Products

Displaying 1 - 17 of 17

Acromag AcPC424 - Digital Input/Output Module Differential, TTL, Counter/Timer

  • 24 differential I/O, 16 TTL I/O
  • Four 16-bit counter/timer channels with six operating modes
The AcPC424 provides 24 differential input/outputs, 16 TTL input/output channels, and four 16-bit multifunction counter/timers.
The 16 TTL input/output channels can be programmed as inputs or as outputs on an individual channel basis. The 24 differential input/output channels are programmed as inputs or outputs on an 4-channel port basis. All input channels can be enabled for change of state, low, or high level transition interrupts.
This module saves money and CompactPCI slots by combining differential I/O, TTL I/O, and counter/timer functions on one card.

Acromag AcPC464 - Digital Input/Output and Counter/Timer

  • 64 digital input/output channels
  • 16-bit counter/timer channels with six operating modes
  • Change of state and level interrupts
The AcPC464 module provides 64 digital input/ output channels and four 16-bit multifunction counter/timers.
All 64 I/O channels, when set as inputs, support configuration for interrupts on either a change-of-state or on a high-to-low or low-to-high transition. A debounce timer is selectable to help filter out false transitions.
Four 16-bit multifunction counters/timers are configurable for pulse width modulated output, watchdog timer, event counter, frequency measurement, pulse width measurement, period measurement, or one shot pulse output. The four 16-bit counters can also be configured into two 32-bit counter/timers.
This module saves money and CompactPCI slots by combining digital I/O and counter/timer functions on a single card.

Acromag AcPC482 - Counter/Timer with Quadrature

  • Ten 16-bit counter/timers, TTL
  • Event counter
  • Frequency measurement
  • Quadrature position measurement
  • Pulse-width or periodic rate monitor
  • Watchdog timer with isolated relay output

Acromag AcPC483 - Counter/Timer with Quadrature

  • Four 16-bit counters - TTL, and four 32-bit counters - RS422
  • Event counter
  • Frequency measurement
  • Quadrature position measurement
  • Pulse-width or periodic rate monitor
  • Watchdog timer with isolated relay output
Several models with a variety of configurations provide up to ten counter/timer channels for counting events, generating waveform control signals, measuring pulse-widths, periodic rates, or quadrature position and monitoring operations.
Support for internal or external triggering simplifies the synchronization of operations to specific events. Counter functions can use internally generated clocks or an externally supplied clock.
  • Most configuration is handled by a single register which minimizes programming.
  • Pullups are socketed for easy adjustment.

Acromag AcPC484 - Counter/Timer with Quadrature

  • Six 32-bit counters - RS422
  • Event counter
  • Frequency measurement
  • Quadrature position measurement
  • Pulse-width or periodic rate monitor
  • Watchdog timer with isolated relay output

Acromag APC424 - PCI Digital I/O (differential & TTL) and Counter/Timers

  • 40 I/O channels: 24 differential and 16 TTL
  • Four 16-bit or two 32-bit counter/timers
The APC424 provides 24 differential input/outputs, 16 TTL input/output channels, and four 16-bit multifunction counter/timers.

Acromag APC464 - PCI Digital I/O (TTL) and Counter/Timers

  • 64 TTL digital input/output channels
  • Four 16-bit or two 32-bit counter/timer channels
  • Six operating modes
  • TTL-compatible thresholds
The APC464 provides 64 TTL digital input/output channels and four 16-bit multi-function counter/timers.

Acromag APC482 - PCI Counter/Timer with Quadrature

  • Ten 16-bit counter/timers, TTL
  • Event counter
  • Frequency measurement
  • Quadrature position measurement
  • Pulse-width or periodic rate monitor
  • Watchdog timer with isolated relay output

Acromag APC483 - PCI Counter/Timer with Quadrature Board

  • Four 16-bit TTL counters and four 32-bit RS422 counters
  • Event counter
  • Frequency measurement
  • Quadrature position measurement
  • Pulse-width or periodic rate monitor
  • Watchdog timer with isolated relay output

Acromag APC484 - PCI Counter/Timer with Quadrature Board

  • Six 32-bit counters - RS422
  • Event counter
  • Frequency measurement
  • Quadrature position measurement
  • Pulse-width or periodic rate monitor
  • Watchdog timer with isolated relay output

Acromag IP480 Counter/Timer Module (Not recommended for new designs)

  • Two or six 16-bit (one or three 32-bit) counter/timer channels
  • Event counter
  • Output waveform generator
  • Pulse-width or periodic rate monitor
  • Watchdog timer with isolated relay output
  • Interrupt support

Acromag IP482 / 483 / 484 Counter/Timer Module

  • Ten 16-bit-TTL (482)
  • Five 16-bit-TTL and two 16-bit-RS422 (483)
  • Five 16-bit-RS422 counter/timer channels (484)
  • 8 or 32MHz clock time base
Several models with a variety of configurations provide up to ten counter/timer channels for counting events, generating waveform control signals, measuring pulse-widths or periodic rates, and monitoring operations.
Support for internal or external triggering simplifies the synchronization of operations to specific events. Counter functions can use internally generated clocks or an externally supplied clock.

Acromag PMC424 Digital Input/Output Module, Differential, TTL, Counter/Timer

  • 24 differential I/O, 16 TTL I/O
  • Four 16-bit counter/timer channels, six operating modes
  • Change of state and level interrupts
The PMC424 digital I/O module provides 24 differential input/outputs, 16 TTL input/output channels, and four 16-bit multi-function counter/timers.

Acromag PMC464 Digital I/O Module, Counter/Timer

  • 64 TTL bi-directional I/O
  • Four 16-bit counter/timer channels with six operating modes
  • Change of state and level interrupts
The PMC464 module provides 64 digital input/ output channels and four 16-bit multifunction counter/timers.

Acromag PMC482 Counter/Timer Module

  • Ten 16-bit counter/timers, TTL
  • Event counter
  • Frequency measurement
  • Quadrature position measurement
  • Pulse-width or periodic rate monitor
Several models with a variety of configurations provide up to ten counter/timer channels for counting events, generating waveform control signals, measuring pulse-widths or periodic rates, and monitoring operations. Support for internal or external triggering simplifies the synchronization of operations to specific events. Counter functions can use internally generated clocks or an externally supplied clock.

Acromag PMC483 Counter/Timer Module

  • Four 16-bit counters - TTL, and four 32-bit counters - RS422
  • Event counter
  • Frequency measurement
  • Quadrature position measurement
  • Pulse-width or periodic rate monitor

Acromag PMC484 Counter/Timer Module

  • Six 32-bit counters - RS422
  • Event counter
  • Frequency measurement
  • Quadrature position measurement
  • Pulse-width or periodic rate monitor
Several models with a variety of configurations provide up to ten counter/timer channels for counting events, generating waveform control signals, measuring pulse-widths or periodic rates, and monitoring operations. Support for internal or external triggering simplifies the synchronization of operations to specific events. Counter functions can use internally generated clocks or an externally supplied clock.