Products

Displaying 1 - 23 of 23

Acromag AcPC4610CC - Non-intelligent 3U cPCI PMC Carrier, Conduction-cooled

  • One PMC module slot
  • Front or rear access I/O
  • Plug-and-play carrier configuration and interrupt support
This board provides an easy and low cost solution that enables use of a PMC mezzanine I/O module in a standard 3U CompactPCI computer system. The carrier card acts simply as an adapter to route PCI bus signals to and from the PMC module through the CompactPCI card slot edge connector. All Acromag PMC modules and those from other vendors are supported.

Acromag AcPC4610E - Non-intelligent 3U cPCI PMC Carrier, Air-cooled

  • One PMC module slot
  • Front or rear access I/O
  • Plug-and-play carrier configuration and interrupt support
This board provides an easy and low cost solution that enables use of a PMC mezzanine I/O module in a standard 3U CompactPCI computer system. The carrier card acts simply as an adapter to route PCI bus signals to and from the PMC module through the CompactPCI card slot edge connector. All Acromag PMC modules and those from other vendors are supported.

Acromag AcPC4620CC - Non-intelligent 6U cPCI PMC Carrier, Conduction-cooled

  • Two PMC module slots
  • Front or rear access I/O
  • Plug-and-play carrier configuration and interrupt support
This board provides an easy and low cost solution that enables use of a PMC mezzanine I/O module in a standard 6U CompactPCI computer system. The carrier card acts simply as an adapter to route PCI bus signals to and from the PMC module through the CompactPCI card slot edge connector. All Acromag PMC modules and those from other vendors are supported.

Acromag AcPC4620E - Non-intelligent 6U cPCI PMC Carrier, Air-cooled

  • Two PMC module slots
  • Front or rear access I/O
  • Plug-and-play carrier configuration and interrupt support
This board provides an easy and low cost solution that enables use of a PMC mezzanine I/O module in a standard 6U CompactPCI computer system. The carrier card acts simply as an adapter to route PCI bus signals to and from the PMC module through the CompactPCI card slot edge connector. All Acromag PMC modules and those from other vendors are supported.

Acromag APC-PMC - Non-intelligent PMC Carrier Card

  • Half-length PCI card
  • Holds one PMC card
  • 32-bit 66 MHz PCI interface
This board provides an easy and low cost solution that enables use of a PMC mezzanine I/O module in a standard PCI computer system. The carrier card acts simply as an adapter to route PCI bus signals to and from the PMC module through the PCI card slot edge connector. All Acromag PMC modules and those from other vendors are supported.

Acromag APCe8670 - Non-intelligent carrier card

  • 4-lane PCI Express interface
  • Holds one PMC module
Acromag’s APCe8670 carrier card interfaces a PMC mezzanine module to a PCI Express bus in a PC-based desktop computer system.
The APCe8670 is a PCIe bus adapter board that allows a PC (PCIe bus master) to control and communicate with the hosted PMC module. It simply acts as an adapter to route signals between the system’s PCIe bus and the PMC module connectors.

Acromag AXM-A30 - Analog Input Extension I/O Module for PMC FPGA

This module features two 105MHz 16-bit A/D channels. An external clock and trigger can be used to control sampling.
An internal precision clock conditioner provides the functions of jitter cleaning/reconditioning, multiplication, and distribution of a reference clock.

Acromag AXM-A75 - Multi-function I/O for PMC & XMC FPGA

  • 16 channels of analog input capable of simultaneous sampling
  • 16-bit 250kHz A/D converter on each channel
  • Analog input range of ±10.24 volts
  • Programmable gain of 1x, 2x, 4x, or 8x
  • 8 channels of analog output capable of simultaneous updates
  • Each A/D channel includes a 2K sample FIFO
  • FIFO status interrupts configurable for half-full or overflow conditions
  • Dual quad 16-bit serial input D/A converters with 10μS settling time
  • Analog output range of ±10 volts
  • 16 channels of general-purpose digital I/O
  • Front panel 68-pin VHDCI receptacle for field I/O connections
  • Example VHDL code provided in the base board’s Engineering Design Kit to control sample rate and gain selection
  • Operating temperature: -40 to 85°C

Acromag PCISW-API-WIN - PCI Driver Software for Windows® Operating Systems

  • Support for Acromag XMC, PMC, PCI, CompactPCI cards
Application Programming Interface (API)
Acromag’s software development tools greatly simplify the interface between the I/O boards and your Windows-based application program. This package provides DLL driver level support for Acromag’s complete line of PMC, XMC, PCI and cPCI products. In addition, “C” source demonstration programs provide easy-to-use tools to test the operation of the module.

