Products

Displaying 1 - 25 of 32

NEW! Teledyne LeCroy WavePro HD 2.5 GHz - 8 GHz High Definition Oscilloscope

  • HD4096 technology provides 12-bit resolution up to 8 GHz and 20 GS/s
  • Up to 5 Gpts of acquisition memory enables detailed viewing of long events
  • 15.6" 1900 x 1080 Full HD capacitive touchscreen
  • New ProBus2 input supports up to 8 GHz bandwidth and direct compatibility with a wide variety of existing ProBus probes - 50Ω and 1MΩ coupling modes support all input types on a single connector
  • MAUI with OneTouch user interface for intuitive and efficient operation
  • Deep toolbox enables and simplifies complex analysis
  • Intuitive navigation to quickly find important features in long waveforms

NEW! Yokogawa DL350 Portable Scopecorder

The DL350 ScopeCorder is a portable instrument featuring the deep measurement and recording capabilities you need in the lab in a compact instrument you can take into the field. A ScopeCorder combines the transient signal capturing capabilities of an oscilloscope with the long-term datalogging capabilities of a data recorder. For “quick and easy” troubleshooting or sophisticated mixed-signal datalogging, the DL350 is a portable, powerful, and useable engineering tool that makes complete measurements completely portable.

Teledyne LeCroy DDA 7 Zi-A 1.5 GHz– 6 GHz Disk Drive Analyzers

  • Teledyne LeCroy’s unique summary view displays the Eye Pattern, TIE, Bathtub Curve and Jitter Histogram all on the screen at the same time
  • De-embed cables allow all of the SDA tools to be used as if the cables were not in the system
  • Create Eye Patterns utilizing the full memory for maximum statistical significance
  • Display Eye Patterns up to 100 times faster than other solutions
  • Trigger on 80-bit patterns at up to 3.125 Gb/s using the Serial Trigger
  • Decode 8b/10b data on up to 4 lanes simultaneously
  • Configure software PLL for any standard or custom requirement
  • Serial data compliance testing
    • 10/100/1000 BaseT ENET
    • USB 2.0
    • MIPI D-PHY
    • DDR2 / DDR3
    • PCI Express
    • DisplayPort
    • SAS
    • HDMI
    • UWB
    • SATA

Teledyne LeCroy HDO4000A 200 MHz - 1GHz Oscilloscope

  • 4 analog channels
  • 12-bit ADC resolution, up to
  • 15-bit with enhanced resolution
  • 200 MHz, 350 MHz, 500 MHz and
  • 1 GHz bandwidths
  • Long Memory – up to 50 Mpts
  • Multi-language User Interface
  • WaveScan - Search and Find
  • LabNotebook Documentation and
  • Report Generation
  • History Mode
  • Spectrum Analyzer Mode
  • Power Analysis Software
  • 16 Digital Channel MSO option
  • Serial Trigger and Decode options
  • 12.1” WXGA multi-touch screen display
  • Wide probe selection for power electronics, embedded electronics, and mechatronics applications

Teledyne LeCroy HDO6000A 350MHz-1GHz Oscilloscopes

  • 4 analog channels
  • 12-bit ADC resolution, up to 15-bit with enhanced resolution
  • 350 MHz, 500 MHz and 1 GHz bandwidths
  • Long Memory – up to 250 Mpts/Ch
  • 16 Digital Channel MSO option
  • Serial Data Toolsets
    • Trigger
    • Decode
    • Measure/Graph
    • Eye Diagram
  • 12.1” WXGA multi-touch screen display
  • Wide probe selection for power electronics, embedded electronics, and mechatronics applications
  • Advanced analysis and reporting toolsets
  • Advanced Triggering supplemented with TriggerScan and Measurement Trigger

Teledyne LeCroy HDO8000A 350MHz-1GHz 8-Channel 12-bit High Definition Oscilloscopes

  • 8 analog channels
  • 12-bit ADC resolution, up to 15-bit with enhanced resolution
  • 350 MHz, 500 MHz and 1 GHz bandwidths
  • Long Memory – up to 250 Mpts/Ch
  • 16 Digital Channel MSO option
  • Serial Data Toolsets
    • Trigger
    • Decode
    • Measure/Graph
    • Eye Diagram
  • Q-Scape™ Multi-tab display architecture
  • 12.1” WXGA multi-touch screen display with Ultra HD (UHD) 3840 x 2160 pixel extended-desktop mode
  • Wide probe selection for power electronics, embedded electronics, and mechatronics applications
  • Advanced analysis and reporting toolsets
  • Advanced Triggering supplemented with TriggerScan and Measurement Trigger

Teledyne LeCroy HDO9000 / HDO9000-MS 1 GHz - 4 GHz 10-bit High Definition Oscilloscopes

