Products

Displaying 1 - 25 of 161

Acromag 900C-SIP - Configuration Software for Windows® (XP/Vista/7) on CD-ROM

Acromag’s configuration software is the key to the I/O modules’ easy-to-use operation. The software employs the friendly Windows® interface with pull-down selection menus and fill-in-the-blank fields to speed you through a few brief configuration screens. No programming is required.

Acromag ACEX-4600 - COM Express Type 6 Carrier Cards

  • ACEX-4610: Single-width with one XMC/PMC site and two Mini PCIe sites
  • ACEX-4620: Double-width with two XMC/PMC sites and two Mini PCIe sites
Acromag’s ACEX-4600 Type 6 COM Express carrier cards employ a number of key features that are critical for successful use in the rugged environments of defense/industrial applications.

Acromag ACEX-4600-DLS - COM Express Type 6 Development Systems

EDK Peripheral Connectors
  • Power Connection (x2)
  • Video Port 1 - 3 HDMI and Display Ports
  • VGA Port
  • Audio Port
  • SATA Port (x2) For user-installed SSD/hard drive
  • 1Gb LAN Ports (x2) RJ45
  • USB 3.0 Ports (x4)
  • Serial Ports (x2) - 9-Pin, D-sub, male connector
  • PMC Rear I/O Site 1 & 2 - 68-Pin, SCSI-3
  • XMC Rear I/O Site 1 & 2 - 0.50mm High-speed Q Series, Samtec QTH Series, 20/pairs
  • PCIe x16 4-lane port
  • Fan Power (x3)
  • ACEX-4600 Carrier Connection(s)

Acromag AcPC330 - Analog Input CompactPCI Board

  • 16D/32SE input channels
  • ±5V, ±10V, 0-5V, and 0-10V input ranges
  • 16-bit A/D converter, 8µS conversion time (125KHz)
AcPC330 boards provide fast, high resolution A/D conversion. The AcPC330 has many features to improve your overall system throughput rate. You can scan all channels or define a subset for more frequent sampling. Burst mode scans selected channels at the maximum conversion rate. Uniform mode performs conversions at user-defined intervals. Both modes can scan continuously, or execute a single cycle upon receiving a trigger.

Acromag AcPC341 - Analog Input Board, Simultaneous Conversion

  • 16 differential inputs
  • ±10V DC input range
  • Eight 14-bit A/D converters with simultaneous sample and hold
  • 8µS conversion time for 8-channel bank
AcPC341 boards provide fast, high resolution, simultaneous A/D conversion of eight channels.

These boards have sixteen analog inputs which are sampled as two eight-channel banks. Eight A/D converters (ADCs) permit simultaneous conversion of all eight channels in a bank. All 16 channels share two generous 512-sample memory buffers. Conversion of each bank requires only 8µS, and all 16 channels can be sampled in just 16µs.

This board is ideal for high-speed data acquisition. A large memory buffer reduces CPU interactions for increased overall performance.

Acromag AcPC424 - Digital Input/Output Module Differential, TTL, Counter/Timer

  • 24 differential I/O, 16 TTL I/O
  • Four 16-bit counter/timer channels with six operating modes
The AcPC424 provides 24 differential input/outputs, 16 TTL input/output channels, and four 16-bit multifunction counter/timers.
The 16 TTL input/output channels can be programmed as inputs or as outputs on an individual channel basis. The 24 differential input/output channels are programmed as inputs or outputs on an 4-channel port basis. All input channels can be enabled for change of state, low, or high level transition interrupts.
This module saves money and CompactPCI slots by combining differential I/O, TTL I/O, and counter/timer functions on one card.

Acromag AcPC4610CC - Non-intelligent 3U cPCI PMC Carrier, Conduction-cooled

  • One PMC module slot
  • Front or rear access I/O
  • Plug-and-play carrier configuration and interrupt support
This board provides an easy and low cost solution that enables use of a PMC mezzanine I/O module in a standard 3U CompactPCI computer system. The carrier card acts simply as an adapter to route PCI bus signals to and from the PMC module through the CompactPCI card slot edge connector. All Acromag PMC modules and those from other vendors are supported.

Acromag AcPC4610E - Non-intelligent 3U cPCI PMC Carrier, Air-cooled

  • One PMC module slot
  • Front or rear access I/O
  • Plug-and-play carrier configuration and interrupt support
This board provides an easy and low cost solution that enables use of a PMC mezzanine I/O module in a standard 3U CompactPCI computer system. The carrier card acts simply as an adapter to route PCI bus signals to and from the PMC module through the CompactPCI card slot edge connector. All Acromag PMC modules and those from other vendors are supported.

