Products

Displaying 1 - 11 of 11

Abaco CP3-GESW8-TM8 3U CPCI rear-panel I/O transition module with 8 RJ-45 ports for NETernity™ CP3-GESW8 switches

  • Supports 8-port 10/100/1000BaseT Ethernet line speed
  • 3U CompactPCI form factor with rear-panel I/O
  • Rear-panel I/O support for NETernity™ CP3-GESW8 or CP3-GESW8N
  • IEEE 802.3 compliant
  • Ethernet/LAN Resource Center

Abaco NETernity™ CP980RC 6U CompactPCI® 24-Port Unmanaged Layer 2 Gigabit Ethernet Switch

  • 6U CompactPCI form factor
  • 24-port Gigabit Ethernet switch
  • Unmanaged solution
  • L-2 switching at wire-speed
  • Supports Hot Swap
  • 24 ports routed to the rear, or 22 ports routed to the rear and 2 ports routed to the front
  • Rear I/O ports are 10BaseT, 100BaseTX, and 1000BaseT (copper media)
  • Front ports are 10BaseT, 100BaseTX, and 1000BaseT
  • Front panel status LEDs and hardware reset switch
  • Autonegotiation of speed and duplex mode (on copper ports)
  • Support for Jumbo Frames
  • RoHS 6/6 compliant
  • Polyurethane or acrylic conformal coating optional

Abaco NETernity™ GBX411 3U OpenVPX Fully Managed Layer 2/3 switch

  • 3U VPX form factor
  • VITA65 OpenVPX Compatible
  • OpenVPX profiles (see datasheet for full specs)
  • Optional configurations (see datasheet for full specs)
  • Two SFP + 10GBASE fiber ports on front panel available for air cooled models
  • Serial Console
  • OpenWare Switch Management Software
  • Wire speed Layer 2/3 switching including IPv6
  • Multicast support: IGMP Snooping Querier and MLD Snooping Querier
  • Allows up to 4096 VLANS
  • L-3 protocol support including OSPF, RIP and VRRP
  • Precision Time Protocol 1588 Transparent Clock Support
  • Air cooled and conduction cooled models

Abaco NETernity™ PMC942RC Later 2 Unamanged GigE Switch & NIC in PMC RoHS

  • Eight 10/100/1000BaseTX auto-negotiating ports, supports full or half duplex
  • Four ports accessible from front RJ45 connectors, three ports routed to P4
  • One port GigE controller appears as a Network Interface to the host
  • Onboard NIC is connected to the eighth port on the switch
  • Serial console signals routed to P4
  • Full wire speed Layer 2 switching on all ports
  • Capability to fix port Ethernet speed and duplex settings
  • 4K MAC address table
  • Auto address learning
  • Auto address aging
  • RoHS Compliant
  • Wide operating temperature option -20°C to +70°C

Abaco NETernity™ RM980RC VME 12- or 24-Port Unmanaged Layer-2 Gigabit Ethernet Switch with Rear I/O

  • 6U VME form factor
  • 12- or 24-port Gigabit Ethernet switch
  • L-2 switching at wire-speed
  • Rear ports are 10BaseT, 100BaseTX and 1000BaseT
  • 22 rear ports + 2 front ports optional
  • Auto address learning
  • Auto address aging
  • Auto MDI/MDIX support
  • 10BaseT, 100BaseTX and 1000BaseT auto-negotiating, supports full or half-duplex
  • Support for Jumbo Frames
  • Front panel Link and Activity status LEDs
  • RoHS compliant
  • Polyurethane or acrylic conformal coating optional
  • 12-, 22- or 24-port rear transition modules available

Abaco NETernity™ RM981RC VME 8, 12 or 24-Port Unmanaged Layer-2 Gigabit Ethernet Switch with Front I/O

  • 6U VME form factor
    • Single slot (12-port)
    • Dual slot (24-port)
  • 8, 12- or 24-port Gigabit Ethernet switch
  • L-2 switching at wire-speed
  • Ports can be 10/100/1000BaseT, 1000BaseLX or 1000BaseSX, or a combination of interfaces
  • Auto address learning
  • Auto address aging
  • 10/100/1000BaseT auto-negotiating, supports full or half-duplex
  • Support for Jumbo Frames
  • Front panel Link and Activity status LEDs
  • Urethane or acrylic conformal coating optional
  • Industrial temperature models available

Abaco NETernity™ RM984RC VME 8-Port Unmanaged Air and Conduction Cooled Layer-2 10/100TX Ethernet Switch

  • 6U VME form factor
  • Eight 10/100TX Ethernet switch rear I/O ports
  • L-2 switching at wire-speed
  • Rear ports are 10/100BaseTX
  • Air-cooled commercial temperature, rugged air-cooled Industrial tempterature and conduction-cooled variants
  • Auto address learning
  • Auto address aging
  • Auto MDI/MDIX support
  • 10/100BaseTX auto-negotiating, supports full or half duplex
  • Supports for Jumbo Frames
  • Front panel link and activity status LEDs
  • RoHS compliant
  • Polyurethane or acrylic conformal coating standard for rugged air-cooled and conduction cooled boards; optional for air-cooled commercial temperature
  • Serial port allows setting port speed, port duplex, port mirroring, and port disable
  • Rear transition module available
Key Specifications
  • MDI/MDIX control
  • RoHS 2002/95/EC compliant

Abaco TRCP9XX-5RC Rear Transition Module

  • Five 10/100/1000BaseT ports with RJ45 connectors
  • Two Serial ports
  • Two Ethernet ports
  • PICMG 2.16 compliant form factor
  • RoHS complaint
Suppport NETernity™ Ethernet Switches
  • CP944
  • CP946
  • CP920
  • CP921RC
  • CP980RC
  • CP982RC

Abaco TRCP9XXRC Transition Module - 24-port GbE PICMG 2.16 and RoHS compliant transition module for NETernity Ethernet Switches

  • RoHS compliant
  • 2 Ethernet ports
  • PICMG 2.16 compliant form factor
  • 2 Serial ports
  • 24 10/100/1000BaseT ports with RJ45 connectors
  • Ethernet/LAN Resource Center

Abaco TRCP9XXRC-12 Rear Transition Module - RoHS and PICMG 2.16 compliant 12-port transition module for CompactPCI (CPCI) Ethernet switches

  • Twelve 10BaseT, 100BaseTX and 1000BaseT ports with RJ45 connectors
  • One Serial Console port
  • PICMG 2.16 compliant form factor
  • RohS compliant
Supported by NETernity™ Ethernet Switches:
  • CP944
  • CP946
  • CP920
  • CP921RC
  • CP980RC
  • CP982RC

Abaco TRRM940 Transition Module for RM940 Ethernet Switches

  • 8 10/100BaseTX ports with RJ45 connectors
  • Transition module for RM940 Ethernet switches
  • Ethernet/LAN Resource Center