Products

Displaying 1 - 19 of 19

NH Research 4312 Series Modular DC Load 120V

  • 3 sizes – 150, 300, & 600W @ 120V with advanced measurement capability built-in
  • Mix & match loads for maximum configuration flexibility
  • Up to 16 loads in a single, 8 3/4″ / 5U Model 4300 chassis
  • Front loaded & front connections
  • 3 voltage and 3 current ranges for improved accuracy
  • High-resolution waveform capture for analysis of dynamic transients
  • Isolated digital inputs & outputs for test fixture support
  • PC/LAN control with LabVIEW & IVI drivers

NH Research 4350 Series Modular Programmable DC Electronic Load

  • 3 sizes – 150, 300, & 600W @ 500V with advanced measurement capability built-in
  • Mix & match loads for maximum configuration flexibility
  • Up to 16 loads in a single, 8 3/4″ / 5U Model 4300 chassis
  • Front loaded & front connections
  • 3 voltage and 3 current ranges for improved accuracy
  • High-resolution waveform capture for analysis of dynamic transients
  • Isolated digital inputs & outputs for test fixture support
  • PC/LAN control with LabVIEW & IVI drivers

NH Research 4600 Series Programmable AC Electronic Loads

  • 6 sizes – 3 to 36kW, 30 – 360A, 50 – 350V
  • Single and 3-phase configurations
  • 12 high-accuracy internal measurements
  • 100-step macro for per cycle loading changes
  • User-defined waveforms
  • CC, CR, CV, CP, SC, UPF and CNL emulation modes
  • PC control using Lab VIEW and IVI drivers
  • LAN, RS232, USB communication interface
  • PC softpanel GUI with current, voltage & power waveform display

NH Research 4700 Series High-Current DC Loads

  • 8 sizes – 1 to 36kW @ 120 or 600V
  • High-resolution waveform capture for analysis of dynamic transients
  • 18 built-in, precision voltage, current, power and timing measurements that eliminate additional dedicated measurement instruments
  • Isolated digital inputs and outputs for test fixture support
  • PC/LAN control using LabVIEW & IVI drivers
  • Optional touch-panel user interface

NH Research 4760 Series High-Voltage DC Loads

  • 600V, 1kW / 50A to 36kW / 1800A DC Loads
  • 3 Voltage and 2 current ranges
  • High accuracy 1 kW low power range
  • Advanced built-in measurements
    • 100kSamp/s waveform capture
    • Overshoot / Undershoot
    • Rise-Time / Fall-Time / Settling-Time
  • Test fixture support
    • 4 digital outputs
    • 2 digital inputs
  • Complex load profile playback
  • Multiple hardware control options
    • Manual touch-panel user interface
    • emPower™ test executive
    • PC/LAN control using LabVIEW & IVI Drivers

NH Research 5500 Series Universal UPS/Inverter DC Power Supply Test System

  • Digital measurement system (DMS)
    • 2 waveform digitizers
    • 2×16, 100MHz multiplexer
    • Expandable input measurement channels
  • Maximum configuration flexibility
  • Turn-key test system with included test controller
    • emPower™ test executive

NH Research 5600 Series Universal Tester

  • Maximum configuration flexibility with multi-bay capacity
  • Digital measurement system 2 Waveform digitizers and 2×16, 100 MHz multiplexer
  • Expandable input measurement channels
  • Common interface panel
  • emPower™ Test Executive

NH Research 5710 Series Engineering Characterization Test System

  • NEW! Tektronix MDO-Series Mixed Signal Oscilloscope
  • Unlimited voltage, current & timing measurements relative to digital signals.
  • Library of design verification test routines reduces program development time
  • Configuration flexibility

NH Research 9200 Series High-Power Battery Charge/Discharge Test System

  • Best configuration flexibility
  • Custom waveform/profile generation
  • Microsecond voltage, current & mode transition times
  • Built-in digital measurements with charting & scope displays
  • 3 test system control options including a Touch-Panel interface
  • Expandable from 12 to 252kW with 40 ,120 or 600V bi-directional DC loads
  • Regenerative, 87% efficiency of discharge power returned to AC mains
  • Multiple safety layers to protect battery being tested
  • Battery emulation and burn-in applications

NH Research 9210 Series Single Channel Battery Charge / Discharge Test System

  • Smaller footprint makes it easier to move within a lab (roughly half the size of the 9200)
  • Custom waveform/profile generation
  • Sub-mS voltage, current & mode transition times
  • Built-in digital measurements with charting & scope displays
  • Internal controller with software & connections for an external monitor & keyboard
  • Expandable from 12 to 252kW with 40, 120, or 600V bi-directional DC loads
  • Regenerative, 87% efficiency of discharge power returned to AC mains
  • Multiple safety layers to protect battery being tested
  • Battery emulation & burn-in applications
  • Create, run, monitor, chart & report UUT profiles without writing any code

