Meatest - M641 Real-Resistance RTD Simulator
-
Real resistors switched by relays
-
Custom temperature scales
-
No residual resistance
-
5 W load capacity
-
Six different languages
Resistance decade box designed for RTD and other resistance-based sensors' simulation. 0.1°C accuracy and 5W load capacity.
M641 is programmable real-resistance decade with parameters designed specifically for RTD sensors' simulation and testing of RTD evaluation units like temperature regulators, transducers, etc. The core function is still resistance so you can as well calibrate ohmmeters and other resistance based meters easily. M641 is made of high load resistors and relays allowing for 5 W load capacity and 0.01°C resolution at the same time. Floating output terminals of M6xx decades allow for AC measurements as well, see datasheet for typical frequency responses.
Languages: English, German, Spanish, French, Russian, Czech
User comfort
M6xx series was made to make resistance calibration as easy as it gets. Large LCD shows all related parameters including total accuracy. And there is no residual resistance or hidden absolute error so you don't have to calculate it by yourself, accuracy you see is what you get. And that's not the only thing that firmware sorts out for you. Would you like the resistance shown in temperature units? Distance? Force? RTD and user function will do this for you. Complete recalibration? Ten minutes and off you go.
Connectivity
All decades' functions can be remotely controlled via RS232, USB, LAN or GPIB interface. This way you can introduce calibration/test stage directly into production line of any resistance based sensor and reduce time required for final quality tests dramatically.
| Resistance |
10 Ω - 300 kΩ max dissipation power 5 W ± 200 ppm / year |
| Temperature | RTD ± 0.1°C / year, resolution 0.01°C |
More Product Information
- A real-time diagnostic tool supports EMC/EMI debugging.
- Fast visualize EMC/EMI problems.
- Enables easy comparison of countermeasures before and after.
- Capable of measurement from entire products to single components.
- Factor-editor function provides correction of antenna characteristics, cable loss and preamplifier.
- User friendly compact design.
- Customer supplied spectrum and probes acceptable (Please consult)
-
10 kΩ - 100.0 GΩ, short function
-
Hot-switching up to 6 kVdc limit
-
Test voltage and current indication
The CORTEX Best Source Selector (BSS) is the ultimate choice for real-time telemetry source selection. It’s the go-to tool for pinpointing the best Telemetry source among multiple antennas tracking the same airframe across various channels.
The Best Source Selector streamlines the selection process by automatically choosing the top Telemetry stream, even from up to 16 sources or more, using a combination of signal quality metrics and other criteria. With its extensive capabilities in aligning paths and compensating for delays, the CORTEX Best Source Selector ensures optimal source selection, no matter where the antennas are located or what kind of range infrastructure you’re working with.
The MDR system is your key to data collection in challenging, real-world airborne flight test scenarios. Its modular design allows it to seamlessly adapt to the full spectrum of test requirements, whether it’s a lightweight task or an extensive mission with diverse signals, environmental challenges, and lengthy recording periods.
A comprehensive range of signal interface modules, custom-tailored for various data sources and bus types, ensures that it’s ready to meet today’s demands and future requirements.
-
Real resistors switched by relays
-
Custom units and time sequences
-
No residual resistance
-
20 ppm accuracy
-
Six different languages
-
Automatic calibration of instruments
-
In line with ISO17025 and other metrology standards
-
Automated optical readout module for multimeters
-
Unlimited custom instruments and procedures
eZ Processing is the solution for telemetry data processing, analysis and display (real time or playback). It allows the capture of the data either from a PCM signal or directly through data sent on Ethernet (IRIG 106 Chapter 10) by the receiver.
It performs the frame synchronization, Engineering Unit conversion, data display and storage, as well as data subset dissemination to dedicated analysis tools. It can accommodate multiple display stations, each having selectable parameters and displays. When used in a system with Safran Defense & Space, Inc. (formerly Safran Data Systems, Inc.) data acquisition units like the XMA or MDR, the software parameter database is automatically updated by eZ configuration software, reducing the set-up time and preventing all errors.
35 ppm AC/DC multifunction calibrator for multimeters, power meters and generally all kinds of electric meters. Implementing modular design, 9010 can be further customized to calibrate oscilloscopes, insulation testers, sources and transducers.
- 35 ppm accuracy
- 400 MHz scope option
- Power quality functions, voltage from current
-
Maximum load 3 kW and 250 Vrms
-
Real resistance function
-
Temperature coefficient < 10 ppm/°C
Meatest
We develop and manufacture electrical calibration instruments for calibration laboratories and testing facilities in electronics, engineering, utility, aeronautics and telecommunications sectors. Designed for automated calibrations our instruments bring effective solutions to customers like NPL, Samsung, Siemens and Volkswagen.
Contact Details
Meatest, spol. s r.o. Headquarters
Železná 509/3, Czech Republic - 619 00 BRNO
GPS: 49°10'13.93"N,16°36'53.2"E
Phone: 420-543-250-886
Fax: 420-543-250-890
Email: meatest@meatest.cz
Test & Measurement
Download Line Card
