Products

Displaying 1 - 11 of 11

Acromag IP500A - Serial Communication, 232 Industry Pack Module

  • Four asynchronous EIA/TIA-232E serial ports
  • 16-byte FIFO buffers
  • Interrupt support
  • Programmable baud rate (up to 128Kbps)
These modules provide asynchronous serial and parallel communication interfaces for your system. Software-configuration helps you quickly set baud rates, character-sizes, stop bits, and parity. Full signal support for modem control is also included.
For more efficient data processing, each serial port is equipped with 16-character FIFO buffers on the transmit and receive lines.
The data ports generate individually controlled transmit, receive, line status, and data set interrupts. Since unique interrupt vectors may be assigned to each port, it is easy for you to identify and locate the interrupt source. Also, a priority shifting scheme prevents continuous interrupts from one port from blocking interrupts from another.

Acromag IP501 Serial Communication, 422/485 Full Duplex Industry Pack Module

  • Four asynchronous EIA/TIA-422B (EIA-485) serial ports
  • FIFO buffers (16, 64, or 128-byte)
  • Interrupt support
  • Programmable baud rate (up to 512Kbps)
These modules provide an asynchronous serial communication interface for your system. They have four asynchronous, full-duplex EIA/TIA-422B serial ports. Since the transceivers are compatible with the EIA-485 standard, you can also use a full-duplex RS-485 interface for multiple driver support. However, for true half-duplex EIA-485 operation, use the IP502.

Acromag IP502 - Serial Communication, 485 Half-Duplex Industry Pack Modules

  • Four asynchronous EIA-485 serial ports
  • 16-byte FIFO buffers
  • Interrupt support
  • Programmable baud rate (up to 512Kbps)
These modules provide an asynchronous serial communication interface for your system. The IP502 has four asynchronous, half-duplex EIA-485 serial ports. It provides a cost-efficient interface to EIA-485 multi-driver networks which support up to 32 nodes. However, for full handshaking support, use the full-duplex IP501.

Acromag IP511 Serial Communication, 422 Isolated Industry Pack Module

  • Four asynchronous EIA/TIA-422B isolated serial ports
  • 16 or 64-byte FIFO buffers
  • Interrupt support
  • Programmable baud rate (up to 512Kbps)
IP511 Industrial I/O Pack (IP) modules provide an isolated, asynchronous serial communication interface for your computer.

Acromag IP512 Serial Communication, 485 Isolated Industry Pack Module

  • Four asynchronous EIA-485 isolated serial ports
  • 16 or 64-byte FIFO buffers
  • Interrupt support
  • Programmable baud rate (up to 512Kbps)
IP512 Industrial I/O Pack (IP) modules provide an isolated, high-performance serial communication interface for your computer.

Acromag IP520 Serial Communication, 232 Octal Industry Pack Module

  • Eight asynchronous EIA/TIA-232E serial ports
  • 64-byte FIFO buffers
  • Interrupt support
  • Programmable baud rate (up to 230Kbps)
These modules provide eight asynchronous serial communication ports from a single IP carrier slot. Software-configuration helps you quickly set baud rates, character-sizes, stop bits, and parity. Signal support for RTS/CTS handshaking is also included.

Acromag IP521 Serial Communication, 422/485 Octal Industry Pack Module

  • Eight asynchronous full duplex EIA/TIA-422B serial ports (supports EIA-485)
  • 64-byte FIFO buffers
  • Interrupt support
  • Programmable baud rate (up to 921.6bps)
These modules provide eight asynchronous serial communication ports from a single IP carrier slot. Software-configuration helps you quickly set baud rates, character-sizes, stop bits, and parity.

Acromag IP560 CAN Bus Interface Industry Pack Modules

  • Two CAN bus channels with optional isolation
  • NXP SJA1000 CAN controller with TJA1043 transceiver

IP560 modules provide two independent CAN bus interface channels. Each channel has a NXP SJA1000 CAN controller with a TJA1043 transceiver. The advantage of this design is that it allows reporting of bus fault conditions directly from the TJA1043 transceivers. It also has the ability to transmit, receive and perform message filtering on extended and standard messages.

Acromag IP570 MIL-STD-1553 Bus Interface Modules

  • One or two 1553 interface channels
  • DDC Micro-ACE controls 1553 interface
IP570 modules offer a choice of one or two channels to interface sensors and other devices to a 1553 bus.
MIL-STD-1553 (1553) is a digital internal time division command/response multiplex data bus. It is a military standard which has become one of the basic tools used by the U.S. Department of Defense for integration of weapon systems. MIL-STD-1553 describes the method of communication and the electrical interface requirements for subsystems connected to the data bus. Since its introduction, MIL-STD-1553 applications have extended to systems integration of flight controls, propulsion controls, and vehicle management (electrical, hydraulic, environmental control, etc.)

Acromag PMC520 Serial Communication, 232 Octal

  • 8 asynchronous EIA/TIA-232E serial ports
  • 64-byte FIFO buffers
  • Interrupt support
  • Programmable baud rate (up to 120Kbps)
These modules provide eight asynchronous serial communication ports from a single PMC Socket. Software-configuration helps you quickly set baud rates, character-sizes, stop bits, and parity. Signal support for RTS/CTS handshaking is also included.

Acromag PMC521 Serial Communication, 422/485 Octal

  • 8 asynchronous full duplex EIA/TIA-422B serial ports (supports EIA-485)
  • 64-byte FIFO buffers
  • Interrupt support
  • Programmable baud rate (up to 1.8432Mbps)