Products

Displaying 1 - 36 of 36

Teledyne LeCroy - AP033 500 MHz Active Differential Probe

Fully Integrated: With the ProBus™ interface, the AP033 becomes an integral part of the oscilloscope. The probe sensitivity and offset can be controlled from the oscilloscope front panel, the probe front panel, or by using remote control commands (GPIB or RS-232). Sensitivity, offset, input capacitance, and common mode voltage range are displayed on the oscilloscope screen. When used with a LeCroy digital oscilloscope, no external power supply is required.

Teledyne LeCroy - Current Probes

  • ProBus active probe interface with automatic scaling in A/div
  • Autozero and degauss capabilities built into instrument's user interface
  • CP030
    • 30 Arms continuous current
    • 50 Apeak​ current 
    • 50 MHz bandwidth
  • CP030A
    • 30 Arms continuous current
    • 50 Apeak current
    • 50 MHz bandwidth
    • 1 mA/div sensitivity
  • CP031
    • 30 Arms continuous current
    • 50 Apeak current
    • 100 MHz bandwidth
  • CP031A
    • 30 Arms continuous current
    • 50 Apeak current
    • 100 MHz bandwidth
    • 1 mA/div sensitivity
  • CP150
    • 150 Arms continuous current
    • 500 Apeak current
    • 10 MHz bandwidth
  • CP500
    • 500 Arms continuous current
    • 700 Apeak current
    • 2 MHz bandwidth

Teledyne LeCroy - DA1855A High-performance 100 MHz Differential Amplifier

  • Full control from oscilloscope through ProBus interface
  • Dc to 100 MHz bandwidth
  • Outstanding 100,000: 1 Common Mode Rejection Ratio (CMRR)
  • Gain of x1 or x10
  • Industry-leading overdrive recovery
  • Low noise
  • Selectable BW limiting
  • Two gain control modes when connected to a Teledyne LeCroy oscilloscope
  • Built-in precision Voltage Generator (PVG)
  • Comparator and true differential offset modes

Teledyne LeCroy - Differential Probes (<= 1.5 GHz)

Differential active probes are like two probes in one. Instead of measuring a test point in relation to a ground point (like single-ended active probes), differential probes measure the difference in voltage of a test point in relation to another test point

Teledyne LeCroy - High Voltage Differential Probes

High voltage differential probes provide high CMRR over a broad frequency range to simplify the measurement challenges found in noisy, high common-mode power electronics environments. The probe’s design is easy-to-use and enables safe, precise high voltage floating measurements.

Teledyne LeCroy - High Voltage Passive Probes

High voltage probes are suitable for a wide range of applications where high-voltage measurements must be made safely and accurately. There are several fixed-attenuation probes covering a range from 1 kV to 6 kV and varying transient overvoltage ratings. All of these high voltage probes feature a spring loaded probe tip and a variety of standard accessories to make probing high voltages safe and easy. Additionally, all of the high voltage probe have a probe sense pin to automatically configure the oscilloscope for use with the probe.

Teledyne LeCroy - HVD3102 1kV, 25 MHz High Voltage Differential Probe

  • 1 kV CAT safety rated
  • Exceptional common-mode rejection ratio (CMRR) across a broad frequency range
  • 1% gain accuracy
  • High offset capability at both high and low attenuation
  • AC or DC coupling
  • ProBus active probe interface with automatic scaling
  • Auto-zero capabilities
  • Wide oscilloscope compatibility

Teledyne LeCroy - HVD3102-NOACC 1kV, 25 MHz High Voltage Differential Probe without tip Accessories

  • 1 kV CAT safety rated
  • Exceptional common-mode rejection ratio (CMRR) across a broad frequency range
  • 1% gain accuracy
  • High offset capability at both high and low attenuation
  • AC or DC coupling
  • ProBus active probe interface with automatic scaling
  • Auto-zero capabilities
  • Wide oscilloscope compatibility

Teledyne LeCroy - HVD3106 1kV, 120 MHz High Voltage Differential Probe

  • 1 kV CAT safety rated
  • Exceptional common-mode rejection ratio (CMRR) across a broad frequency range
  • 1% gain accuracy
  • High offset capability at both high and low attenuation
  • AC or DC coupling
  • ProBus active probe interface with automatic scaling
  • Auto-zero capabilities
  • Wide oscilloscope compatibility

Teledyne LeCroy - HVD3106-6M 1kV, 80 MHz High Voltage Differential Probe with 6m cable

  • 1 kV CAT safety rated
  • Exceptional common-mode rejection ratio (CMRR) across a broad frequency range
  • 1% gain accuracy
  • High offset capability at both high and low attenuation
  • AC or DC coupling
  • 6 meter cable
  • ProBus active probe interface with automatic scaling
  • Auto-zero capabilities
  • Wide oscilloscope compatibility

