Products

Displaying 1 - 25 of 40

PowerGridm - 1000 Watts / VA Standalone UPS

  • Ruggedized 1U 1000 Watts / VA UPS weighing in at 30 Lbs.
  • Stack and Interconnect Design for 1000/2000/3000/4000 Watts.
  • Dual Hot Swap Battery Modules @ 6 lbs – 15+ Min Hold Time.
  • Field Replaceable AC Input Power Module.
  • Universal AC Input of 100-264 VAC and from 47 – 63, 400 Hz.
  • VAC Output Voltage of 120V 60 Hz.
  • Dual Computer Controlled Inverter N+1 Design.
  • Over Voltage Capacity for Managed In-Rush and Start up Demands.
  • Over Voltage and Over Temperature Protection Circuits.
  • Audible Power Loss Alarm with Enable/Disable Switch.
  • Lightning Protection with Common Safety Ground Connection.

Powergridm - 1500 VA UPS Unit – BackPlane Ready

  • Ruggedized 1U 1200 Watts / 1500 VA UPS weighing 27 Lbs.
  • Stack & Interconnect Design for 1200/2400/3600/4800/6000 Watts. – 2 interconnected 5U BPMs allow for a total: 12,000 Watts.
  • Hot Swap Battery Module @ 6 Lbs Each – 12+ Min Hold Time.
  • Field Replaceable AC Input Power Module
  • Universal AC Input of 100-264 VAC and from 47-63, 400 Hz.
  • Computer Controlled Inverter Design.
  • BPM based SNMP Based Network Connectivity for Monitoring and Reporting (SNMP V3 Optional).
  • Over Voltage Capacity for Managed In-Rush and Startup Demands.
  • Over Voltage and Over Temperature Protection Circuits.
  • Lightning Protection with Common Safety Ground Connection.

PowerGridm - 1500 VA – 1200 Watts Standalone UPS

  • Ruggedized 1U 1200 Watts / 1500 VA UPS weighing in at 27 Lbs.
  • Stack and Interconnect Design for 1200/2400/3600/4800/6000 Watts.
  • Hot Swap Battery Module @ 6 Lbs Each – 12+ Min Hold Time.
  • Field Replaceable AC Input Power Module.
  • Universal AC Input of 100-264 VAC and from 47-63, 400 Hz.
  • 48VDC power input support.
  • Computer Controlled Inverter Design.
  • SNMP Based Network Connectivity for Monitoring and Reporting (SNMP V3 Optional).
  • Over Voltage Capacity for Managed In-Rush and Startup Demands.
  • Over Voltage and Over Temperature Protection Circuits.
  • Lightning Protection with Common Safety Ground Connection.

PowerGridm - 25Ft. Input Power Cable

  • PowergridM UPS VAC Power Input connection to VAC power source
  • PG-BXM VAC Power Input connection to VAC power source

PowerGridm - 2Ft. Output Power Cable

  • PG800-UPS VAC Output Power connection to PG-RPIM-STD VAC Input Power connection
  • PG800-UPS VAC Output Power connection to PG-RPIM-LBI-STD VAC Input Power connection
  • PG800-UPS VAC Input Power connection to PG-PPC-PDB-5P VAC Output Power connection
  • PG-BXM VAC Input Power connection to PG-PPC-PDB-5P VAC Output Power connection

PowerGridm - 3000 VA – 2400 Watts Standalone / Tactical UPS

  • Ruggedized 2U 2400 Watts / 3000 VA UPS weighing in at 50 Lbs.
  • Available in 1/2/3 phase input power configurations.
  • Stack and Interconnect Design for 2400/4800/7200/9600 watt configurations.
  • Hot Swap Battery Modules @ 12 Lbs Each – 12+ Min Hold Time.
  • Universal AC Input of 100-264 VAC and from 47 – 63, 400 Hz, and DC Input at 42 – 56 VDC.
  • VAC Output Voltage of 120V 60 Hz / 230V 50 Hz.
  • Dual Computer Controlled Inverter Design.
  • SNMP Based Network for Power Management and Reporting.
  • Over Voltage Capacity for Managed In-Rush and Start up Demands.
  • Over Voltage and Over Temperature Protection Circuits.
  • Lightning Protection with Common Safety Ground Connection.