Acromag AcPC4620CC - Non-intelligent 6U cPCI PMC Carrier, Conduction-cooled

  • Two PMC module slots
  • Front or rear access I/O
  • Plug-and-play carrier configuration and interrupt support
This board provides an easy and low cost solution that enables use of a PMC mezzanine I/O module in a standard 6U CompactPCI computer system. The carrier card acts simply as an adapter to route PCI bus signals to and from the PMC module through the CompactPCI card slot edge connector. All Acromag PMC modules and those from other vendors are supported.

Acromag AcPC4620E - Non-intelligent 6U cPCI PMC Carrier, Air-cooled

  • Two PMC module slots
  • Front or rear access I/O
  • Plug-and-play carrier configuration and interrupt support
This board provides an easy and low cost solution that enables use of a PMC mezzanine I/O module in a standard 6U CompactPCI computer system. The carrier card acts simply as an adapter to route PCI bus signals to and from the PMC module through the CompactPCI card slot edge connector. All Acromag PMC modules and those from other vendors are supported.

Acromag AcPC464 - Digital Input/Output and Counter/Timer

  • 64 digital input/output channels
  • 16-bit counter/timer channels with six operating modes
  • Change of state and level interrupts
The AcPC464 module provides 64 digital input/ output channels and four 16-bit multifunction counter/timers.
All 64 I/O channels, when set as inputs, support configuration for interrupts on either a change-of-state or on a high-to-low or low-to-high transition. A debounce timer is selectable to help filter out false transitions.
Four 16-bit multifunction counters/timers are configurable for pulse width modulated output, watchdog timer, event counter, frequency measurement, pulse width measurement, period measurement, or one shot pulse output. The four 16-bit counters can also be configured into two 32-bit counter/timers.
This module saves money and CompactPCI slots by combining digital I/O and counter/timer functions on a single card.

Acromag AcPC482 - Counter/Timer with Quadrature

  • Ten 16-bit counter/timers, TTL
  • Event counter
  • Frequency measurement
  • Quadrature position measurement
  • Pulse-width or periodic rate monitor
  • Watchdog timer with isolated relay output

Acromag AcPC483 - Counter/Timer with Quadrature

  • Four 16-bit counters - TTL, and four 32-bit counters - RS422
  • Event counter
  • Frequency measurement
  • Quadrature position measurement
  • Pulse-width or periodic rate monitor
  • Watchdog timer with isolated relay output
Several models with a variety of configurations provide up to ten counter/timer channels for counting events, generating waveform control signals, measuring pulse-widths, periodic rates, or quadrature position and monitoring operations.
Support for internal or external triggering simplifies the synchronization of operations to specific events. Counter functions can use internally generated clocks or an externally supplied clock.
  • Most configuration is handled by a single register which minimizes programming.
  • Pullups are socketed for easy adjustment.

Acromag AcPC484 - Counter/Timer with Quadrature

  • Six 32-bit counters - RS422
  • Event counter
  • Frequency measurement
  • Quadrature position measurement
  • Pulse-width or periodic rate monitor
  • Watchdog timer with isolated relay output

Acromag AcPC730 - Multifunction 3U cPCI Board

  • 16D/32SE analog inputs, 16-bit A/D
  • Eight analog outputs, 16-bit D/A
  • 16 TTL digital I/O
  • One 32-bit counter/timer
AcPC730 I/O boards provide a variety of I/O functions on a single card. These high-density boards perform both high-speed and high-resolution A/D and D/A conversion and also handle digital I/O plus counter/timer functions.

Acromag AcPC8625A - Nonintelligent 6U cPCI IP Carrier

  • Four IP module slots
  • Rear access I/O
  • Plug-and-play carrier configuration and interrupt support
The AcPC8625A is a nonintelligent slave board that interfaces four IP modules to the CompactPCI (cPCI) bus. All 200 I/O points are brought out the rear J4 and J5 connectors. This convenience eliminates messy cables from hanging out the front of the cage. In addition to a more efficient cage wiring design, it is also much easier to insert and replace boards. And with Acromag’s 80mm transition module (TRANS-C200), all 200 I/O points are easily ported out the back of the cage.