Teledyne LeCroy - HVD3106-NOACC 1kV, 120 MHz High Voltage Differential Probe without tip Accessories

  • 1 kV CAT safety rated
  • Exceptional common-mode rejection ratio (CMRR) across a broad frequency range
  • 1% gain accuracy
  • High offset capability at both high and low attenuation
  • AC or DC coupling
  • ProBus active probe interface with automatic scaling
  • Auto-zero capabilities
  • Wide oscilloscope compatibility

Teledyne LeCroy - HVD3206 2kV, 120 MHz High Voltage Differential Probe

  • 2 kV CAT safety rated
  • Only 1500 Vdc safety rated probe per IEC/EN 61010-031:2015
  • Exceptional common-mode rejection ratio (CMRR) across a broad frequency range
  • 1% gain accuracy
  • High offset capability at both high and low attenuation
  • AC or DC coupling
  • ProBus active probe interface with automatic scaling
  • Auto-zero capabilities
  • Wide oscilloscope compatibility

Teledyne LeCroy - HVD3206-6M 2kV, 80 MHz High Voltage Differential Probe with 6m cable

  • 2 kV CAT safety rated
  • Only 1500 Vdc safety rated probe per IEC/EN 61010-031:2015
  • Exceptional common-mode rejection ratio (CMRR) across a broad frequency range
  • 1% gain accuracy
  • High offset capability at both high and low attenuation
  • AC or DC coupling
  • 6 meter cable
  • ProBus active probe interface with automatic scaling
  • Auto-zero capabilities
  • Wide oscilloscope compatibility

Teledyne LeCroy - HVD3605 6kV, 100 MHz High Voltage Differential Probe

  • 6 kV CAT safety rated
  • Widest differential voltage range available
  • Exceptional common-mode rejection ratio (CMRR) across a broad frequency range
  • 1% gain accuracy
  • High offset capability at both high and low attenuation
  • AC or DC coupling
  • 6 meter cable
  • ProBus active probe interface with automatic scaling
  • Auto-zero capabilities
  • Wide oscilloscope compatibility

Teledyne LeCroy - HVFO High Voltage Fiber Optically-isolated Probe

  • Applications
  • Upper-side gate drive signal measurements
  • Floating control signal or sensor voltage measurements
  • EMC, EFT, ESD, and RF immunity testing and system optimization
  • Any small signal measurements with high common-mode voltage
  • 60 MHz bandwidth
  • 35 kV common-mode voltage rating (fiber optic isolation)
  • Superior Noise and Rejection
    • 140 dB CMRR
    • Low loop inductance
    • Low attenuation
  • Reduced DUT loading, better pulse response compared to conventional HV differential probes
  • Selectable tips from ±1V to ±40V
  • Eliminates need to “float” the oscilloscope
  • ProBus-compatible with many Teledyne LeCroy oscilloscopes

Teledyne LeCroy - HVP120 400 MHz High Voltage Passive Probe

  • 400 MHz probe bandwidth
  • 900 ps rise time
  • 1000 Vrms maximum input
  • Up to 6 kV transient overvoltage

Teledyne LeCroy - Optical Probes

Teledyne LeCroy's wide-band multi-mode optical-to-electrical converters are designed for measuring optical communications signals. Their broad wavelength range and multi-mode input optics make these devices ideal for applications including Ethernet, Fibre Channel, and ITU telecom standards. Available to support optical data rates up to 11.3 Gb/s with reference receivers, or slightly higher without reference receivers.

Teledyne LeCroy - Passive Probes

  • Compact probe head
  • Supports fine pitch SMD probing
  • Rugged, Sharp tip
  • HF optimized connection accessories
  • Over 30 accessories
  • Low input capacitance

Teledyne LeCroy - PPE1.2KV 10:1/100:1 200/300 MHz 5M Ohm/50M Ohm Probes

The PPE series of probes are suitable for a wide range of applications where high-voltage measurements must be made safely and accurately. There are five fixed-attenuation probes covering a range from 2 kV to 20 kV, and one switchable probe providing ÷10/÷100 attenuation for voltage inputs up to 1.2 kV.

New technology which utilizes hybrid circuitry (and switch reading for probes with switchable gain/attenuation) minimizes ringing and overshoot to provide a precise response.

All fixed-attenuation, standard probes automatically re-scale any LeCroy 9300C or LC series oscilloscope for the appropriate attenuation factor of the probe.

