Products

Displaying 1 - 22 of 22

Aeroflex ADS-B INTEGRITY™ ADS-B Out Integrity Test Application

  • ADS-B equipment installation verification
  • Complete AC 20-165B fast and convenient reporting to identify installation issues
  • STC support
  • Eliminate post STC operational flights
  • Coupled testing in the hangar or on the flight line, eliminates:
    • Open sky requirements
    • GPS repeater
    • Weather issues
    • Interference with ATC operations
  • Saves time and money

Aeroflex ALT-8000 FMCW/Pulse Radio Altimeter Flightline Test Set

  • Tests FMCW radio altimeters including CDF types
  • Tests pulse radio altimeters (non-pulse compression types)
  • Direct-connect to UUT T/R or to installed system via antenna couplers
  • Full RF loop test allows TX, RX, Antenna or Feeder faults to be identified
  • Multi-channel operation (via additional test sets)
  • Programmable multi-leg climb/descend profiles
  • Large touch-screen display with simple user interface
  • Remote control interface USB/LAN
  • Lightweight and compact about 10 lbs. (4.5 kg)
  • Battery 4 hours plus duration

Aeroflex ALT-8015 FMCW/Military Pulse Radio Altimeter Test Set

  • Tests military pulse radio altimeters: AN/APN-171(V), AN/APN-194(V) and AN/APN-209(V), including LPI variants
  • Tests FMCW radio altimeters including CDF types
  • Fast detector for tracking LPI radio altimeters with TX power management
  • Direct-connect to UUT transmit/receive port or to installed system via antenna couplers
  • Ratio-metric RF loop test allows TX, RX, antenna or feeder faults to be identified
  • Programmable multi-leg climb/descend profiles
  • Large color touch-screen display with simple user interface
  • Remote control interface (Ethernet)
  • Lightweight and compact <10 lbs. (4.5 kg)
  • Battery 4 hours plus duration
  • Software upgradeable

Aeroflex APM-424 MK XII/XIIA Test Sets

  • DoD AIMS 03-1000A Mark XIIA (Mode 5 level 1 and 2) certified *
  • Transponder Test Set Modes 1, 2, 3/A, C, 4, S, and Mode 5 * (Level 1 & 2)
  • Mode S Elementary and Enhanced Surveillance
  • Interrogator Test Set Modes 1, 2, 3/A, C, 4, S, TCAS, ETCAS and Mode 5 * (Level 1 & 2)
  • Self-diagnostic
  • Factory upgrade kits available for APM-424(V)3 and TS-4530 units
* APM-424(V)5 only

Aeroflex ATB-7300 Nav/Comm Test System

Standard Features
  • Test ILS / VOR / MKR / ADF and VHF COMM functions, including SELCAL
  • Over-the-air and return-to-service testing
  • AM, FM and data capability
  • SCPI compatible software driver command sets
  • GPIB remote programming interface
  • 100 kHz to 3 GHz RF signal generator range
  • Large touch-screen color display
Optional Features
  • 250 KHz to 3 GHz spectrum analyzer, with custom analysis tools
  • 406 MHz COSPAS/SARSAT Beacon (ELT) testing
  • VHF Comm TX and DME TX analyzer

Aeroflex ATC-5000NG

  • Software-driven design allows for field updates for adding new features, capability or modifications due to industry changes
  • ADS-B Target Generator
  • ADS-B squitter encode/decode
  • DO-260, DO-260A and DO-260B data parsing
  • DO-260B canned tests available (option)
  • Generates ATCRBS/Mode S interrogations
  • Multi-receiver test capability (option)
  • UAT TX/RX capability (optional)
  • Pulse and frequency measurement
  • 10.4 inch touch screen LCD display for operator control of all test set capabilities
  • Remote controlled via GPIB or Ethernet
  • Two independent transmitters and receivers
  • TX/RX data logging capability
  • Full diversity testing capability
  • Data parsing in engineering units

Aeroflex Databus Analyzers/T1200B

These products are now manufactured and sold by Advanced Technical Group (ATG).
For more information, please read the customer letter for details.