NH Research 9220 Series Low Voltage/High Current Battery Charge/Discharge Test System

Automated Characterization, Power Cycling, & Life-Cycle Testing of Low Voltage/High Current Batteries
  • Single output up to 40V/3,600A/72kW per system
  • Parallel expansion up to 7,200A
  • Built-in digital measurements including Ah & kWh
  • Multiple safety layers to protect battery/DUT
  • SCPI, VXI-11, & LabVIEW control via LAN interface
  • NI-Compliant LabVIEW Drivers
  • 87% efficiency returning discharge power to facility
  • Crane/hoist lifting hangers & robust casters

NH Research 9300 Series High Voltage Battery Test System

  • Wide Operating Envelope at 100kW per cabinet
  • Scalable to 1.2MW/4000A
  • Regenerative, greater than 90% efficiency of discharge power returned to AC mains
  • Built-in digital measurements with charting & scope displays
  • Current, Voltage & Mode transitions in <2 mSec
  • Battery Emulation Mode
  • Touch Panel, LabVIEW® & IVI Drivers
  • Enerchron® Test Executive

NH Research 9420 Series AC Power Source

  • Voltage Range – 175/350VRMS, 200/400VDC
  • 7 models – 8kW/21kVA to 96kW/252kVA
  • Unique configuration flexibility provides for single, split, three-phase operation plus full-power DC
  • HiVAR design eliminates derating nominal power due to reactive loads
  • Frequency – 30 to 880Hz
  • High-resolution waveform digitizer & scope display
  • Precision ultra-low current measurements
  • Seamless, constant-power operating envelope
  • Built-in 9” touch-panel user interface for manual control & measurement display
  • Graphical waveform editor for user-defined waveforms
  • High-level line disturbance programming Macros
  • External PC option to host NHR emPower® Test Sequencer
  • Alternate programming in LabVIEW, native SCPI, & other IVI-compliant languages
  • Improved power density results in half the panel height of a traditional AC source

NH Research 9430 Series Regenerative 4-Quadrant AC Load

  • 8 Sizes – 4 to 96kW
  • Single, Split or Three-Phase programmable
  • 10 to 350VAC
  • 30 to 880Hz
  • DC operation to 10 to 400VDC
  • Reactive power capability 2.6 x Real Power
  • Sink power regenerated back to facility with >90% efficiency
  • Power factor range: -1 to +1
  • Crest factor range: 1.414 to 4.000
  • High-resolution waveform digitizer
  • 9” Touch-Panel user interface
  • High power density/minimum rack space

NH Research Data Acquisition (DAQ) Instruments

  • Single box including Voltage, Temp & resistance temperature detector (RTD)
  • 24-bit DAQ-per-channel design
  • Wide measurement ranges
  • Fully isolated channel-to-channel design
  • No test channel-to-DAQ (data acquisition device) usage dependency
  • Easy expansion to higher channel count

NH Research Enerchron® 2.0 Test Management Software

  • Continuous measurement collection, monitoring and archiving
  • Powerful Test Sequence Editor that optimizes flexibility and intuitiveness
  • Ability to instantly scale test sequences to other like products
  • Dynamic, configurable reporting and charting
  • Ability to add new test system hardware onto the core software package
  • Import and dynamically scale Drive Cycle tables
  • Eliminate Post Processing data

NH Research S400 Series Low-Power Production Testers

  • Full-capability test system in a 6-slot chassis for interchangeable loads and DC sources
  • 3-sizes of compact, space-saving cabinets
  • Embedded measurement system with 12 input channels and 100kSamp/sec waveform capture
  • emPower™ Test Executive
  • PC-LAN control

NH Research S450 Series DC Power Supply Test System

  • Preconfigured fully-capability test system in a 35” rack
  • Interchangeable DC loads and sources
  • Embedded Measurement System (EMS)
    • 100 kSamp/s waveform capture
    • 12 channel measurement system
  • emPower™ test executive control
    • PC/Serial interface
    • USB-Serial ∓ LAN-Serial available

NH Research S600 Series Multi-Channel Testers DC Power Supply Test System

  • Maximum test throughput through parallel testing of multiple devices & outputs
  • Ease of reconfiguration or expansion through front-loading, card-based instruments
  • Built-in waveform digitizers on all instruments
  • Space-saving design
  • emPower® Test Executive