Displaying 1 - 4 of 4

Abaco VME-1182A 64-Channel Isolated Digital Input Board with Multifunctional Intelligent Controller

  • Interrupt level is user selected
  • Complies with ANSI/IEEE STD C37.90.1-1989 surge protection when used with companion suppression panel (e.g., VME-3459)
  • 64 optically isolated inputs
  • Multifunctions available per channel: COS; SOE; pulse accumulation; programmable debounce times; time tagging
  • Short or standard, supervisory, nonprivileged, or either access
  • COS selections (disabled), rising edge (low-to-high transition), falling edge (high-to-low transition), or any edge
  • COS functions software controlled on a channel-by-channel basis
  • 1.0 ms measurement resolution
  • Debounce times software controlled on channel-by-channel basis
  • Pulse accumulation (0 to 65,535 pulses)
  • SOEs monitoring on channel-by-channel basis
  • 5 to 60 VDC or 110 to 240 VAC
  • 1,500 VDC or 1,100 VRMS channel-to-channel and channel-to-VMEbus isolation

Abaco VME-2540 Intelligent Counter/Controller 24-channel slave I/O module

  • RS-422 differential interface with support for single-ended TTL inputs
  • Options allow configurations of 4, 8, 16, and 24 interfaces
  • On-board 15 MHz 68HC000 CPU
  • A32/A24/D32/D16/D8 (EO) VME slave interface, 64 Kbyte VMEbus memory window
  • Timer/periodic VMEbus interrupter - 0.0076 to 1,000 Hz
  • Quadrature position measurement - sin/cos up to 1 MHz, 32-bit counters, limit/modulo checking Integer period/pulse-width measurement 16- and 32-bit, discrete or continuous; low data transport lags
  • Square wave/pulse train generation - 0.0076 Hz to 2.5 MHz
  • Period/pulse-width measurement 400 ns to 8.5899 x 106s (32-bit floating point), 400 ns to 858s (32-bit unsigned integer)
  • Event counting - up to 4 giga events
  • Frequency measurement 1.16 x 10-3 Hz to 2.5 MHz

Abaco VME-9081 IIOC (Intelligent I/O Controller)

  • Intel Ultra Low Voltage Celeron 1.07 GHz processor
  • 512 MByte SODIMM
  • Host interface options:
    • GE’s 5565 Reflective Memory
    • 10/100 Mbit Ethernet
    • Embedded (IIOC as slave CPU)
  • Firmware provides all required support for scanning inputs, updating outputs, EU and data-type conversions, fault detection, fault isolation, and error reporting
  • Optional host software support utilities
    • I/O point manager
    • Report generator
    • Configuration downloader
    • Real time interface software
    • Source code available in C
  • Supports a wide variety of GE’s General Purpose I/O Boards
  • Available CRT-based control panel
  • Low cost expansion

Abaco VME-9150 IIOC Communications Controller

  • Single host communications links multiple RFM (Reflective Memory) Intelligent I/O Controllers (IIOCs)
  • Single point fault detection and isolation
  • Minimizes host overhead
    • Data buffers may contain points of all I/O types for multiple controllers
    • Simplifies host data transfers
  • High Speed host interface using RFM or Ethernet
  • Extensive host software support package
  • Local I/O exercising support
  • Slave chassis power down support