Acromag PCISW-LINUX - Linux Libraries (download only)

  • Application programming interface with function routines
  • For XMC, CompactPCI, PCI, and PMC
  • Includes C source code
  • Download at no charge
Application Programming Interface (API) Acromag's software development tools greatly simplify the interface between the I/O boards and your software application program. The Linux libraries are supplied as “C”source code. These libraries provide easy-to-use function routines that quickly integrate with your application. Function routines are ready for use “as-is,” but they are also easily customized for your unique application.

Acromag PMC-LX - Reconfigurable Virtex-4 FPGA with plug-in I/O

  • LVDS I/O and Plug-In I/O Modules
  • XC4VLX40/60 FPGA with up to 60K logic cells and 64 XtremeDSP slices
Acromag's PMC-LX boards use a high-performance Xilinx® Virtex-4TM FPGA, but maintain a relatively low price point. They are optimized for high-performance logic, featuring a high logic-to-feature ratio and a high I/O-to-feature ratio. Two modules let you select a FPGA to match your logic requirements.
Although there is no limit to the uses for Acromag's FPGA boards, several applications are ideal for this new technology. Typical uses include hardware simulation, communication processing, in-circuit diagnostics, military servers, and telecommunication.
I/O processing is handled on a separate mezzanine card that plugs into the FPGA base board. A variety of these external I/O cards offer an interface for your analog and digital I/O signals. See the AXM I/O Card for more details. Additionally, 64 I/O lines are supported via the rear (J4) connector.

Acromag PMC-SLX - User-Configurable Spartan-6 FPGA Modules with Plug-In I/O

  • PMC-SLX150: 147,433 logic cells (XC6SLX150)
Acromag’s cost-effective PMC-SLX modules feature a user-configurable Xilinx® Spartan®-6 FPGA enhanced with high-speed memory and a high-throughput PCI-X interface. Field I/O interfaces to the PMC FPGA via the rear J4/P4 connector and/or with optional front mezzanine AXM plug-in I/O modules. The result is a powerful and flexible I/O processor module that is capable of executing custom instruction sets and algorithms.
The logic-optimized PMC FPGA is well-suited for a broad range of applications. Typical uses include hardware simulation, communications, in-circuit diagnostics, military servers, signal intelligence, and image processing.

Acromag PMC-SX35 - Reconfigurable Virtex-4 FPGA with plug-in I/O

  • 64 LVDS I/O and plug-In I/O modules
  • XC4VSX35 FPGA with up to 34K logic cells and 192 XtremeDSP slices
Acromag’s PMC-SX boards use a high-performance Xilinx® Virtex-4™ FPGA, but maintain a relatively low price point. They are optimized for high-performance digital signal processing to help you build custom pre/post/co-processing hardware or high-performance filters. You can create more than 40 different functions (MACs, multipliers, adders, and muxes).

Acromag PMC-VFX - Reconfigurable Virtex-5 FPGA with plug-in I/O

  • LVDS and Plug-In I/O Modules
  • XC5VFX70T FPGA: 71K logic cells and PowerPC 440 32-bit RISC core
Acromag’s PMC-VFX boards feature a reconfigurable Xilinx® Virtex™-5 FPGA enhanced with multiple high-speed memory buffers and a high-throughput PCI-X interface. Field I/O interfaces to the FPGA via the rear J4/P4 connector and/or with optional front mezzanine plug-in I/O modules. The result is a powerful and flexible I/O processor module that is capable of executing your custom instruction sets and algorithms.

Acromag PMC-VLX - Reconfigurable Virtex-5 FPGA with plug-in I/O

  • 64 LVDS I/O and plug-In I/O modules
  • XC5VLX85T/110T/155T FPGA, up to 155K logic cells, 128 DSP48E slices
Acromag’s PMC-VLX boards feature a reconfigurable Xilinx® Virtex™-5 FPGA enhanced with multiple high-speed memory buffers and a high-throughput PCI-X interface. Field I/O interfaces to the FPGA via the rear J4/P4 connector and/or with optional front mezzanine plug-in I/O modules. The result is a powerful and flexible I/O processor module that is capable of executing your custom instruction sets and algorithms.
Three models provide a choice of logic-optimized FPGAs to match your performance requirements. Although there is no limit to the uses for these boards, several applications are ideal. Typical uses include hardware simulation, communications, military servers, in-circuit diagnostics, signal intelligence, and image processing.

