Products

Displaying 1 - 19 of 19

Abaco 800 VME64 to VME64 bus-to-bus adapter with DMA

  • Bi-directional bus mastership
  • Memory and I/O mapping
  • Streamlined no-protocol connectivity
  • Controller Mode DMA: 70 MB/s

Abaco 810 VME64 to PCI bus-to-bus adapter with DMA

  • Memory and I/O mapping
  • Controller Mode DMA: 70 MB/s
  • Streamlined no-protocol connectivity
  • Bi-directional bus mastership

Abaco 820 VME64 to PMC bus-to-bus adapter with DMA

  • Streamlined no-protocol connectivity
  • Bi-directional bus mastership
  • Memory and I/O mapping
  • Controller Mode DMA: 70 MB/s

Abaco CPCI-100A-BP 2-slot IndustryPack carrier for 3U CompactPCI

  • Rear I/O
  • 8 MHz IndustryPack clock for each slot
  • Two IndustryPack slots on a 3U CPCI card

Abaco CPMC1 Carrier Card - PMC carrier card for 3U CompactPCI

  • 3U CompactPCI carrier for one PMC module
  • 64 bit/66 MHz & 32-/64-bit /33MHz PCI bus
  • Rear and front panel I/O (depending on style)
  • Air- and conduction-cooled (depending on style)
  • Extended temperature -40o to +85oC
  • Optional conformal coating
  • Ultra compact. 1 slot only
  • High shock and vibration immunity (depending on style)
  • One PMC site
  • Front & rear I/O
  • 3U CPCI carrier board, optional conduction cooled
  • 64-bit, 66 MHz, up to 512 MB/s operation

Abaco EXP237 XMC Expansion Card for VME Systems

  • Provides three additional XMC/PMC expansion sites via PCI Express (PCIe) to the Host Processor through on-board connector
  • VITA 42.3 compliant
  • Expansion sites configured as:
    • Three 3.3V/5.0V PMC sites
    • Three XMC sites

Abaco IMPCC1 3U CPCI single PMC carrier card for use with IMP1A

  • 3.3V/5V PMC signaling
  • 5 air- and conduction-cooled ruggedization levels
  • For use in 3.3V CompactPCI backplane
  • Single PMC site
  • 3U CompactPCI form factor
  • 32-bit/33MHz PCI interface
  • Front and rear I/O versions available
  • For Ruggedization Levels, please see the configuration guide under the downloads tab

Abaco PCI-40B 4-Slot IndustryPack® Carrier for PCI

  • Software compatible with the PCI-40A
  • Switchable 8/32 MHz IP bus
  • I/O via four 50-pin keyed, shrouded ribbon cable headers
  • 4 IP slots on a full-length universal PCI card

Abaco PEX430 PCI Express Switch and PMC/XMC Carrier Card for VPX systems

  • Air-cooled and rugged conduction-cooled versions
  • Supports PMC or XMC modules
  • Non-transparent mode for multiple hosts
  • Four 4-lane PCI Express non-blocking switch
  • One PMC or XMC site
  • For Ruggedization Levels, please see the configuration guide under the downloads tab

Abaco PEX431 Multi-Fabric Switch and XMC Carrier Card for VPX systems

PCIe Features 
  • Up to six x4 PCIe Gen 2.0 ports via non-blocking switch
  • Non-transparent bridging mode for multi-host systems
Ethernet Features
  • Up to nine ports Gigabit Ethernet Switch, unmanaged (not available with XMC option)
Build Options Include: 
  • Up to 8x 1000BASE-BX with 1x 1000BASE-T
  • Up to 6x 1000BASE-BX with 2x 1000BASE-T
Mezzanine Features
  • Supports XMC Modules (not available with Ethernet switching option)
  • Mezzanine I/O routed to VPX backplane
  • XMC I/O via PG16x24s+8dx12d
  • PMC I/O via PG14x64s

Abaco PMC239/F PCI to PMC Adapter

  • 32 and 64-bit PCI
  • Generates the +3.3V power for the PMC
  • Supports both 5V and 3.3V signaling
  • PCI edge connector style card to PMC (IEEE 1386) Adapter
  • 1 MagLev type fan (5V, 1W)

Abaco SPR418A PMC/XMC hybrid carrier for PCI Express slots

  • Adapts one PMC or XMC card to x8 PCI Express
  • Supports Gen2 PCI Express
  • PMC site supports PCI-X 133 MHz
  • Optional connectors provide J4 and J16 connectivity as well as standalone operation
  • Integrated fan
  • Delivers up to 25W to mezzanine site

Abaco VIPC626-ET 6U VME carrier with 4 IP slots; ext. temperature VIPC626-ET

  • Extended temperature range (-40º to +85º degrees C)
  • Self Healing fuses and RF-filtering on all IP power lines
  • 4 IndustryPack slots
  • 6U VMEbus board

Abaco VIPC627-ET 4 slot IP 6U VME carrier with extended temperature

  • Front and rear I/O
  • 4 IP slots
  • 6U VME form factor, single slot
  • Extended operating temperature range: -40º to +85ºC

Abaco VIPC628-ET 6U VME carrier card with 4 IP slots, ext. temp.

  • Extended temperature range (-40 to +85 C)
  • Self Healing fuses and RF-filtering on all IP power lines
  • 4 IndustryPack slots
  • 6U VME single slot card

Abaco VIPC664-ET 4 slot IP carrier designed for VME64x chassis

  • Extended temperature operation: -40º to +85º C
  • 6U VME with rear I/O
  • 4 IP sites
  • Programmable Interrupts

Abaco XM-664-60 Transition module; rear panel I/O to VIPC664

  • IndustryPack I/O Lines: 200
  • Rear Panel: 6U mounting
  • Form Factor: Non-standard
  • Connectors: 50-pin vertical

Acromag VPX4812 / VPX4814 - Non-intelligent 3U OpenVPX™ Carrier with P16 Support Switch

  • PCIe bus 8-lane Gen 1 or 2 interface
  • Supports standard XMC modules (IEEE 1386.1)
  • Conforms to VPX VITA 46.0, 46.4, and 46.9 specifications and optionally VITA 48
  • Supports front or rear panel XMC I/O
  • Rear I/O is compliant to VITA 46.9 X24s+X8d+X12d
  • +12V and –12V provided to XMC site
  • Monitors FRU information and module temperature

Acromag VPX4821A - Non-intelligent 6U OpenVPX™ Carrier

  • Connects to OpenVPX™ via Data plane
  • Support for upstream/downstream
  • Optional backplane configuration for one 16-lane port, two 8-lane ports, or four 4-lane ports
  • Supports dual standard (IEEE 1386.1) PMC/XMC modules with 25W mezzanine sites
  • PMC site uses 32/64-bit, 33/66/133MHz PLX technology with a PCIe to PCI-X bridge
  • Supports 64-bits of PMC I/O including differential routing to backplace per pattern “P64s” of VITA 46.9
  • 5V tolerant with respect to PMC connectors
  • XMC site uses PCIe x8 Gen 1 or 2 interface
  • Supports 40-bits (20 pairs) of XMC I/O to backplane per pattern “X12d+X8d” of VITA 46.9
  • Conforms to VITA 46.0, 46.4, 46.9
  • Supports front or rear panel PMC/XMC I/O
  • ±12V AUX power to PMC/XMC site
  • Monitors FRU information and module temperature