  • 10 bit resolution; up to 13.8 bits with Optimized Filtering
  • 1 GHz- 4 GHz bandwidths
  • Up to 40 GS/s sample rate
  • 15.4" capacitive touch screen
  • MAUI with OneTouch
    • Designed for touch
    • Built for simplicity
    • Made to solve
  • Advanced Tools
    • Jitter and Timing Analysis Capabilities
    • WaveScan – Search and Find
    • LabNotebook Documentation and Report Generation
    • History Mode – Waveform Playback
  • Optional Software Packages
    • Advanced Customization
    • Digital Filtering
    • Spectrum Analysis
    • Device and Switching Power Supply Analysis
    • Comprehensive set of serial data analysis, debug, validation and compliance tools
  • 16 digital channels with 1.25 GS/s
    • Analog and Digital Cross-Pattern Triggering
    • Digital Pattern Search and Find
    • Analog and Digital Timing Measurements
    • Logic Gate Emulation
    • Activity Indicators

Teledyne LeCroy HRO 12-bit 400MHz-600MHz Oscilloscopes

  • 12-bit ADC resolution up to 15-bit with ERES
  • 400 MHz and 600 MHz models
  • 256 Mpts/Ch
  • ±0.5% F.S. DC gain accuracy
  • 55 dB SNR
  • 1 mV vertical Sensitivity @ full bandwidth
  • Up to ±400 V offset capability 
  • 20 MHz, 100 MHz, 200 MHz, 350 MHz filters for additional noise filtering

Teledyne LeCroy LabMaster 10 Zi-A High Bandwidth Modular Oscilloscopes 20 GHz – 100 GHz

  • Up to 100 GHz Industry leading analog bandwidth
  • Acquisition module configurations with up to:
    • 4 channels at 36 GHz
    • 2 channels at 65 GHz
    • 1 channel at 100 GHz
  • Up to 240 GS/s sample rate
  • Long Memory - Up to 1.5 Gpt/ch
  • Modular Design - build a system with up to 20 acquisition modules, for:
    • 80 channels at 36 GHz
    • 40 channels at 65 GHz
    • 20 channels at 100 GHz
  • ChannelSync™ Architecture for 130 fs matching between channels
  • Multi-Lane eye, Jitter and Noise Analysis with SDAIII-CompleteLinQ
  • Optical Modulation Analysis with Optical-LinQ
  • PAM4 Eye, Jitter and Noise Measurements with PAM4 Signal Analysis
  • Industry’s only true hardware 14.1 Gb/s serial trigger
  • Add 12.5 GS/s mixed-signal capability at any time with the HDA125 high-speed digital analyzer

Teledyne LeCroy LabMaster 9 Zi-A Oscilloscopes 13GHz-45GHz

  • Up to 45 GHz
  • Up to 80 Channels @ 20 GHz
  • Up to 120 GS/s
  • Up to 768 Mpts/Ch

LabMaster 9 Zi-A modular oscilloscope systems completely re-define oscilloscope performance and capabilities.

  • Multi-channel operation at the highest bandwidths
    • 20 channels @ 45 GHz
    • 40 channels @ 36 GHz
    • 80 channels @ 20, 16, or 13 GHz
  • Bandwidth and channel upgrade flexibility
  • ChannelSync for precise synchronization of all acquisition modules
  • Server-class CPU (33.6 GHz effective clock rate, up to 192 GB RAM)
  • Ultra-low jitter noise floor (125 fs rms) and ultra-high time base stability.

Teledyne LeCroy MDA800A Motor Drive Analyzers

  • Complete Motor Drive System Debug and Validation in One Instrument
  • Three-Phase Power Measurements; Real, Apparent, Reactive Power
  • Efficiency Measurements
  • User-Configurable Numerics Table
  • Two- and Three-Wattmeter Methods Supported
  • Per-Cycle Time-Correlated Waveforms From Power Values
  • Harmonics Calculations and Filtering (optional)
  • Dynamic Drive Response Analysis, From Startup To Overload
  • Unique Zoom+Gate Mode
  • Line-Line To Line-Neutral Voltage Conversion
  • Up to 6000 VRMS Isolation with HVD Series Differential Probes
  • Easily Interface Other Current Measurement Devices
  • Complete Motor Interface (Torque, Speed, Position)
  • Graphical User Interface

Teledyne LeCroy SAM40 Sensor Acquisition Modules

  • 8, 16 or 24 input channels
  • 24-bit resolution
  • 40 kHz bandwidth (100 kS/s)
  • Plug-and-play with supported HDO
  • Complete physical units conversion and rescaling