Acromag AcPC8630A - Nonintelligent 3U cPCI IP Carrier, Front I/O

  • Two IP module slots
  • Front access I/O
  • Plug-and-play carrier configuration and interrupt support
The AcPC8630A is a nonintelligent slave board that interfaces two IP modules to the CompactPCI® (cPCI) bus. All 100 I/O points are brought out the front connectors for easy cable access.

Acromag AcPC8635A - Nonintelligent 3U cPCI IP Carrier, Rear I/O

  • Two IP module slots
  • Rear access I/O
  • Plug-and-play carrier configuration and interrupt support
The AcPC8635A is a non-intelligent slave board that interfaces two IP modules to the CompactPCI® (cPCI) bus. All 100 I/O points are brought out the rear J2 connector. This convenience eliminates messy cables from hanging out the front of the cage. In addition to a more efficient cage wiring design, it is also much easier to insert and replace boards.

Acromag Adapters/Converters - USB-to-Serial

This device is a USB-to-serial adapter that you can use to communicate with many Acromag I/O products for setup and re-configuration for your application.

Acromag Agility™ Config Tool

The Agility™ Config Tool is a mobile application that allows easy setup and configuration of the Acromag TT Series transmitters (via a tethered mobile device), Acromag SP230 Series Signal Splitters (via a tethered mobile device), Acromag microBlox® Series I/O Modules (via wireless connection) and Acromag microBlox Series Limit Alarms (via wireless connection). TT Series and SP230 Series require one 4001-113 cable for configuration with Windows® when not using a USB Isolator.
TT Series and SP230 Series require one 5028-565 OTG cable and one 4001-113 cable when using the Agility™ app with an Android® device.
Demo the software, no need for a module. To enter demo mode simple tap the arrow icon in the upper left corner 8 times.

Acromag AMRN / AMRX - Software Support

  • Any container application that can embed ActiveX controls can use the AMXX software packages
  • At design time, you can access your Modbus device from the software’s test property page
  • Property page device access makes start-up and troubleshooting a snap – all without writing a single line of code
  • Talking to a Modbus slave is as simple as calling a function with the necessary arguments
  • The software automatically builds the command, appends a CRC, sends the request over the network, and validates the response
  • Your program just reads and writes simple 16-bit data values
  • ActiveX controls include a help file and examples for Excel, Visual Basic, C++
  • .NET controls include a help file and examples for Visual Basic, C#, and Managed C++

Acromag AMTN / AMTX - Software Support

  • Any container application that can embed ActiveX controls can use the AMXX software packages
  • At design time, you can access your Modbus device from the software’s test property page
  • Property page device access makes start-up and troubleshooting a snap – all without writing a single line of code
  • Talking to a Modbus slave is as simple as calling a function with the necessary arguments
  • The software automatically builds the command, appends a CRC, sends the request over the network, and validates the response
  • Your program just reads and writes simple 16-bit data values
  • ActiveX controls include a help file and examples for Excel, Visual Basic, C++
  • .NET controls include a help file and examples for Visual Basic, C#, and Managed C++

Acromag AP225 - 12-bit DAC Module

  • 16 channels voltage outputs
  • Wide temperature range
  • PCIe bus interface
The AP225 outputs analog voltage signals to drive up to 16 devices. When used with a carrier that holds two AcroPack AP modules, up to 32 voltage outputs can be obtained from a single card cage slot. The AP225 is ideal for waveform generation application that require high speed capabilities.

Acromag AP235 - 16-bit DAC Voltage Waveform Output

  • 16 Channels Voltage Output
  • 16-bit DAC
  • PCIe bus interface
The AP235 outputs analog voltage signals to drive up to 16 devices. When used with a carrier that holds two AcroPack AP modules, up to 32 voltage outputs can be obtained from a single card cage slot. The AP235 is ideal for waveform generation application that require high speed capabilities.

Acromag AP471 - TTL Level Digital I/O

  • TTL-compatible inputs
  • 48 bidirectional input/output channels
  • 0 to 5V DC
  • Wide Temperature Range
  • PCIe Bus Interface
The AP471 AcroPack I/O (AP) modules provide 48 general-purpose, bidirectional I/O points to economically monitor and control a large quantity of digital devices. Each channel has interrupt capability for detecting low-to-high or high-to-low transitions. Change- of-state interrupts are supported using paired channels. Debounce eliminates interrupts from noise and switching transients for error-free edge detection.

Pages