Products

Displaying 1 - 8 of 8

Abaco NETernity SWE540 Fully Managed 6U VPX 40/10GigE Data Plane Ethernet Switch

  • 6U VPX form factor
  • VITA 65 OpenVPX Compatible
  • OpenVPX profiles: MOD6-SWH-16U20F, MOD6-SWH- 20U19F and MOD6-SWH-16U16F
  • Four QSFP+ and two 1000BaseT ports on front panel available for aircooled models
  • 720Gbps overall bandwidth
  • Serial Console
  • OpenWare™ Switch Management Software
  • Data switching and routing at fabric speed including IPv6
  • Multicast support: IGMP Snooping Querier and MLD Snooping Querier
  • Allows up to 4,096 VLANS
  • L-3 protocol support including OSPF, RIP and VRRP
  • Precision Time Protocol 1588v2 Transparent Clock Support
  • Air-cooled and conduction-cooled
  • Rugged levels 1 through 5 available
  • Built-in Test
  • Denial-of-service attack prevention
  • Sanitization capability
  • IPMI Controller
  • Spanning Tree and Link Aggregation
  • Remote management via Telnet, SSH and SNMP
  • Support for Jumbo Frames up to 9KB
  • ECC protection management processor memory

Abaco NETernity™ SWE440 - Fully Managed 3U VPX 10/40GigE Ethernet Switch

  • 3U VPX form factor
  • VITA 65 OpenVPX compliant
  • OPenVPX profiles:
    • MOD3-SWH-6F6U-16.4.1-n
    • MOD3-SWH-8F-16.4.2-n
    • MOD3-SWH-2F4T16U-16.4.12-n
    • MOD3-SWH-32U
  • Supports connectivity and performance options for 40GBase-KX4, 10GBase‑KR, 10GBase-KX4, 10GBase-T and 1000BaseKX.
  • Two SFP+ and two 1000BaseT ports on front panel available for air-cooled models
  • Serial Console
  • OpenWare™ Switch Management Software
  • Wire speed Layer 2/3 switching including IPv6
  • Multicast support: IGMP Snooping Querier and MLD Snooping Querier
  • Allows up to 4,096 VLANS
  • L-3 protocol support including OSPF, RIP and VRRP
  • Precision Time Protocol 1588v2 Transparent Clock Support
  • Air-cooled and conduction-cooled
  • Rugged Levels 1 through 5 available
  • Built-in Test
  • Denial-of-service attack prevention
  • Sanitization capability
  • Board Management Microcontroller (BMM)
  • Spanning Tree and Link Aggregation
  • Remote management via Telnet, SSH and SNMPv3
  • Support for Jumbo Frames up to 9KB
  • Five levels of ruggedization available

Acromag EIS-408 - Industrial Ethernet Switch with 8 Web-Managed Ports and Redundancy

  • 6-Port Copper & 2-Port Fiber Web-Managed with Redundancy
  • 12 to 48V DC power supply required
  • Six copper 10Base-T / 100Base-TX, auto-MDI/MDIX and two fiber optic 100Base-FX, SC connectors

Acromag IMC-100A - 10/100BaseTX to 100BaseFX Industrial Media Converter

  • UTP to Fiber Media Converter
  • RJ45 Port Supports Auto MDI/MDI-X Function
The Antaira IMC-100A is a cost-effective solution for converting between 10/100Base-TX and 100Base-FX cabling. It allows you to extend the cabling distance of your 100Base-FX network up to 2 kilometers for multi-mode fiber or 30 kilometers for single-mode fiber.

Acromag LNX-0702G - 7-Port Gigabit Ethernet With SFP Fiber Ports

  • 5-Port 10/100/1000TX and 2-port 100/1000 Fx SFP Slots
  • Auto MDI/MDI-X Function
  • 10Gbps Back-Plane
The LNX-0702G-SFP Antaira industrial gigabit unmanaged Ethernet switch features 5-port 10/100/1000TX, and two dual rate 100/1000Fx SFP slots. This switch provides high EFT and ESD protection to protect against unregulated voltage. It also provides extended operation temperature of -40° to 75°C for an ideal solution in harsh environments and industrial applications.

Acromag LNX-800A - 8-Port Industrial Ethernet Switch

  • 8-Port 10/100BaseTX RJ45
  • Auto MDI/MDI-X Function
  • 2K MAC Address Table
The LNX-800A Antaira unmanaged industrial switch is a cost-effective solution and meets the high reliability requirements demanded by industrial applications.
The LNX-800A includes a switch controller that can automatically sense transmission speeds (10/100 Mbps). The RJ45 interface can also be auto-detected, so MDI or MDI-X is automatically selected and a crossover cable is not required. All Ethernet ports have memory buffers that support the store-and-forward mechanism. This assures that data is properly transmitted.

Acromag LNX-800AG - 8-Port Industrial Gigabit Ethernet Switch

  • 8-Port 10/100/1000TX RJ45 Fast Ethernet
  • Auto MDI/MDI-X Function
  • 8K MAC Address Table
The LNX-800AG Antaira industrial gigabit unmanaged Ethernet switch is IP30 rated and DIN-Rail mountable. It has 8 10/100/1000TX ports, making it ideal for applications that demand a high bandwidth connectivity solution.

Acromag LNX-802AG - 6-Port 10/100/1000T + 2-Port Gigabit Fiber Switch

  • 6-port 10/100/1000T + 2-port Gb Fiber
  • Auto MDI/MDI-X Function
  • 8K MAC Address Table
The LNX-802AG series Antaira industrial unmanaged Ethernet switch and is IP30 rated and DIN-Rail mountable. Each unit is designed with 6-Port 10/100/1000T plus 2 gigabit fiber Ethernet ports. The LNX-802AG fiber ports allows users to extend the connection distance to increase the network flexibility and performance.