Products

Displaying 1 - 18 of 18

Abaco FC6301 FPGA Card - 3U CompactPCI with Virtex-6 FPGA

  • Virtex-6 LX240T, LX365T, LX550T, SX315T, SX315T, SX475T
  • High density Memory Options using BLAST sites: DDR2 and DDR3 SDRAM, QDR2 SRAM, NAND FLASH
  • Onboard user defined 128Mbit Flash ROM
  • PCI 32-bit, 33/66MHz
  • Front Panel FMC Mezzanine Cards
  • UART over USB
  • Gigabit Ethernet x2 (optional)

Abaco FlexVPX Backplane - Configurable 3U VPX backplanes

FlexVPX provides system designers with the flexibility and performance required for the most demanding applications. The ability to interconnect 2 and 3-slot 3U VPX compliant backplanes allows for custom system configurations using COTS hardware. Backplanes are equipped with PCI Express bridges that ensure fast and high-throughput for point-to-point communication between different elements in the system. FlexVPX relies on OpenVPX (VITA 65) which enables the interoperability of products from different vendors. With the option to build multi-slot solutions, users have the opportunity to design a range of systems that feature a small footprint, a high level of ruggedization, and unmatched performance.

Abaco FM780 XMC FPGA Card - Featuring a Xilinx Virtex-7 FPGA

  • Virtex-7 XC7VX485T, XC7VX980T, XC7VX690T, XC7VX1140T
  • Gen 1, 2 and 3 PCIe controller, 4 and 8-lane
  • 2GB DDR3 SDRAM
  • High density Memory Options using BLAST sites: additional DDR3 SDRAM, QDR2+ SRAM, NAND FLASH.
  • 1Gbit FPGA configuration on board Flash
  • 128Mbit user defined Flash ROM
  • VITA 42 and VITA 20 compliant
  • Front Panel I/O Daughter Cards for A/D, D/A, Video, digital and optical communication
  • Abaco Systems FMC products optionally supported on side 2
  • Consult Ordering Information for all options
  • Conduction Cooled

Abaco FMC122 FPGA Mezzanine Card - Multi-mode analog input

  • Dual - Single 8-Bit Channel Operation
    • 2-Channel 1.25 Gsps A/D conversion Mode
    • 1-Channel 2.50 Gsps A/D conversion Mode
  • VITA 57.1-2010 compliant
  • 1.5V to 3.3V VADJ operation
  • Conduction Cooled
  • 1.25Gsps or 625Msps DDR LVDS outputs
  • Coax front panel inputs on SSMC connectors
  • Single ended AC-coupled analog inputs
  • Flexible clock tree enables: - internal clock - external clock - cascading multiple boards (optional)
    • LPC (low-pin count) compatible
    • Mil-I-46058c Conformal Coating Compliant (optional) X

Abaco FMC134 FPGA Mezzanine Card - Direct RF conversion module

  • Two operational modes
    • 4 channels, 12-bit, 3.2GSPS data rate
    • 2 channels, 12-bit, 6.4GSPS data rate
  • VITA 57.4 HSPC FMC+ site required
  • 16 JESD204B lanes at 12.8GBPS
  • 8 JESD204B lanes passed to board topside for FMC stacking
  • Optional FMC+e connection for additional stacked serial lanes
  • Conduction cooled configuration available
  • AC-coupled analog input
  • 9 front panel SSMC or MMCX connectors
  • Internal or external clock
  • MIL-I-46058c conformal coating (optional)
  • 2Kbit EEPROM (M24C02-WDW) accessible from the host via I2C bus
  • Full-featured board support package.
    • Open source VHDL reference design
    • Open source C/C++ reference examples. Windows® and Linux® support.
    • JESD204B core included
    • Simplified IP integration with StellarIP

Abaco FPGA DSP Board Support Package

Our Board Support Package helps customers get their hardware implementation underway as quickly as possible by providing reference designs, the Stellar IP FPGA development tool, and the 4FM GUI user interface for controlling and monitoring the hardware, as well as other supporting elements. The package comes with three main components: host tools, FPGA tools and diagnostic tools.