Teledyne LeCroy SDA 7 Zi-A Serial Data Analyzers

  • Teledyne LeCroy's unique summary view displays the Eye Pattern, TIE, Bathtub Curve and Jitter Histogram all on the screen at the same time
  • De-embed cables allow all of the SDA tools to be used as if the cables were not in the system
  • Create Eye Patterns utilizing the full memory for maximum statistical significance
  • Display Eye Patterns up to 100 times faster than other solutions
  • Triggers on 80-bit patterns at up to 3.125 Gb/s using the Serial Trigger
  • Decode 8b/10/b data on up to 4 lanes simultaneously
  • Configure software PLL for any standard or custom requirement
  • Serial Data compliance testing
    • ​10/100/1000 BaseT ENET
    • USB 2.0
    • MIPI D-PHY
    • DDR2 / DDR3
    • PCI Express
    • DisplayPort
    • SAS
    • HDMI
    • UWB
    • SATA

Teledyne LeCroy SDAIII-CompleteLinQ Multi-Lane Serial Data, Noise and Crosstalk Analysis

  • Most complete jitter decomposition, eye diagram and analysis tools
  • Four simultaneous eye diagrams
  • Fastest eye diagram creation
  • 4-lane measurement and analysis capability
  • Unique Reference Lane and LaneScape Comparison Mode
  • Vertical noise measurements
  • Crosstalk analysis
  • Single CompleteLinQ dialog

Teledyne LeCroy VBA9000 Vehicle Bus Analyzer

  • 10 bit resolution; up to 13.8 bits with Optimized Filtering
  • 1 GHz bandwidths
  • Up to 40 GS/s sample rate
  • 15.4" capacitive touch screen
  • MAUI with OneTouch
    • Designed for touch
    • Built for simplicity
    • Made to solve
  • Advanced Tools
    • Jitter and Timing Analysis Capabilities
    • WaveScan – Search and Find
    • LabNotebook Documentation and Report Generation
    • History Mode – Waveform Playback
  • Optional Software Packages
    • Advanced Customization
    • Digital Filtering
    • Spectrum Analysis
    • Device and Switching Power Supply Analysis
    • Comprehensive set of serial data analysis, debug, validation and compliance tools
  • Analysis Packages Included
    • CAN FD TDME Symbolic
    • LIN TDME
    • Flexray TDMP

Teledyne LeCroy WaveExpert Sampling Oscilloscopes

  • Single-ended and differential measurements
  • Fast step (20 ps rise time)
  • Sub-millimeter measurement resolution
  • Advanced OSL (Open Short Load) calibration removes effects of cables, fixtures, etc.
  • TRUE differential TDR/TDT
  • Automated deskew
  • Accurate S-parameter measurements to 20 GHz
  • Data output in Voltage, Impedance, or S-parameter (SnP) format
  • Fully integrated TDR analysis with S-parameter analysis

Teledyne LeCroy WaveJet 300A Oscilloscopes

The WaveJet 300A provides the banner specifications, feature set and user interface to simplify how you work and shorten debug time. With a big, bright 7.5" display, long 500 kpts/Ch memory and up to 2 GS/s you will easily capture and see every detail of your waveform. The USB ports provide a quick way to save waveforms, store or print screen captures or connect to a PC. Math and measurement tools help you understand the waveforms and Replay mode allows you to look at a history of what has been captured. Altogether these specs, features and capabilities make the WaveJet 300A the right oscilloscope for your debugging needs.

Main Specifications

Bandwidth 100 MHz - 500 MHz
Starting from $4,000
Standard Memory 500 kpts
Max Memory 500 kpts/ch
Max Sampling Rate 2 GS/s
Input Channels 2, 4
Resolution 8-bit

Teledyne LeCroy WaveJet Touch 350MHz-500MHz Oscilloscopes

  • 350 MHz and 500 MHz bandwidths
  • Up to 2 GS/s sample rate
  • Long Memory - up to 5 Mpts
  • 7.5" touch screen display
  • 26 measurement parameters
  • Replay mode
  • Standard Pass/Fail Mask and Measurement testing
  • Standard I2​C, SPI and UART serial triggers
  • Standard USB Host, USB Device, GPIB, and LAN connectivity
  • Multi-language user-interface and help
  • Ultra-quick boot time

Teledyne LeCroy WaveMaster / SDA / DDA 8 Zi-B Oscilloscopes 4 GHz–30 GHz

  • Up to 30 GHz bandwidth and 80 GS/s sample rate
  • Most advanced oscilloscope user interface makes configuring complex measurements easy
  • The industry’s only true hardware 14.1 Gb/s serial pattern trigger
  • Add the Teledyne LeCroy HDA125 High-speed Digital Analyzer to create the most powerful, flexible mixed-signal test solution available
  • Low Jitter Measurement Floor and exceptional timebase stability
  • Comprehensive set of serial data analysis, debug, validation and compliance tools
  • Integrated 50 Ω and 1 MΩ inputs for true connection and probing flexibility
  • Integrated standard and custom measurements and math functions for unrivaled analysis capability
  • Multi-lane serial data eye, jitter and crosstalk analysis