Aeroflex Fuel Interfaces

Cobham AvComm supports many rotary and fixed-wing aircraft platforms with an extensive library of aircraft specific interface cables and units.  Combined with a Cobham AvComm Fuel Quantity Test Set, the Cobham AvComm test solution provides complete functional testing and troubleshooting of the fuel quantity system.  If you are unable to find your aircraft listed here, Cobham AvComm also offers design services for the development of new interfaces and aircraft test procedures.    
Available through your GSA Supplier  

Aeroflex GPSG-1000 Portable Satellite Simulator

  • GPS signals simulated: L1, L1C*, L2C*, L5*
  • Galileo signals simulated: E1, E5**, E5a**, E5b**
  • Simultaneous GPS/Galileo simulation
  • WAAS/EGNOS SBAS simulation
  • Static and dynamic simulations via NMEA-0183 File Record and Playback
  • 12 channel configuration available with upgrade path (RAIM supported)
  • Programmable space vehicle (SV) parametrics and health
  • User or built-in GPS receiver referenced time and date
  • PVT data available via RS-232
  • User Defined Data Transferable between Linked GPSG units
  • Remote control interface Ethernet
* For tracking of L1C, L2C or L5 signals some receivers require synchronized L1 transmissions.
** For tracking of E5 signals some receivers require synchronized E1 transmissions.

Aeroflex IFF-45TS MK XIIA/TACAN Bench Test Set

  • MK XIIA AIMS certified for Level 1 and Level 2
  • Accommodates DOD AIMS 04-900A Option A (KIV-78) and Option B (KIV-77)
  • Dual I/O for diversity testing of transponders or SUM/DIFFERENCE on interrogators
  • Separate connections for direct or over-the-air testing
  • Software defined radio design allows waveform flexibility and future growth potential
  • Dual signal generator design allows coordinated signal production for interference and echo testing
  • Remote interfaces consist of RS-232, Ethernet and GPIB
  • Aeroflex GUI allows easy access to test features
  • Industry wide use in development and end item testing of transponders and interrogators

Aeroflex IFF-7300S Series IFF/Crypto/TACAN Automated Test System

Features
  • Tests MARK XIIA IFF transponders and interrogators
  • Tests TACAN receiver-transmitters
  • Can be configured to test KIV-77 and KIV-78 crypto appliqués
  • Large Touch-screen color display
  • Manual or automated testing
  • Test reports are automatically generated
  • Includes industry leading Aeroflex proprietary THORsi Test Executive
Benefits
  • Ease of use - navigating between test modes is as easy as pushing a button. 
  • Affordable – no need to purchase multiple stations that take up valuable lab space; purchase only the Test Program Sets (TPS) you need today
  • Expandable - to add test capability, simply purchase additional TPS’s
  • In-house test/repair capability eliminates long delays and reduces number of LRU spares needed

Aeroflex IFR 4000 Nav/Comm Flightline Test Set

  • Accurate measurement of 121.5/243 MHz emergency beacon transmitter frequency, output power, modulation (AM). Headphone audio output to monitor swept tone *
  • Accurate measurement of 406 MHz COSPAS/SARSAT emergency beacon transmitter frequency, output power. Decode and display of all location and user protocols *
  • Accurate measurement of HF transmitter, frequency, output power, modulation (AM and SSB USB/LSB) receiver sensitivity
  • Accurate measurement of VHF/UHF transmitter, frequency, output power, modulation (AM and FM and receiver sensitivity)
  • Generation of ARINC 596 Selective Calling Tones
  • Accurate measurement of VHF/UHF antenna and or feeder SWR (Standing Wave Ratio)
  • Simulation of Localizer and Glideslope (CAT I, II and III) signals with variable DDM settings
  • Swept Localizer DDM for coupled Auto Pilot testing (Simultaneous Localizer, Glideslope and Marker signals)
  • Simulation of Marker Beacon, Selectable Airways (Z), Outer and Middle Marker Tones
  • Guided Test capability cuts down total test time

