With its small and high ruggedized design, XMA is the best fit for remote data acquisitions in harsh and small space areas. 

It is the perfect candidate for network telemetry applications and remote acquisitions, to reduce the wire intrusiveness, and acquire the data closer to the sensors. 

XMA also allows data recording, data processing, GPS localization and data transmission. XMA has the smallest size/channel types ratio, and proposes optimized module set for a large number of data type acquisitions, with state-of-the-art accuracy. 

A complete set of status and health information of the unit is remotely available for live monitoring and accurate data qualifiers.

• Small 
  • Complete, closed-loop system with embedded controls in less than 28 x 13.2 x 7.5 mm 
• Precise 
  • 0.5 µm resolution 
  • 6 mm of travel 
• Simple system integration 
  • High-level motion commands over standard serial interface (I2C or SPI) 
• Flexible system, fast to market 
  • Rapidly configurable for push or pull motion 
• Low voltage / low power use 
  • 3.3 V input, <500 mW power use 
  • Holds position when power is off

• Near Linear Power Supply 
• Modular 
• ≥0.95 PFC 
• Digital control loop technology 
• High Power Density (3.5 watts/cubic inch) 
• “Virtual Assets” by: 
  • Series operation 
  • Parallel operation 
  • Combined operation with loads 
• Simple integration

• 600 mW optical output power
• Eye-safe according to laser class 2M
• 70° fan angle
• Connection via 5-pin plug (12-24VDC) or 110-230VAC power supply unit
• Manually focusable
• IP67 RATED
• Integrated TTL Modulation*

The ZQ1-MagicLine is the brightest eye-safe line laser in its class worldwide, setting new standards in industrial laser technology. With its unique combination of laser class 2M safety and 600 mW optical output, it ensures a bright and precise line even in the most challenging lighting conditions. Unlike conventional lasers, it remains clearly visible in bright environments, making it ideal for positioning tasks with widely varying light levels. Its green 520 nm wavelength is especially well perceived by the human eye, while the 70° fan angle creates long, uniform lines. Manual focusing further enhances flexibility, making the ZQ1-MagicLine the perfect solution whenever precision, visibility, and safety must align.

• Easy replacement of essential components by the customer in the field with a downtime of less than 1 hour
• Intuitive API for easy integration with customer software and existing systems
• Standardized power and network components avoid additional costs
• Optimized for working areas up to 10 m x 10 m and projection distances up to 15 m
• Adjustable focus enables precise projections at different distances and on different surfaces
• Accuracy of better than +/- 0.25 mm/m for highly precise results
• Fine 3D line quality even at high projection distances ensures visible and clear projections

The VectorStar ME7838 Series broadband VNA offers the widest available single frequency sweep from 70 kHz to 110, (ME7838AX to 125), (ME7838EX to 125), to 145 GHz, and to 220 GHz with mmWave bands to 1.1 THz. 

• The ME7838AX or ME7838EX version can easily be upgraded to 145 GHz and to 220 GHz
• All versions may be configured to include banded millimeter-wave modules up to 1.1 THz
• Industry-best calibration and measurement stability: 0.1 dB vs 0.6 dB over 24 hrs.
• All versions support the 3744x-Rx receiver for noise figure measurements, including the ability to characterize differential noise figure, to 125 GHz
• Compact, lightweight mmWave modules (0.6 lb vs 7+ lbs and 1/50 the volume) offer low cost installation on smaller probe stations.

• Battery or rechargeable battery operation with polarity protection
• On/off switch
• Exactly calibrated red line
• 5mW output power
• Strong magnetic mount (100 N)
• Protection class IP40

The Z5A Belt-Aligner is a laser-based tool for the exact alignment of belt drives and pulleys. A compact line laser from the ZAT series is mounted in a specially designed holder and projects a red line that runs precisely parallel to the magnetic reference surface. Using the included target markers, drive and idler pulleys can be aligned quickly, safely, and without risk while at a standstill. Proven thousands of times in industrial use, the Z5A stands out for its ease of handling and reliable results. Delivered as a complete set with holder, measuring blocks, battery, and transport case, it offers everything needed for efficient belt alignment.

Reed Relay Modules integrate multiple high-performance reed relays into compact, ready-to-use packages for efficient signal switching in space-constrained designs. Available in 8-channel configurations, these modules simplify circuit design by combining switching functionality with integrated driver electronics and advanced packaging.

The RM05-8A-SP Series features an 8-pole relay configuration housed in a dual-in-line through-hole package, equipped with MAX4823 integrated drivers and kickback protection—eliminating the need for external activation circuitry and reducing PCB footprint.

• 96 digital lines configurable as either input or output
• Five available power supply rails for custom designs
• Mix and match with standard SMIP switching and digital I/O modules to create high density configurations
• VXIplug&play driver simplifies software development
• On-board connector header for simplifed migration to PCB implementation 
• Access to 16 MHz clock for use in complex designs
• Multiple front panel connector options