Acromag PMC-VSX - Reconfigurable Virtex-5 FPGA with plug-in I/O

  • LVDS I/O and plug-In I/O modules
  • XC5VSX95T FPGA with 94K logic cells and 640 DSP48E slices
Acromag’s PMC-VSX boards feature a reconfigurable Xilinx® Virtex™-5 FPGA enhanced with multiple high-speed memory buffers and a high-throughput PCI-X interface. Field I/O interfaces to the FPGA via the rear J4/P4 connector and/or with optional front mezzanine plug-in I/O modules. The result is a powerful and flexible I/O processor module that is capable of executing your custom instruction sets and algorithms.

Acromag PMCSW-API-VXW - VxWorks Libraries Software Support

  • VxWorks function libraries for XMC, PMC, PCI and CompactPCI products (except IP carriers)
  • Supports any CPU target with quick modification.
  • API easily convertible for any operating system
Application Programming Interface (API)
Acromag's software development tools greatly simplify the interface between the I/O boards and your application program. Libraries provide easy-to-use C function routines that quickly integrate with your application. The C functions are ready for use “as-is,” but they are also easily customized for your unique application.

Acromag Termination Panels

Screw terminal panels simplify field signal wiring. A cable connector provides a clean interface to the I/O board or module.
Many termination panels have a compact footprint and mount neatly on a DIN rail strip. Other panels are designed for mounting directly onto a standard 19-inch computer rack.

Acromag Transition Modules

These adapters repeat field I/O connections on Acromag’s carrier cards for front or rear exit from the card cage.
Transition modules provide a solution for controlling the location of your cabling within the card cage.

Acromag VPX4810 Non-intelligent 3U OpenVPX™ Carrier

  • Holds one PMC/XMC module
  • PMC rear I/O
  • PCIe bus 8-lane Gen 1 or 2 interface backplane connection
  • Air-cooled, conduction-cooled, REDI versions
These 3U mezzanine carrier cards provide a simple and cost-effective solution for interfacing a PMC or XMC module to a VPX computer system. The carrier card routes power and bus signals to a plug-in mezzanine module through the VPX card slot connector. Industrial I/O and configurable FPGA modules from Acromag or other vendors are supported.

New Wave DV - V1141 Quad Channel PMC/XMC Networking Card

  • Four SFP+ optical ports capable of Ethernet or Fibre Channel up to 5 Gb/s
  • Built-in UDP offload engine for real-time communication
  • Supports PCI Express, PCI, and XAUI host interfaces
  • Available with streaming front-end FPGA core for quick sensor integration
  • Available with advanced APIs that support multi-core and multi-processor architectures
  • Thermal sensors for monitoring card temperature
  • Available in air and conduction-cooled XMC form factor
  • Provides high-bandwidth secure Ethernet and Fibre Channel communications
  • Supports real-time data streaming directly from sensors
  • Adapts with evolving application requirements providing a technology contingency plan
  • A COTS solution reduces system size, power footprint, and cost

New Wave DV - V1142 4-Port 1394b AS5643 PMC/XMC Card

  • Four transformer coupled ports, ports are configurable to up to 4 different 1394 nodes
  • Microsemi SmartFusion2 M2S150 FPGA
  • Supports a PCIe Gen2 x 4 host interface
  • PPS time synchronization with μSec resolution
  • Thermal sensors for monitoring card temperature
  • Robust FPGA development framework
  • Available in air and conduction-cooled XMC form factors
  • FPGA based XMC card for SAE-AS5643 aerospace applications
  • Supports transformer coupled S100/S200/S400 data rates
  • A COTS solution optimized for SWaP (size, weight and power)
  • A programmable FPGA with a powerful development framework
  • Integrated system-on-chip features for small form factor applications

New Wave DV - V1144 12-Port 1394b AS5643 PMC/XMC Card

  • Twelve transformer coupled ports, ports are configurable to up to nine different 1394 nodes
  • Microsemi SmartFusion2 M2S150 FPGA
  • Supports a PCIe Gen2 x 4 host interface
  • PPS time synchronization with μSec resolution
  • Thermal sensors for monitoring card temperature
  • Robust FPGA development framework
  • Available in air and conduction-cooled PMC/XMC form factors
  • FPGA-based PMC/XMC card for SAE-AS5643 aerospace applications
  • Supports transformer coupled S100/S200/S400 data rates
  • A COTS solution optimized for SWaP (size, weight and power)
  • A programmable FPGA with a powerful development framework
  • Integrated system-on-chip features for small form factor applications