Aeroflex IFR 6000 Ramp/Flightline Test Set

  • Individual test modes: Mode S, ATCRBS Transponder, DME, TCAS, TIS, ADS-B MON/ ADS-B GEN (DO-260A/B), 978MHz UAT
  • Large keys for gloved operation
  • Simple user interface
  • Lightweight and compact at 8 lbs.
  • Battery operation 6 hours plus between charges
  • Fully FAR part 43 appendix F compliant
  • Transponder Auto-Test
  • Data dump of transponder test results to PC
  • Elementary and Enhanced Surveillance parameters (DAP’s)
  • Transponder level automatically determined and capability checked to avoid nuisance Auto-Test failures
  • Comprehensive GICB test
  • Configuration files for different classes of transponder
  • Comprehensively tests any DME channel
  • including track sensitivity
  • User selectable TCAS scenarios
  • TCAS fast scenario feature uses Auto Altitude and Converge to ensure automatic collision at zero range
  • Over-the-air or direct-connect operation
  • Parametric measurements including TX power and frequency
  • USB flash drive software update via web site download
  • Optional ADS-B capabilities are DO-260A/B compliant
  • Optional TCAS and 978 MHz UAT capability
  • Optional testing using UC-584 Coupler

Aeroflex IFR 6015 Military Flightline Test Set

  • Mode S level 1-4, (level automatically determined), FAR Part 43 appendix F, (including proposed Eurocontrol extension), Eurocontrol Elementary and Enhanced Surveillance
  • Quickly and easily provides accurate measurement of transponder transmitting frequency, power and receiver sensitivity. Predetermined configurations for testing any class of transponder.
  • ICAO Annex 10 amendment 77
  • ADS-B TX/RX
  • TIS
  • IFF Modes 1 & 2 and TACAN
  • Tests any DME 1 MHz spaced X or Y channel. Measurements include: interrogator transmitter frequency/peak power, Pulse Repetition Frequency (PRF), P1/P2 width and pulse spacing. Provides accurate range and velocity simulation, station ident, squitter control.
  • TACAN Test Modes; T/R Norm, T/R Range Only, T/R Inverse, A/A Beacon, A/A Range Only and A/A Inverse
  • Simulates the airborne environment necessary to allow verification/certification of proper operation of an aircraft’s TCAS I and II as well as E-TCAS installations.
  • Detachable directional antenna
  • Large 5.7-inch LCD display
  • Simple user interface
  • Lightweight at less than 8 lbs.

Aeroflex IRIS 2000/IRS 1200 ATE Software Revision Service

Aeroflex offers Software Revision Service (SRS) for its two legacy Avionics ATE Systems: IRIS 2000 ATE and the IRS 1200 ATE. SRS is a maintenance program designed to keep your Test Program Set (TPS) software up to date with the latest OEM test specifications. 

Aeroflex PSD30-2AF Universal DC Fuel Capacitance Test Set

  • Solid-state circuits and Liquid Crystal Display for low power consumption and high reliability. LCD is backlit for enhanced viewing.
  • Tested and approved for use with fuel in tanks.
  • Portable, lightweight, sealed, high-impact ABS case reduces weight of tester with batteries installed to less than 12 pounds.
  • Small size permits testing in restricted spaces - 10.5"W x 14"L x 6"H. Ideal for Forward Area Deployment.
  • Easy to operate; choose the FUNCTION desired and read the measured capacitance, insulation or voltage on the display.
  • Auto-ranging circuit and 4.5 digit display permit resolution to .01 Pf in capacitance functions and .01 meg in insulation (megger) function.
  • Digital Multi-Meter (DMM) function reads external voltage up to 40 VDC.
  • BATTERY CHECK function reads % of usable battery charge remaining.
  • Recommended annual calibration interval. Stability of the measuring circuit eliminates need to recalibrate each time unit is used.
  • Two year standard warranty.
  • CE Marked - 

