The compact 3U high chassis allows for the efficient use of rack space
- Bias tee option simplifies test setups where the DUT needs DC biasing
- Universal Fixture Extraction (UFX) software option provides advanced de-embedding tools for test fixture extraction
- S-parameters comparison of user-characterized and factory-characterized verification standards
- S-parameters comparison of user-characterized and factory-characterized verification standards with measurement uncertainty boundaries
- Includes beaded airline, mismatch airline, offset shorts and fixed loads
- Additive white Gaussian noise
- Integrated amplifier
- Manual attenuator
- NC6000A -BER testing, and SNR applications
- NC8000A – Secure signal jamming
- Military Applications
- Custom configurations available (consult factory)
The NC6000A and NC8000A Series instruments are designed for general-purpose noise applications on the bench, or in a rack test station. The manual controls make it simple to operate and reduce test set up time. Standard units can be modified for specific customer requirements. Please consult the factory for pricing and availability of these requests.
- 1-port VNA with frequency options from 150 kHz to 6 GHz
- External PC control enables control of multiple ShockLine MS46121B devices in parallel for excellent multisite throughput
- Very compact package allows for direct connection to the DUT
- Scalar transmission measurements in a (1-to-1) or (1-to-n) configuration
- No on-board data storage eliminates the need for data purging in secure applications
- Standard bandpass time domain with time gating enables easier and faster fault identification
- A common GUI interface within the ShockLine family reduces switching costs between models
- 2-port VNA with frequency options from 1 MHz to 8 GHz / 20 GHz / 43.5 GHz (options for 20, 50, and 100 meters)
- Extend remote ports 100 meters apart with PhaseLync synchronization
- Small and lightweight ports enable direct connection to DUT eliminating long cable runs
- Guaranteed performance to 43.5 GHz with Extended-K™ ports
- PC control takes advantage of external computer processing power and functionality
- No on-board data storage makes use in secure applications more convenient
- Common ShockLine control software delivers powerful debug and test capabilities
- PhaseLync control module MN25132A
Maury Microwave
Website
Maury Microwave is a pioneering leader in the design and manufacture of precision RF and Microwave calibration, test & measurement, and modeling solutions that are powering global efforts toward a more secure, more connected, future.
Maury Microwave offers Measurement and Modeling Device Characterization Systems and Services including nonlinear passive, active and hybrid-active fundamental and harmonic load pull, non-50Ω X-Parameter modeling, pulsed IV Pulsed s-parameters and compact transistor modeling, and patent-pending ultra-fast/accurate noise parameters.