Teledyne LeCroy WavePro 7 Zi-A 1.5GHz-6GHz Oscilloscopes

  • Teledyne LeCroy’s unique summary view displays the Eye Pattern, TIE, Bathtub Curve and Jitter Histogram all on the screen at the same time
  • De-embed cables allow all of the SDA tools to be used as if the cables were not in the system
  • Create Eye Patterns utilizing the full memory for maximum statistical significance
  • Display Eye Patterns up to 100 times faster than other solutions
  • Trigger on 80-bit patterns at up to 3.125 Gb/s using the Serial Trigger
  • Decode 8b/10b data on up to 4 lanes simultaneously
  • Configure software PLL for any standard or custom requirement
  • Serial data compliance testing
    • 10/100/1000 BaseT ENET
    • USB 2.0
    • MIPI D-PHY
    • DDR2 / DDR3
    • PCI Express
    • DisplayPort
    • SAS
    • HDMI
    • UWB
    • SATA

Teledyne LeCroy WaveRunner 6 Zi 400MHz-4GHz Oscilloscopes

  • 400 MHz - 4 GHz bandwidths
  • Up to 40 GS/s sample rate
  • 12.1" touch screen display
  • Advanced Tools
    • Spectrum Analyzer Mode
    • WaveScan - Search and Find
    • LabNotebook Documentation and Report Generation 
    • History Mode - Waveform Playback
  • Comprehensive set of serial data analysis, debug, validation and compliance tools
  • Advanced, Triggering with TriggerScan and Measurement Trigger
  • WaveRunner 620MZi complete debug bundle available
  • 18 digital channels with 2 GS/s
    • Analog and Digital Cross-Pattern Triggering
    • Digital Pattern Search and Find
    • Analog and Digital Timing Measurements
    • Logic Gate Emulation
    • Activity Indicators

Teledyne LeCroy WaveRunner 8000 - 500 MHz - 4 GHz Oscilloscope

  • 500 MHz- 4 GHz bandwidths
  • Up to 40 GS/s sample rate
  • MAUI with OneTouch
    • Designed for touch
    • Built for simplicity
    • Made to solve
  • Advanced Tools
    • Jitter and Timing Analysis Capabilities
    • WaveScan – Search and Find
    • LabNotebook Documentation and Report Generation
    • History Mode – Waveform Playback
  • Optional Software Packages
    • Advanced Customization
    • Digital Filtering
    • Spectrum Analysis
    • Device and Switching Power Supply Analysis
    • Comprehensive set of serial data analysis, debug, validation and compliance tools
  • 16 digital channels with 1.25 GS/s
    • Analog and Digital Cross-Pattern Triggering
    • Digital Pattern Search and Find
    • Analog and Digital Timing Measurements
    • Logic Gate Emulation
    • Activity Indicators

Teledyne LeCroy WaveRunner 8000-R - 1 GHz to 4 GHz Low-Profile Oscilloscope

  • Low-profile design - <2U (3.5”)
  • 1, 2.5, and 4 GHz bandwidths
  • Up to 40 GS/s sample rate
  • Deep Memory - up to 128 Mpts
  • Fully software-compatible with the WaveRunner 8000
  • Remote connectivity via LAN, USBTMC, and GPIB (optional)
  • Rackmount kit and removable SSD standard
  • Same powerful, deep toolbox of WaveRunner 8000 oscilloscopes
  • Support for ProBus active probes

Teledyne LeCroy WaveSurfer 10, 1 GHz, 10 GS/s Oscilloscope

  • 1 GHz, 10 GS/s, up to 16 Mpts/ch
  • MAUI - Advanced User Interface
    • ​Designed for Touch
    • Built for Simplicity
    • Made to Solve
  • WaveScan- Advanced Search and Find
  • LabNotebook Documentation and Report Generation
  • 10.4" Touch Screen Display
  • Spectrum Analyzer Mode
  • Power Analysis Software
  • Serial trigger and Decode
  • Advanced Debug Toolkit adds: 
    • 10 GS/s on all 4 channels
    • 16 Mpts/ch memory (32 Intlv'd)
    • Sequence Mode Segmented Memory
    • History Mode Waveform Playback
    • 13 Additional Math Operators
    • 2 Math Functions

Teledyne LeCroy WaveSurfer 3000 200MHz-750MHz Oscilloscopes

  • 200 MHz, 350 MHz, 500 MHz and 750 MHz bandwidths
  • Up to 4 GS/s sample rate
  • Long Memory - up to 10 Mpts/Ch
  • 10.1" touch screen display
  • MAUI - Advanced User Interface
  • Advanced Anomaly Detection
  • Capture, Debug, Analyze, Document
  • Multi-Instrument Capabilities
  • Future Proof

Pages