Aeroflex PSD60-1AF Military AC Fuel Capacitance Test Set

  • Solid-state circuits and LCD backlit display for low power consumption and high reliability
  • Battery-powered for complete portability and ease of maintenance
  • Lightweight aluminum case has hinged compartment in lid for test lead storage
  • Small size permits testing in restricted spaces
  • Push-button "extended range" switch permits readings up to 9,999 pf or 10,000 megohms - over-range indication on LCD
  • Tested and approved for use in any function with fuel in tanks; battery power eliminates need for voltage (safety) checks

Aeroflex PSD60-2R AC Fuel Capacitance Test Set

  • Compatible with AD 98-20-40 & AD 99-03-04 compliant aircraft (Mod 6 and above)
  • Modular design for high reliability and low maintenance
  •  Closed box calibration using front panel controls - performed annually
  • Battery powered with percent of charge displayed
  • Maintenance codes displayed to aid in troubleshooting
  • Distance-to-Fault (DTF) Mode determines the "length" of the wire or the approximate distance to a break in the wire or shield
  • Large selection of aircraft specific interface cables readily available

Aeroflex PSD90-1C AC/DC Fuel Capacitance Test Set

  • Easy to operate/calibrate
  • Annual calibration
  • Lightweight / portable
  • Rechargeable battery or externally powered
  • Percent of battery capacity displayed
  • Self-test on power-up
  • Measures DC voltage
  • Manual or Auto Ranging
  • 2 and 3 Wire Meggar
  • Compliant with Boeing Spec 10-61959 Rev H
  • MIL-STD-810 Method 511.4 certified
  • Traceable to NIST
  • Tests any AC or DC capacitive fuel, water, LOX/engine oil or other AC capacitive system*

Aeroflex RF Expansion Module (RFEM)

  • Aeroflex designed RF test system, fully integrated into the ATEC® Series 6
  • Simple Ethernet interface between RFEM and ATEC® Series 6 permits easy retrofit to existing ATE installations
  • Cassidian Test Executive interface offers many advantages to the test operator, including visual test set-up instructions and a full menu of performance options and data handling
  • Global service and support provided jointly by Cassidian and Aeroflex
  • Extensive CMM-listed TPS library in development or planned, covering Nav, Comm, TCAS, Transponder, SATCOM, GPS, and other RF systems
  • Complete RFEM and TPS information can be consulted on the Cassidian Customer Support and Services MyATE Internet web site
  • Our objective is to offer test coverage of RF products from all major OEMs

Aeroflex RGS-2000NG TCAS Test Set

  • Software-driven design allows for field updates for adding new features, capability or modifications due to industry changes
  • TCAS and ADS-B Target Generator
  • Simulates 32 dynamic/400 static intruders
  • ADS-B squitter encode/decode
  • More test capability than any tester in the market, all packed into one box
  • Pulse and frequency measurement
  • Transponder test option for Modes A, C, S
  • Optional Command set emulation for SDX-2000, ATC-1400A and S-1403DL
  • 10.4 inch touch screen LCD display for operator control of all test set capabilities or can be remotely controlled via GPIB or Ethernet
  • Four port antenna simulation
  • Hybrid surveillance
  • Six independent transmitters and two receivers
  • Data parsing for analysis

Aeroflex UC-584 Universal Transponder Antenna Coupler

  • Reliable FAR Part 43 Appendix ‘F’ ERP and MTL testing in high multi-path environments
  • Provides >20 dB of antenna isolation for Mode S transponder altitude and diversity tests
  • <1 dB repeatability
  • Rugged design for ramp use
  • Fits most ‘Shark Fin’ L-Band antenna’s
  • Quick action antenna grip/release action