PowerGridm - 3U/4U/5U Back Plane Module - 24 VDC Input - PG800 Version

  • Single 100-264 VAC Input Power for the integrated Stack. (Optional Voltages and Phase configurations available).
  • A 22-30 VDC Input Power Connection for the integrated Stack.
  • Critical Equipment VAC Connections for Connection of Equipment.
  • Optional Non-Critical Equipment VAC Connections (Power Shedding) with No Extended Battery Support.
  • Consolidated SNMP Port for Network Monitoring of Stacked Units.
  • Consolidated Lightning Protection and Safety Ground.
  • 3.5 VDC primary power loss alarm port for connection of a remote audio or visual indicator.
  • Extended Air Intake and Exhaust Plenums for Attached Units.

PowerGridm - 3U/4U/5U Back Plane Module - 48 VDC Input - PG1500 Version

• Single 100-264VAC Input Power for the integrated Stack. (Optional Voltages and Phase configurations available).
• Multi-BackPlane Synchronization Port for BackPlane stacking.
• Critical Equipment VAC Connections for Connection of Equipment.
• Optional Non-Critical Equipment VAC Connections (Power Shedding) with No Extended Battery Support.
• Consolidated SNMP Port for Network Monitoring of Stacked Units.
• Consolidated Lightning Protection and Safety Ground.
• 3 to 5 VDC primary power loss alarm port for connection of a remote audio or visual indicator.
• Extended Air Intake and Exhaust Plenums for Attached Units.

PowerGridm - 6Ft. Output Power Cable

  • PG800-UPS VAC Output Power connection to PG-RPIM-STD VAC Input Power connection
  • PG800-UPS VAC Output Power connection to PG-RPIM-LBI-STD VAC Input Power connection
  • PG800-UPS VAC Input Power connection to PG-PPC-PDB-5P VAC Output Power connection
  • PG-BXM VAC Input Power connection to PG-PPC-PDB-5P VAC Output Power connection

PowergridM - 800 Watts / VA Standalone UPS – Tactical UPS

  • Ruggedized 1U 800 Watts / VA UPS weighing less than 26 Lbs.
  • Stack and Interconnect Design for 800/1600/2400/3200 Watts.
  • Dual Hot Swap Battery Modules. 3 Lbs Each – 9+ Min Hold Time.
  • AC/DC Input Power Connections with Auto Sensing and Switching.
  • Dual Computer Controlled Inverter N+1 Design.
  • Over Voltage Capacity for Managed In-Rush and Startup Demands.
  • Over Voltage and Over Temperature Protection Circuits.
  • SNMP Based Network Connectivity for Monitoring & Reporting.
  • Primary Power Bypass Switch and Audible Power Loss Alarm.
  • Lightning Protection with Common Safety Ground Connection.

Powergridm - 800 Watts UPS – BackPlane Module BPM DC Output – Military UPS – Military Power Conditioner

  • Ruggedized 1U 800 Watts UPS weighing less than 26 Lbs.
  • DC Output can be configured for 12VDC, 24VDC, 28VDC, or 48VDC.
  • Stack & Interconnect Design for 800/1600/2400/3200/4000 Watts.
  • Dual Hot Swap Battery Modules @ 3 Lbs Each – 9+ Min Hold Time.
  • AC/DC Input Power BackPlane Connections with Auto Sensing/Switching.
  • Dual Computer Controlled Inverter N+1 Design.
  • Over Voltage Capacity for Managed In-Rush and Startup Demands.
  • Over Voltage and Over Temperature Protection Circuits.
  • SNMP Based Network Connectivity for Monitoring & Status Reporting hosted within the BPM.
  • Audible Power Loss Alarm.
  • Lightning Protection & Safety Ground Connection via the BPM.

PowerGridm - AC Power Distribution Unit – Military Power Conditioner

  • Allows for Consolidation of VAC Input Power from the Source to a Stack.
  • Consolidates cable runs when extending the RPIM to a remote location.
  • Individual Push/Pull Based Breakers for Each Equipment Connection.
  • Remove and Rotate Mounting Brackets for Maximum Flexibility.
 

PowerGridm - Battery Expansion Module 24 VDC / 28 VDC

  • Connects to any PowergridM 800 UPS via VDC Input Connector.
  • Replicates the UPS VDC Input Power Connector for DC power source.
  • Hosts 2 removable Cold PakTM battery trays each containing 3    PowergridM battery modules.
  • Provides LED Operational Status Indicators for each battery tray.
  • Same physical 1U size chassis package as the PowergridM 800 UPS.
  • Each BXM provides a minimum of 27+ minutes of extended power.
  • MIL-STD 1275 compliant for VDC charging of batteries.