Teledyne LeCroy - PPE2KV 100:1 400 MHz 50M Ohm High Voltage Probe

The PPE series of probes are suitable for a wide range of applications where high-voltage measurements must be made safely and accurately. There are five fixed-attenuation probes covering a range from 2 kV to 20 kV, and one switchable probe providing ÷10/÷100 attenuation for voltage inputs up to 1.2 kV.

New technology which utilizes hybrid circuitry (and switch reading for probes with switchable gain/attenuation) minimizes ringing and overshoot to provide a precise response.

Teledyne LeCroy - PPE4KV 100:1 400 MHz 50M Ohm High-Voltage Probe

The PPE series of probes are suitable for a wide range of applications where high-voltage measurements must be made safely and accurately. There are five fixed-attenuation probes covering a range from 2 kV to 20 kV, and one switchable probe providing ÷10/÷100 attenuation for voltage inputs up to 1.2 kV.

New technology which utilizes hybrid circuitry (and switch reading for probes with switchable gain/attenuation) minimizes ringing and overshoot to provide a precise response.

All fixed-attenuation, standard probes automatically re-scale any Teledyne LeCroy 9300C or LC series oscilloscope for the appropriate attenuation factor of the probe.

Teledyne LeCroy - PPE5KV 100:1 400 MHz 50M Ohm High-Voltage Probe

The PPE series of probes are suitable for a wide range of applications where high-voltage measurements must be made safely and accurately. There are five fixed-attenuation probes covering a range from 2 kV to 20 kV, and one switchable probe providing ÷10/÷100 attenuation for voltage inputs up to 1.2 kV.

New technology which utilizes hybrid circuitry (and switch reading for probes with switchable gain/attenuation) minimizes ringing and overshoot to provide a precise response.

All fixed-attenuation, standard probes automatically re-scale any Teledyne LeCroy 9300C or LC series oscilloscope for the appropriate attenuation factor of the probe.

Teledyne LeCroy - PPE6KV 1000:1 400 MHz 50M Ohm High-Voltage Probe

The PPE series of probes are suitable for a wide range of applications where high-voltage measurements must be made safely and accurately. There are five fixed-attenuation probes covering a range from 2 kV to 20 kV, and one switchable probe providing ÷10/÷100 attenuation for voltage inputs up to 1.2 kV.

New technology which utilizes hybrid circuitry (and switch reading for probes with switchable gain/attenuation) minimizes ringing and overshoot to provide a precise response.

All fixed-attenuation, standard probes automatically re-scale any Teledyne LeCroy 9300C or LC series oscilloscope for the appropriate attenuation factor of the probe.

Teledyne LeCroy - Probe Adapters

  • Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope
  • Automatic probe detection
  • Provides all necessary power and offset control to the attached probe
  • Supports probes up to 4 GHz
  • Easy firmware updates
  • Wide variety of probes supported including:
    • Preamplifiers
    • Current Probes
    • Single-Ended Active Probes
    • Differential Active Probes

Teledyne LeCroy - RP4030 Active Voltage Rail Probe

  • 4 GHz Bandwidth
  • ±30V Offset Capability
  • ±800mV Dynamic Range
  • 50 kΩ DC Input Impedance
  • 1.2x Attenuation
  • (Low Additive Noise, ~5%)
  • MCX terminated cable with wide
    • variety of connections:
    • Solder-in (4 GHz)
    • Coaxial Cable to
    • U.FL receptacle (3 GHz)
    • MCX PCB Mount (4 GHz)
    • Browser (350 MHz)
  • ProBus Interface

Teledyne LeCroy - TPA10 ProBus Probe Adapter for TekProbe-BNC Probes

  • Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope
  • Automatic probe detection
  • Provides all necessary power and offset control to the attached probe
  • Supports probes up to 4 GHz
  • Easy firmware updates
  • Wide variety of probes supported including:
    • Preamplifiers
    • Current Probes
    • Single-ended Active Probes
    • Differential Active Probes

Teledyne LeCroy - TPA10-QUADPAK Set of 4 TPA10 ProBus Probe Adapters

  • Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope
  • Automatic probe detection
  • Provides all necessary power and offset control to the attached probe
  • Supports probes up to 4 GHz
  • Easy firmware updates
  • Wide variety of probes supported including: Preamplifiers, Current Probes, Single-Ended Active Probes and Differential Active Probes

Teledyne LeCroy - Transmission Line Probes

Transmission line probes are a special type of passive probe designed for use at very high frequencies. They replace the high impedance probe cable found in a traditional passive probe with a precision transmission line, with a characteristic impedance that matches the oscilloscope input (50 Ohm). This greatly reduces the input capacitance to a fraction of a picofarad, minimizing the loading of high frequency signals. A matching network at the tip increases the DC input resistance. While they have lower DC input resistance than a traditional passive probe (usually 500 Ohm) to 5 kOhm), the input impedance of these probes remains nearly constant over their entire frequency range. A traditional /10 passive probe will have a 10 MOhm) input impedance at DC, however this impedance drops rapidly with frequency, passing below the input impedance of a transmission line probe at less than 100 MHz.

