Products

Displaying 1 - 11 of 11

Luna - Fiber Optic Switch

  • High Port Count
  • Rapid Switching Time at 30 ms
  • Low Insertion Loss (< 1.5 dB)
  • Low Wavelength Dependent Loss (< 0.3 dB)
  • O, C and L band operation
  • USB 2.0 Interface

Luna - OBR 4200 - Optical Backscatter Reflectometer

  • Verify quality of optical fiber cable assemblies, connectors and short-run networks
  • Troubleshoot and distinguish between macro-bends, splices, connectors and breaks
  • Locate insertion loss points – save hours of troubleshooting time
  • Verify return loss of multiple points in a fiber assembly or harness simultaneously
  • Verify and maintain aircraft and shipboard networks
  • Customize GUI for automated pass/fail verification of your fiber assembly using software development kit

Luna - OBR 4600 - Optical Backscatter Reflectometer

  • “Zero Dead Zone” reflectometer
  • Measure 30 m with 10 μm sampling resolution
  • 80 dB dynamic range
  • Backscatter-level sensitivity (-130 dB)
  • High-speed scanning (1 m segments at up to 3 Hz)
  • Extended range provides 2 km range with no dead zone
  • Measure IL, RL, distributed loss, distance, polarization states, phase derivative and group delay
  • High resolution C and L band (OBR 4600) or O band (OBR 4613) capability

Luna - OBR 5T-50 - Optical Backscatter Reflectometer

Industry-leading combination of measurement speed, range, accuracy and resolution
  • 12 Hz acquisition rate
  • 8.5 meter measurement range
  • 0.0034% time-of-flight delay accuracy
  • 20 micron sampling resolution
Streamlined user interface and Software Development Kit (SDK) included
  • Optimize throughput with customized interface
Automatically locates reflective events and yields RL, IL and event location

Luna - ODiSI 6000 Optical Distributed Sensor Interrogator

  • Multi-channel (or single-channel) measurements of strain-multiplex: Over 300,000 measurement locations
  • Flexible, lightweight and easy to install sensors reduce time to first measurement
  • Passive, corrosion resistant, dielectric, flexible sensors go where other sensors can’t – in bends, around corners, embedded inside materials
  • Long sensor life – no drift or recalibration required, cycle counts >107
  • Large strain range and high resolution allow for mapping of complex strain fields and large strain gradients

Luna - OVA 5000 - Optical Vector Analyzer - All-Parameter Analysis

The OVA simultaneously performs these optical component characterizations every 3 seconds:
  • Insertion Loss (IL)
  • Return Loss (RL)
  • Polarization Dependent Loss (PDL)
  • Phase Response
  • Group Delay (GD)
  • Chromatic Dispersion (CD)
  • Polarization Mode Dispersion (PMD) / Second Order PMD
  • Min/Max Loss due to Polarization
  • Impulse Response
  • Jones Matrix Elements
  • Phase Ripple – Linear and Quadratic

Luna - PHOENIX 1200 - Tunable Laser Source

  • Full C-band tunability
  • Integrated wavemeter with sub-picometer accuracy
  • Smooth, linear scans
  • Narrow linewidth, low noise
  • External triggering
  • 2 optical detectors and data acquisition channels
  • Industry leading wavelength accuracy and resolution
  • USB interface and full complement of software drivers

Luna - PHOENIX 1400 - Tunable Laser Source

  • Full C-band tunability
  • Smooth, linear scans
  • Narrow linewidth, low noise
  • Wavelength calibration in seconds
  • Integrated wavelength and power monitors
  • External triggering
  • 2 optical detectors and data acquisition channels
  • Industry leading wavelength accuracy and resolution

Luna - Saf-T-Chek Anomaly Detection System (ADS)

The Saf-T-Chek Anomaly Detection System (ADS) is designed for use by domestic or international governments and businesses for security screening of personnel. The Saf-T-Chek ADS® is primarily for detection of anomalous items in the head-region concealed by religious headgear, wigs, hats, caps or scarves. It will allow a security officer to provide targeted screening of personnel with minimal equipment footprint, exceptional ease of use, and light enough to be portable.

Luna - T-Ray® 5000 Terahertz Control Unit

The T-Ray® 5000 product family allows state of the art terahertz research to be performed quickly and easily. The modular construction and patented fiber-coupling of the T-Ray® 5000 allow experiments to be rearranged to perform a large number of experiments.

Luna - T‑Gauge® Control Unit (TCU)

  • The T‑Gauge® Control Unit (TCU) is the central component of the T‑Gauge® family of products and serves as the source of the optical and electrical signals necessary to generate and detect terahertz. The TCU also transforms analog data into a digital signal that can be analyzed using the onboard processor and interacts with the wide variety of THz accessories.
  • The TCU is a 19 inch (483 mm) rack, wall, or table mountable instrument, consisting of an ultrafast laser, high-speed optical delay, ranging optical delay, power supplies, and signal conditioning electronics, with connectors for convenient interfacing to various optical and electronic components. The high-speed delay included in the TCU can be chosen from a number of delay length and speed options. When utilized in conjunction with T-Gauge® accessories, the TCU enables the user to generate and detect pulsed terahertz energy for a wide variety of measurements.