• Available in 30MHz, 40MHz, 60MHz, 80MHz, 120MHz, 200MHz, 350MHz and 500MHz models.
• All models feature 2 channels.
• Max Sampling rate of 150 Msa/s (30MHz & 60 MHz) 1.2 Gsa/s (40MHz, 80MHz, 120MHz) and 2.4 Gsa/s (200MHz, 350MHz and 500MHz) models.
• Up to 16-bit vertical resolution (14-bit on 30MHz & 60MHz models).
• All models have 4.3" Touchscreens.
• Excellent analog and digital modulation types available (AM, DSB-AM, FM, PM, PSK, FSK, ASK and PWM).

• A highly precise skew matching cable assembly with skew of 1psec or less between 2 cables, designed for digital transmission evaluation.
• Continuous operating temperature range: -30 to +85°C.
• Exhibits low cable insertion loss and is suitable for high-precision differential signal transmission evaluation and measurement applications.
• 4 types of cables with different maximum usage frequencies (26.5GHz, 40GHz, 50GHz, and 67GHz) are available.

• Reduced dark noise levels and improved dark offset 
• Improved sensitivity, including NIR response 
• In-camera image pre-processing (lens shading correction, pixel correction) 
• Large full well when using in-sensor binning >142Ke 
• Thousands of frames per second in Partial Scan Mode (ROI) 
• Multi-ROI support (up to 32 ROI) and Cycling Mode 
• Advanced Sequencer functions of different features

• Long cable lengths at maximum image acquisition rates 
• Data forwarding rate for distributed image processing 
• Fully supported by Sapera Vision Software SDKs

The ZS Series probes provide high impedance and an extensive set of probe tips and ground accessories to handle a wide range of probing scenarios. The high 1 MΩ input resistance and low 0.9 pF input capacitance means this probe is ideal for all frequencies. The ZS Series probes provide full system bandwidth with all Teledyne LeCroy oscilloscopes with bandwidths of 4 GHz and lower.

• HD4096 technology provides 12-bit resolution up to 8 GHz and 20 GS/s
• Up to 5 Gpts of acquisition memory enables detailed viewing of long events
• 15.6" 1900 x 1080 Full HD capacitive touchscreen
• New ProBus2 input supports up to 8 GHz bandwidth and direct compatibility with a wide variety of existing ProBus probes - 50Ω and 1MΩ coupling modes support all input types on a single connector
• MAUI with OneTouch user interface for intuitive and efficient operation
• Deep toolbox enables and simplifies complex analysis
• Intuitive navigation to quickly find important features in long waveforms
• Zone Trigger – Simple Triggering for Complex Signals

With the ProBus interface, the ZD500, 1000, and 1500 becomes an integral part of the oscilloscope. All probe gain and offset controls are transparent to the user, making it easier to probe the circuit without concern for which gain setting to choose. When used with a LeCroy digital oscilloscope, no external power supply is required.

• All Digital IF technology
• 10.1” WVGA (1024 x 600) Display
• Frequency range from 9 KHz up to 3.2 GHz
• -161 dBm/Hz Displayed Average Noise Level (Typ)
• -98 dBc/Hz @ 10 khz Offset Phase Noise (Typ)
• Total Amplitude Accuracy < 0.7 dB
• 1 Hz Minimum Resolution Bandwidth (RBW)
• Comes with Preamplifier

• 8 frequency counter channels, 16 isolated digital I/O channels, 2 isolated DAC channels in a single card 
• Single frequency measurement range that works from 0.05 Hz to 1 MHz 
• Very stable TCXO base clock, 50 MHz ±1 ppm 
• 195 kΩ Input impedance with selectable coupling (AC/DC) 
• Wide differential input voltage range (±48 V) with up to 250 V working common mode voltage 
• Programmable threshold and hysteresis levels with 1 mV resolution 
• Support for quadrature encoder 
• Isolated DIO channels with up to 60 V compliance 
• Isolated and independent 16-bit DAC channels, configurable for voltage or current output