Abaco PC720 FPGA Card - PCIe with Virtex-7

  • Kintex-7 160T, 325T, 410T
  • PCIe Gen2 x8/4-lane, PCIe Gen3 x4 (softcore)
  • 1GB DDR3 SDRAM
  • 1x FMC HPC available on front panel (VITA 57.1)
  • 1x FMC LPC or 4-channel SFP FMC (FMC404) available on front panel on the secondary side (VITA 57.1)
  • Micro SD Flash (32GB)

Abaco PC820 FPGA Card - PCIe with Kintex or Virtex Ultrascale FPGA

  • Virtex UltraScale (XCVU080, XCVU095, XCVU125) or Kintex UltraScale (XCKU085, XCKU095, XCKU115)
  • PCIe Gen3 x8
  • 1x FMC+ Site – High Serial Pin Count (HSPC)
  • DDR4-2133 SDRAM SO-DIMM
  • 1Gb FPGA configuration Flash
  • 256Mb Serial Flash
  • Single-lane SFP+ interface
  • Bidirectional x8 FireFly connection (optional)
  • CPLD on board
  • Standalone Operation (optional)

Abaco PC821 PCIe FPGA Card - Featuring an Ultrascale FPGA and two FMC sites

  • Virtex UltraScale (XCVU080, XCVU095, XCVU125) or Kintex UltraScale (XCKU085, XCKU095, XCKU115)
  • PCIe Gen3 x8 • 1x Primary FMC+ HSPC (front)
  • 1x Secondary FMC HPC (rear)
  • DDR4-2133 SDRAM SO-DIMM
  • 1Gb FPGA configuration Flash
  • 256Mb Serial Flash
  • Single-lane SFP+ interface
  • Bidirectional x8 FireFly connection (optional)
  • CPLD on board
  • Standalone Operation (optional)

Abaco VP430 3U VPX Direct RF Processing System Xilinx Zynq Ultrascale+ RFSOC

  • Zynq UltraScale+ RFSoC
    • Integrated ADC, DAC, programmable logic and processing subsystems.
  • ADC 8-channel 4GSPS 12-Bit
  • DAC 8-channel 6.4GSPS 14-Bit
  • Application Processing Unit
    • Quad-core ARM Cortex-A53
  • Real-time Processing Unit
    • Dual-core ARM Cortex-R5
  • Up to 16 GBytes DDR4
  • Single serial BLAST site
    • Configurable memory options.
    • Firefly Optical backplane option.
  • I/O
    • PCIe Gen3 x8
    • 2x USB 3.0 or DisplayPort™ with RTM311
    • SATA 3.1 M.2 2280 SSD with RTM311
    • VITA 66.4 8x FireFly™ Optical Interface for transfers up to 12 GB/s.

Abaco VP680 FPGA Card - 3U VPX with Virtex-6

  • Virtex-6 LX130T, LX240T, LX365T, SX315T, SX315T, SX475T
  • High density Memory Options using BLAST sites: DDR2 and DDR3 SDRAM, QDR2 SRAM, NAND FLASH.
  • VPX VITA 46 Compliant
  • Front Panel FPGA Mezzanine Card (FMC)
  • UART over USB
  • Gen 1 and Gen 2 PCI express
  • VITA 48.2 compliant (1 inch Pitch)

Abaco VP780 FPGA Card - 3U VPX with Virtex-7 FPGA

  • Virtex-7 XC7VX485T, XC7VX690T,
  • XC7VX980T, XC7VX1140T.
  • 2GBytes of DDR3 SDRAM in 4 independent 8-bit banks.
  • High density Memory Options using BLAST sites: additional DDR3 SDRAM (upto 8GB), QDR2+ SRAM (16MB), NAND FLASH.
  • VPX VITA 46 Compliant
  • Optional VITA 67 I/O
  • Front Panel FPGA Mezzanine Card (FMC)
  • Uart over USB

Abaco VP868 FPGA Card - 6U VPX Dual Ultrascale FPGA and Zynq Ultrascale+

  • Dual Xilinx UltraScale FPGAs
  • Kintex Ultrascale:
    • XCKU095, XCKU115,
  • Virtex Ultrascale:
    • XCVU080, XCVU095, XCVU125, XCVU160, XCVU190
  • Over 100 Gb/s Inter FPGA Communication Bandwidth
  • Dual FMC+ Sites (Vita 57.4)
  • Support for All Abaco Systems FMC Modules
  • Support for all Vita Compliant 3rd Party FMC Modules
  • Embedded Zynq Processor with 1GB DDR3 Memory
  • 2x GigaBit Ethernet with Abaco Systems IP Core
  • 36 GB Onboard DDR3 SDRAM Memory w/ ECC
  • VITA 65 OpenVPX Compliant
  • Expandable Storage with SSD Daughter Card
  • High Performance Abaco Systems PCIe IP Engine
  • Supported VPX Profile MOD6-PAY- 4F1Q2U2T-12.2.1-4