Teledyne LeCroy - WaveLink® Differential Probe System (4 GHz – 6 GHz)

  • 4 GHz or 6 GHz models
  • Up to 5 Vpk-pk dynamic range with low noise
  • ±3 V offset range
  • Deluxe soft carrying case
  • Wide variety of tips and leads
    • Solder-In Lead
    • Positioner (Browser) Tip
    • Adjustable (Browser) Tip
    • Quick Connect Lead
    • HiTemp Solder-In Lead
  • Ideal for DDR2, DDR3, LPDDR2
  • Low loading and high imedance for minimal signal disturbance

Teledyne LeCroy - WaveLink® High Bandwidth Differential Probing System (13 GHz – 25 GHz)

  • Up to 25 GHz bandwidth (probe + oscilloscope)
  • System rise time as fast as 13 ps (20-80%)
  • Highest bandwidth Solder-In solution (25 GHz)
  • Ultra-compact browser tip (22 GHz)
  • Superior probe impedance minimizes AC loading on device under test (DUT)
  • Carbon-composite browser tips optimizes signal fidelity and loading
  • Probe noise as low as 14 nV/√Hz (1.6 mVrms)
  • Low probe attenuation
  • Large operating voltage range 
    • ±4 V common mode range 
    • ±2.5 V offset range
    • 2.0 Vpk-pk dynamic range
  • Long length Solder-In tip with field replaceable resistors

Teledyne LeCroy - WaveLink® Medium Bandwidth Differential Probing System (8 GHz – 13 GHz)

  • Choice of 8, 10, or 13 GHz bandwidth models
  • 3.5 ​Vpk-pk dynamic range
  • ±4 V offset range
  • Ideal for DDR3, DDR4, LPDDR3
  • Deluxe soft carrying case
  • Wide variety of tips and leads
    • Solder-In Lead
    • Positioner (Browser) Tip
    • SMA/SMP Lead
    • Square Pin Lead
  • SMA/SMP lead set accessory does not require purchase of a different amplifier
  • Low loading and high imedance for minimal signal disturbance

Teledyne LeCroy - ZD1000 1 GHz, 1.0 pF Active Differential probe

Innovative Probe Leads and Tips Provide Excellent Signal Performance Without Degradation

Probing with long leads or accessories is sometimes necessary to reach the test points, but it comes at the expense of reduced bandwidth, increased capacitance, and added noise. The ZD accessories are engineered to provide the best signal fidelity without ringing or distortions commonly introduced with tip accessories.

Teledyne LeCroy - ZD1500 1.5 GHz, 1.0 pF Active Differential probe

Fully Integrated

With the ProBus interface, the ZD500, 1000, and 1500 becomes an integral part of the oscilloscope. All probe gain and offset controls are transparent to the user, making it easier to probe the circuit without concern for which gain setting to choose. When used with a LeCroy digital oscilloscope, no external power supply is required.

Teledyne LeCroy - ZD200 200 MHz, 3.5 pF, 1 MOhm Active Differential probe

Fully Integrated

With the ProBus interface, the ZD200 becomes an integral part of the oscilloscope. The probe sensitivity and offset are automatically optimized based on the oscilloscope gain settings, so control is transparent to the user. When used with a LeCroy digital oscilloscope, no external power supply is required.

Teledyne LeCroy - ZD500 500 MHz, 1.0 pF Active Differential probe

Fully Integrated

With the ProBus interface, the ZD500, 1000, and 1500 becomes an integral part of the oscilloscope. All probe gain and offset controls are transparent to the user, making it easier to probe the circuit without concern for which gain setting to choose. When used with a LeCroy digital oscilloscope, no external power supply is required.

Teledyne LeCroy - ZS Series High Impedance Active Probes 1 GHz - 4 GHz Probes

  • High signal fidelity to 4 GHz bandwidth
  • Low circuit loading - High input impedance and low capacitance
  • 4 GHz, 2.5 GHz, 1.5 GHz and 1 GHz models
  • 1MΩ input resistance
  • 0.6 pF (4 GHz)and 0.9 pF input capacitance 
  • ± 8 V input dynamic range, ± 12 V offset range
  • Wide variety of tips and grounds
  • Easy to use, integrated with oscilloscope