Products

Displaying 1 - 11 of 11

Yokogawa 2553A Precision DC Calibrator

The 2553A Precision DC Calibrator, like our other Calibrators and Sources, offers users the simple operation and reliability they have come to trust from Yokogawa.
  • Digital Display of Output
  • High Basic Accuracy
  • High Stability and Low Noise
  • High Resolution
With output ranges of ±10 mV to ±30 V and ±1 mA to ±100 mA plus 10 different types of Thermocouples and Pt100 RTD, the 2553A can effectively solve the calibration requirements for DC Analog Meters and various temperature measuring instruments and controllers.

Yokogawa 2558A AC Voltage Current Standard

The 2558A AC Voltage Current Standard offers users the simple operation and reliability customers have come to trust from Yokogawa.
  • Sweep (Voltage/Current/Frequency)
  • Output Divider
  • Direct Readout of the Deviation
  • Digital Display of Output
  • Common Current Output Terminals
  • High Accuracy
  • High Stability
  • Wide Output Range
  • Wide Frequency Range
The wide output ranges of 1.00 mV to 1200.0 V AC and 1.00 mA to 60.00 A AC mean that the 2558A is the instrument of choice for the cost effective calibration of AC analog meters. Rotary controls and a range of computer interfaces enable the 2558A to be intuitively operated through the frontpanel or controlled by an ATE system.

Yokogawa 2560A High Voltage and High Current Precision DC Calibrator

The Model 2560A is a simple, precise and cost effective solution for calibrating DC measuring instruments such as analog meters, thermometers, temperature transmitters and data loggers
The 2560A Precision DC Calibrator offers high voltage and high current generation and intuitive operation for the analog meters calibration.
  • Wide output range of voltage and current generation
  • Dials and switches for each digit and function
  • High accuracy, stability, and resolution
  • Various effective functions for analog meters calibration.
With output ranges of 100 mV to 1000 V and 100 µA to 30A, plus 10 different types of Thermocouples and Pt100 RTD, the 2560A can effectively solve the calibration requirements for DC Analog Meters and various temperature measuring instruments and controllers.

Yokogawa CA150 Multifunction Calibrator (Handheld)

Signal source: DCV, DCA, OHM, RTD, TC (10 kinds), Frequency, Pulse
Measurement: DCV, DCA, OHM, RTD, TC (10 kinds), Frequency, Pulse
Features: Highly accurate within 0.02% of the DC voltage range for source and measure.
Source and measurement can be performed simultaneously. Vertical type with large-screen display.Loop power supply function (24 VDC at a load of up to 22 mA)
It is possible to measure current in the mA range while supplying power.Sink function. Sweep functions that allow 3 types of continuous outputs.
Options: 94010 AC adapter, 94015 NiMH Battery, 93027: Main Body case with strap

Yokogawa CA300 Series Process Calibrator

The CA300 Series is a high accuracy source and measure portable handheld calibrator used to inspect and maintain the accuracy of control devices such as temperature controllers, temperature transmitters, temperature sensors and other process devices which are used in process plants, industry machinery, and manufacturing. Available in 3 models, the CA310, CA320, and CA330 provide an ergonomic and friendly user-interface making it easy to use.

Yokogawa CA450 Process Multimeter

The Yokogawa CA450 Process Multimeter is a portable test instrument to combine a digital RMS multimeter and a loop calibrator to give process technicians the same functionality in one tool. The Yokogawa CA450 provides 24-Volt loop power, reducing the need for carrying a separate power supply when performing transmitter testing. And with its built-in, selectable 250-Ohm Hart resistor, it also eliminates the need for a separate resistor. Process technicians can now do the same job while carrying less equipment.

Yokogawa CA700 Low Pressure Calibrator

  • Accuracy 0.01% rdg for Pressure / 0.015% rdg for Current/Voltage (source/measurement)
  • Highest resolution class 0.001kPa (200.000 kPa range) 0.0001 psi (29 psi range)
  • “As Found”, “As Left”  and error rate (%)
  • IP54 dustproof and water proof case for harsh environments
  • 4-20mA step function for signal generation
  • 20mA Simulator to carry out loop test. 
  • Two-wire Transmitter Loop Check
  • 250-ohm resistor for HART and BRAIN communication

Yokogawa CA71 Multifunction Calibrator (Portable)

  • Signal source: DCV, DCA, Resistance, RTD, TC (10 kinds), Frequency, Pulse
  • Measurement: DCV, DCA, ACV, Resistance, RTD, TC (10 kinds), Frequency, Pulse
  • Features: Simultaneous signal source and measurement capacity, a wide array of useful functions, Easy operation, Online communication function
  • Options: AC adapter (94012: For 100V AC, 94013: For 120V AC, 94016: For 220-240V AC), B9108WA RJ sensor, B9108XA Accessory carrying case, 91017 Communications cable

Yokogawa LS3300 AC Power Calibrator

Built upon the technology of its predecessor, the 2558A, the LS3300 is an AC signal generator capable of outputting both current and voltage simultaneously, thus allowing it to calibrate power meters. Providing output ranges of  10mV-1250V, and 0.3 mA to 62.5 A, and upto 78.125 kW, the unit is capable of calibrating up to 0.15 % Class Power meters. New features on the LS3300 include a high definition LCD display, a vector diagram, and the ability to synchronize up to three units to emulate anything from single phase two wire to three phase four wire systems.

Yokogawa MC100 Pneumatic Pressure Standard

The MC100 Series is well-suited for calibration and maintenance of pressure instrumentation. Various pressure instruments such as pressure sensors, industrial transmitters, and pressure switches, as well as sphygmomanometers and other medical devices face severe price competition and demands for improved accuracy.

Yokogawa YHC5150X Fieldmate Handheld Communicator

  • Reads manufacturers’ DDs in their native format without the need for translations
  • HART®-compliant modem communicates with any registered or unregistered HART® Device
  • Features an ergonomic, handheld design
  • Enhanced 4.3” diagonal anti-glare touchscreen with color graphic display (no stylus required)
  • Full QWERTY keyboard for commissioning new transmitters
  • On Demand Help Menus and teachable device-specific short cuts
  • More than twice the battery capacity of any handheld communicator
  • Manage device information through PC connection
  • Integrated multi-language support