PowerGridm - Battery Expansion Module 48 VDC Output – Military Battery Backup System UPS

  • Connects to any 1500/3000 UPS via VDC Input Connector.
  • Replicates the UPS VDC Input Power Connector for DC power source.
  • Hosts 1 removable Cold Pack Battery tray each containing 8 PowergridM battery modules.
  • Provides LED Operational Status Indicators for each battery tray.
  • Same physical 1U size chassis as the PowergridM 1500 VA UPS.
  • Each BXM provides a minimum of 30+ minutes (Model Dependent).

PowerGridm - Battery Expansion Module – BackPlane 24 VDC / 28 VDC Output – Military Battery Backup System

  • Connects to any available slot in the BPM.
  • Hosts 2 removable Cold PakTM battery trays each containing 3 PowergridM battery modules.
  • Provides LED Operational Status Indicators for each battery tray.
  • Same physical 1U size chassis package as the PowergridM UPS.
  • Each BXM provides a minimum of 27+ minutes of extended power.
  • MIL-STD 1275 compliant for VDC charging of batteries.

PowerGridm - Battery Expansion Module – BackPlane 48 VDC Output – Military Battery Backup System UPS

  • Plugs into any available slot in the BPM BackPlane.
  • Hosts 1 removable Cold Pack Battery tray each containing 8 PowergridM battery modules.
  • Provides LED Operational Status Indicators for each battery tray.
  • Same physical 1U size chassis package as the PowergridM UPS.
  • Each BXM provides a minimum of 24+ minutes of hold time.

PowerGridm - BXM DC Input Cable - PCB 25F

  • PowergridM UPS VDC Input connection to VDC power source
  • PowergridM BackPlane VDC Input connection to VDC power source
  • PG-BXM VDC Input connection to VDC power source

PowerGridm - BXM DC Power Interconnect Cable 2 Ft

  • PG-BXM Output VDC Power connection to PG800-UPS VDC Input Power connection
  • PG-BXM Output VDC Power connection to PG-BXM-PDB-5P VDC Power connection
  • PG-BXM Output VDC Power connection to PG-BXM-PDB-11P VDC Input Power connection
  • PG800-UPS Input VDC Power connection to PG-BXM-PDB-5P VDC Power connection

PowerGridm - BXM DC Power Interconnect Cable 6 Ft

  • PG-BXM Output VDC Power connection to PG800-UPS VDC Input Power connection
  • PG-BXM Output VDC Power connection to PG-BXM-PDB-5P VDC Power connection
  • PG-BXM Output VDC Power connection to PG-BXM-PDB-11P VDC Input Power connection
  • PG800-UPS Input VDC Power connection to PG-BXM-PDB-5P VDC Power connection

PowerGridm - DC Power Distribution Unit

  • Allows for Consolidation of VDC Power from the Source to a Stack.
  • Consolidates cable runs when extending VDC to a remote location.
  • Individual Push/Pull Based Breakers for Each Equipment Connection.
  • Remove and Rotate Mounting Brackets for Maximum Flexibility.

PowerGridm - EMI Filter Kit

  • Filters for PowerGridM UPS rear air intake and exhaust ports

PowerGridm - High Amperage Cable 25Ft

  • BackPlane or Stacked VAC Power Input connection to VAC power source.

PowerGridm - High Amperage Cable 25ft

  • PG-BXM-PDB-5P dual VDC Input connections to VDC power source
  • PG-BPMx dual VDC Input connections to VDC power source

PowerGridm - LBI Data Cable

  • PowergridM UPS LBI Data Output connection to LBI Data Input connection.

PowerGridm - PG BXM – Spare Battery Module 24 VDC – Mobile Shelter UPS

  • Hot Swap Lithium Iron Phosphate (LIP) Cold PakTM design.
  • Exhibits less than 10° rise over ambient on full discharge.
  • Weights less than 8 Lbs.
  • Embedded Power Management and Charging Circuitry.
  • Conservatively rated at 2500 full Charge/Discharge cycles.
  • Rated at 5 to 10 years shelf line for stored modules.
  • Can be used in either the PG-BXM24 or the PG-BXM-BPM24 units

Pages