Meatest - M133C 1F Power & Energy Calibrator
-
Power quality and energy functions
-
0.01° phase shift accuracy
-
15 - 1000 Hz output
-
Built-in multimeter for transducer calibration
-
Floating current output for 3-wire power meters
-
Voltage from Current function
Single phase electric power/energy calibrator with power quality functions for calibration and testing of grid measuring appliance like power meters, power transducers or power quality analysers. Terminals 2 and 3 are inactive.
M133C is electric AC/DC power and energy calibrator for calibration of power meters, power transducers, power quality analysers and generally all kinds of power measuring devices. AC voltage, current, power and energy functions have calibrated phase shift in frequency range from 15 Hz to 1 kHz with resolution as good as 0.001 Hz. Built-in 5½ process multimeter for transducer calibration is standard part of every M133C calibrator.
Languages: English, Chinese (simplified)
Power quality functions
Four different distortion functions are available in M133C calibrator: Harmonic distortion with up to 63 harmonic products, interharmonic distortion up to 5000 Hz, amplitude modulation using symetrical sine or square wave envelope and finally dip/swell amplitude modulation using custom square wave envelope. Modulation frequency can be set in range from 0.001 Hz to 50 Hz, maximum modulation depth is 30 %.
Calibration versatility
M133C is more than just a sophisticated power source. Using built-in process multimeter, both transducer inputs and outputs can be handled by the M133C at the same time so you can calibrate it more easily, using no other calibration equipment. Floating current output can be connected directly with voltage output to allow for 3-wire power meter calibration. One calibrator, many applications - saving your time, space and costs.
| DC voltage |
1 - 280 V ± 150 ppm / year |
| AC voltage |
1 - 600 V, 15 - 1000 Hz ± 120 ppm / year |
| DC current |
5 mA - 30 A (1500 A with 140-50 Current Coil) ± 175 ppm / year |
| AC current |
5 mA - 30 A, 15 - 1000 Hz (1500 A with 140-50 Current Coil) ± 175 ppm / year |
| DC Power & Energy |
5 mW - 8.4 kW (420 kW with 140-50 Current Coil) ± 380 ppm / year |
| AC Power & Energy |
5 mW - 18 kW, 15 - 1000 Hz (900 kW with 140-50 Current Coil) 0.01° phase shift accuracy, power factor -1 to +1 Harmonic, interharmonic, modulation/flicker, dip/swell distrortion functions ± 370 ppm / year |
Process Multimeter
| DC voltage |
0 - 12 V ± 100 ppm / year |
| DC current |
0 - 25 mA ± 100 ppm / year |
| Frequency |
1 Hz - 15 kHz ± 50 ppm / year |
More Product Information
- Multiple voltage⁄current ranges
- Direct numeric entry and incremental rotary control of voltage and current
- The remote or local sense
- Illuminated keys and display legends.
- Up to ten store/recall set-ups (30 setups for triple output)
- Power output display
- Link and copy mode
- Two 120/240 V Outlets
- Circuitry rated for 20 A
- 8’ Flexible Power Cord
- Shrouded Safety Banana Jacks
- Stable footprint with non-slip feet
- 500 MHz - 4 GHz bandwidths
- Up to 40 GS/s sample rate
- 15.4” capacitive touch screen
- MAUI with OneTouch
- Powerful, Deep Toolbox
- Exceptional Serial Data Tools
- 16 digital channels with 1.25 GS/s
- Huge Applied Offset Range
- Optional Application Packages
High voltage differential probes provide high CMRR over a broad frequency range to simplify the measurement challenges found in noisy, high common-mode power electronics environments. The probe’s design is easy-to-use and enables safe, precise high voltage floating measurements.
- Large switching capacity in a small footprint
- Switch up to 16 A current - highest in its class
- High breakdown voltage (1,000 V rms between open contacts)
- Ideal for applications such as high current/high power switching, AC line power switching, driving relays for industrial machinery, solenoid switching, and automotive engine control
- Fail-safe interrupt inputs that can detect a fault condition automatically open up relays to their default state
FormFactor - Cascade Ultra High-Power (UHP) - Enabling single-contact high-current/high-voltage test
-
Enables coaxial measurements up to 10,000 V and 300 A pulsed (600 A in a parallel configuration) with a single touchdown
-
Even distribution of high current with innovative multi-fingertip design
-
Compatible with TESLA 200/300 mm power device characterization system
-
Reduced measurement time by testing both high-voltage and high-current conditions with a single touchdown
-
Accurate characterization of a wide range of pad sizes and test currents, with minimum pad damage and contact resistance
-
Safe, reliable and repeatable high-current/voltage measurements over a wide temperature range (from -55°C to +300°C)
- Small
- Complete, closed-loop system with embedded controls in less than 28 x 13.2 x 7.5 mm
- Precise
- 0.5 µm resolution
- 6 mm of travel
- Simple system integration
- High-level motion commands over standard serial interface (I2C or SPI)
- Flexible system, fast to market
- Rapidly configurable for push or pull motion
- Low voltage / low power use
- 3.3 V input, <500 mW power use
- Holds position when power is off
- 1U 19” rack mount
- Dual Redundant hot swappable Power Supplies
- Dual GPS Disciplined Modules
- Guaranteed performance to 43.5 GHz with Extended K™ ports
- High output power allows measurement of high attenuation devices
- Advanced time domain option provides tools for signal integrity analysis
- Wide dynamic range enables measurement of very low reflection artifacts
- Excellent corrected directivity minimizes measurement uncertainty
- SmartCal™ auto calibration unit reduces calibration and setup time
- Time domain with time gating option grants easier and faster fault identification
- Modern LAN interface for remote control is faster than GPIB
- A common GUI and SCPI interface within the ShockLine family
- Bias tee option simplifies test setups where the DUT needs DC biasing
- Universal Fixture Extraction (UFX) software option provides advanced de-embedding tools for test fixture extraction
- E-Band VNA
- Extended frequency range covering E-band and major parts of V band
- Fully assembled test system eliminates setup errors and increases reliability
- Tethered modules connect directly to the DUT increasing measurement stability
Meatest
We develop and manufacture electrical calibration instruments for calibration laboratories and testing facilities in electronics, engineering, utility, aeronautics and telecommunications sectors. Designed for automated calibrations our instruments bring effective solutions to customers like NPL, Samsung, Siemens and Volkswagen.
Contact Details
Meatest, spol. s r.o. Headquarters
Železná 509/3, Czech Republic - 619 00 BRNO
GPS: 49°10'13.93"N,16°36'53.2"E
Phone: 420-543-250-886
Fax: 420-543-250-890
Email: meatest@meatest.cz
Test & Measurement
Download Line Card