Abaco VP880 Ultrascale FPGA, Zynq Ultrascale+ and FMC+

  • Dual FPGA architecture
    • Kintex or Virtex Ultrascale
    • Zynq Ultrascale+ MPSoC
  • Up to 10GB DDR4 (L2-5 ruggedization), 18GB DDR4(L1 ruggedization)
  • VITA 57.4 HSPC FMC+ site interfacing with the Ultrascale FPGA
  • Conduction Cooled Configuration Available
  • VITA 66.4 optical interface via FireFly BLAST site
  • 1 GB Ethernet PHY to Backplane
  • Front Panel USB UART
  • USB 3.0, SATA 3.0, Display Port to Backplane RTM
  • VPX Back plane GPIO
  • I2C Interface P0 to Zynq
  • Operating system support
    • Linux®
    • Windows®
    • VxWorks®
  • Full-featured Board Support Package (BSP)
    • Open VHDL reference design
    • Open C/C++
    • PCIe™ core included with BSP
    • Peta Linux® reference design

Abaco VP889 Virtex Ultrascale+ FPGA, Zynq Ultrascale+ and FMC+ 3U OpenVPX FPGA Card

Processing
  • User Programmable Virtex Ultrascale+
  • Zynq Ultrascale+ MPSoC
Memory
  • 8 GB DDR4 mapped to FPGA
  • 2GB DDR4 mapped to Zynq
Analog and Digital I/O
  • 1x HSPC/FMC+ Site for Analog or Digital Input/Output
FLEXIBLE BACKPLANE OPTIONS
  • VITA 67.1 analog interface ports
  • VITA 66.4 Optical Interface via Firefly BLAST site (optional)
COOLING OPTIONS
  • Air, Conduction cooling (optional)

Acromag PMC-SLX - User-Configurable Spartan-6 FPGA Modules with Plug-In I/O

  • PMC-SLX150: 147,433 logic cells (XC6SLX150)
Acromag’s cost-effective PMC-SLX modules feature a user-configurable Xilinx® Spartan®-6 FPGA enhanced with high-speed memory and a high-throughput PCI-X interface. Field I/O interfaces to the PMC FPGA via the rear J4/P4 connector and/or with optional front mezzanine AXM plug-in I/O modules. The result is a powerful and flexible I/O processor module that is capable of executing custom instruction sets and algorithms.
The logic-optimized PMC FPGA is well-suited for a broad range of applications. Typical uses include hardware simulation, communications, in-circuit diagnostics, military servers, signal intelligence, and image processing.

Acromag XMC-7A200 - User-Configurable Artix-7 FPGA Modules with Plug-In I/O

  • Artix-7 FPGA with 200k logic cells.
  • 128M x 64-bit DDR3 SDRAM
  • 32M x 16-bit parallel flash memory for MicroBlaze FPGA program code storage.
Acromag’s XMC-7A modules feature a high-performance user-configurable Xilinx® Artix®-7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface. The result is a powerful and flexible I/O processor module that is capable of executing custom instruction sets and algorithms.
The logic-optimized FPGA is well-suited for a broad range of applications. Typical uses include hardware simulation, communications, in-circuit diagnostics, military servers, signal intelligence, and image processing.
Both front and rear I/O is supported. Front I/O processing is supported with plug-in AXM mezzanine cards. A variety of AXM I/O cards are available to add the flexibility of a wide range of analog and digital I/O to your design.

Acromag XMC-SLX - User-Configurable Spartan-6 FPGA Modules with Plug-In I/O

  • XMC-SLX150: 147,433 logic cells (XC6SLX150)
Acromag’s cost-effective XMC-SLX modules feature a user-configurable Xilinx® Spartan®-6 FPGA enhanced with high-speed memory and a high-throughput PCIe interface. Field I/O interfaces to the FPGA via the rear J4/P4 connector and/or with optional front mezzanine AXM plug-in I/O modules. The result is a powerful and flexible I/O processor module that is capable of executing custom instruction sets and algorithms.
The logic-optimized FPGA is well-suited for a broad range of applications. Typical uses include hardware simulation, communications, in-circuit diagnostics, military servers, signal intelligence, and image processing.
Large, high-speed memory banks enable efficient data handling. The dual-port SRAM facilitates high-speed DMA transfers to the bus or CPU. A high-bandwidth PCIe interface ensures fast data throughput.
64 I/O lines are accessible through the rear (J4) connector. Additional I/O processing is supported on a separate mezzanine card that plugs into the FPGA base board. A variety of these external AXM I/O cards are available to interface your analog and digital I/O signals.
Take advantage of the conduction-cooled design for use in hostile environments. Conduction efficiently dissipates heat if there is inadequate cooling air flow. Optional extended temperature models operate reliably from -40 to 85°C.