Products

Displaying 1 - 14 of 14

Yokogawa 322610 Leakage Current Tester (Analog)

Handy Universal tester for checking electrical appliance
Leakage Current Tester (AC/DC)

Yokogawa 51000 Series Digital Lux Meters

  • Wide measurement range, high accuracy
  • Spectral response characteristics for visible range
  • Good oblique incident light characteristics
  • USB communication and USB power supply
  • Recorder output

Yokogawa CA150 Multifunction Calibrator (Handheld)

Signal source: DCV, DCA, OHM, RTD, TC (10 kinds), Frequency, Pulse
Measurement: DCV, DCA, OHM, RTD, TC (10 kinds), Frequency, Pulse
Features: Highly accurate within 0.02% of the DC voltage range for source and measure.
Source and measurement can be performed simultaneously. Vertical type with large-screen display.Loop power supply function (24 VDC at a load of up to 22 mA)
It is possible to measure current in the mA range while supplying power.Sink function. Sweep functions that allow 3 types of continuous outputs.
Options: 94010 AC adapter, 94015 NiMH Battery, 93027: Main Body case with strap

Yokogawa CA300 Series Process Calibrator

The CA300 Series is a high accuracy source and measure portable handheld calibrator used to inspect and maintain the accuracy of control devices such as temperature controllers, temperature transmitters, temperature sensors and other process devices which are used in process plants, industry machinery, and manufacturing. Available in 3 models, the CA310, CA320, and CA330 provide an ergonomic and friendly user-interface making it easy to use.

Yokogawa CA450 Process Multimeter

The Yokogawa CA450 Process Multimeter is a portable test instrument to combine a digital RMS multimeter and a loop calibrator to give process technicians the same functionality in one tool. The Yokogawa CA450 provides 24-Volt loop power, reducing the need for carrying a separate power supply when performing transmitter testing. And with its built-in, selectable 250-Ohm Hart resistor, it also eliminates the need for a separate resistor. Process technicians can now do the same job while carrying less equipment.

Yokogawa CA700 Low Pressure Calibrator

  • Accuracy 0.01% rdg for Pressure / 0.015% rdg for Current/Voltage (source/measurement)
  • Highest resolution class 0.001kPa (200.000 kPa range) 0.0001 psi (29 psi range)
  • “As Found”, “As Left”  and error rate (%)
  • IP54 dustproof and water proof case for harsh environments
  • 4-20mA step function for signal generation
  • 20mA Simulator to carry out loop test. 
  • Two-wire Transmitter Loop Check
  • 250-ohm resistor for HART and BRAIN communication

Yokogawa CA71 Multifunction Calibrator (Portable)

  • Signal source: DCV, DCA, Resistance, RTD, TC (10 kinds), Frequency, Pulse
  • Measurement: DCV, DCA, ACV, Resistance, RTD, TC (10 kinds), Frequency, Pulse
  • Features: Simultaneous signal source and measurement capacity, a wide array of useful functions, Easy operation, Online communication function
  • Options: AC adapter (94012: For 100V AC, 94013: For 120V AC, 94016: For 220-240V AC), B9108WA RJ sensor, B9108XA Accessory carrying case, 91017 Communications cable

Yokogawa CW500 Power Quality Analyzer

The Yokogawa CW500 is a portable power meter that utilizes current clamp-on probes, navigation screens and quick start guides. These features enable user-friendly power consumption and power quality measurements in the field that conform to IEC61000-4-30 Class S.
  • Power Measurement and Logging
  • Power Quality Measurement
  • User Support
  • Analysis of Data and Report Generation

Yokogawa EY200 Earth Tester (Digital)

EY200 is an earth resistance tester for testing power distribution lines, in-house wiring system, electrical appliances etc. It also has an earth voltage range for earth voltage measurement.
  • Designed to safety standard IEC 61557
  • Reference to IEC 60529: Degrees of protection provided by enclosures (IP54). Measurement can be made even under adverse weather conditions
  • Large, easy-to-read LCD digital display
  • 2P Test leads (for simplified measurement) has a structure that both the safety alligator clip and the test probe are available
  • Warns when earth resistance of auxiliary earth spikes exceeds the permissible limit
  • Convenient carrying soft bag for accessories etc.
  • 3-Pole Earth Resistance Measurement (Precise Measurement)

Yokogawa TY520 Digital Multimeter

3.5-digit (6000-count dual display, 31-segment bar graph display), RMS type Measurement Functions: Voltage, Current, Resistance, Continuity Check, Diode Test, Frequency, Capacitance, Temperature
Features: Category IV 600V, Category III 1000V, USB Communication function, Closed Case Calibration (User calibration function).

Yokogawa TY530 Digital Multimeter

3.5-digit (6000-count dual display, 31-segment bar graph display), RMS type Measurement Functions: Voltage, Current, Resistance, Continuity Check, Diode Test, Frequency, Capacitance, Temperature, Logging-mode memory for 1600 data (TY530 only)
Features: Category IV 600V, Category III 1000V, USB Communication function, Closed Case Calibration (User calibration function).

Yokogawa TY710 Digital Multimeter

4.5-digit (50,000-count dual display, 51-segment bar graph display), RMS type Measurement Functions: Voltage, Current, Resistance, Continuity Check, Diode Test, Frequency, Capacitance, Temperature

Features: Category IV 600V, Category III 1000V, Large Internal Memory (1,000 data), USB Communication function, Closed Case Calibration (User calibration function).

Yokogawa TY720 Digital Multimeter

4.5-digit (50,000-count dual display, 51-segment bar graph display), RMS type Measurement Functions: Voltage, Current, Resistance, Continuity Check, Diode Test, Frequency, Capacitance, Temperature, Low Power Resistance
Features: Category IV 600V, Category III 1000V, Large Internal Memory (10,000 data), USB Communication function, Closed Case Calibration (User calibration function).

Yokogawa YHC5150X Fieldmate Handheld Communicator

  • Reads manufacturers’ DDs in their native format without the need for translations
  • HART®-compliant modem communicates with any registered or unregistered HART® Device
  • Features an ergonomic, handheld design
  • Enhanced 4.3” diagonal anti-glare touchscreen with color graphic display (no stylus required)
  • Full QWERTY keyboard for commissioning new transmitters
  • On Demand Help Menus and teachable device-specific short cuts
  • More than twice the battery capacity of any handheld communicator
  • Manage device information through PC connection
  • Integrated multi-language support