Products

Displaying 1 - 8 of 8

Acromag AcPC424 - Digital Input/Output Module Differential, TTL, Counter/Timer

  • 24 differential I/O, 16 TTL I/O
  • Four 16-bit counter/timer channels with six operating modes
The AcPC424 provides 24 differential input/outputs, 16 TTL input/output channels, and four 16-bit multifunction counter/timers.
The 16 TTL input/output channels can be programmed as inputs or as outputs on an individual channel basis. The 24 differential input/output channels are programmed as inputs or outputs on an 4-channel port basis. All input channels can be enabled for change of state, low, or high level transition interrupts.
This module saves money and CompactPCI slots by combining differential I/O, TTL I/O, and counter/timer functions on one card.

Acromag AcPC464 - Digital Input/Output and Counter/Timer

  • 64 digital input/output channels
  • 16-bit counter/timer channels with six operating modes
  • Change of state and level interrupts
The AcPC464 module provides 64 digital input/ output channels and four 16-bit multifunction counter/timers.
All 64 I/O channels, when set as inputs, support configuration for interrupts on either a change-of-state or on a high-to-low or low-to-high transition. A debounce timer is selectable to help filter out false transitions.
Four 16-bit multifunction counters/timers are configurable for pulse width modulated output, watchdog timer, event counter, frequency measurement, pulse width measurement, period measurement, or one shot pulse output. The four 16-bit counters can also be configured into two 32-bit counter/timers.
This module saves money and CompactPCI slots by combining digital I/O and counter/timer functions on a single card.

Acromag IP400 Digital Input Module, High Voltage Inputs

  • 40 input channels
  • 0-60V DC input range
  • Change-of-state/level interrupts (up to 12 channels)
The IP400 can monitor the on/off (high/low) status of up to 40 devices.
Loopback monitoring of critical control signals is easily accomplished with the IP400 by reading the output states of Acromag’s IP405 Output Module. The two modules share the same field interface pinouts for direct loopback compatibility.

Acromag IP408 Digital Input/Output Module, High Voltage I/O

  • 32 bi-directional digital input and/or output channels
  • 0-60V DC input and output range
  • Low-side output switches
  • Outputs sink up to 1A per channel
  • Change-of-state and level interrupts (up to 8 channels)

Acromag IP409 Digital Input/Output Module, Differential I/O

  • 24 differential digital input and/or output channels
  • Ruggedized RS-422A/485 transceivers
  • Interrupt support on all channels (change-of-state and high or low level transition
The IP409 provides 24 differential I/O channels with interrupts. Each channel is programmable as an input or an output on a bit basis, in any combination. All channels can generate change-of-state (COS), low, or high level transition interrupts.

Acromag IP440A Digital Input Module, Isolated

  • 32 port-isolated input channels
  • ±60V AC/DC input (three ranges)
  • Interrupt support for each channel
IP440A Industrial I/O Pack (IP) modules provide 32 optically isolated inputs to safely monitor a wide range of digital input voltage levels.
Isolation protects your computer system from noise, transient signals, and field wiring faults. The inputs are grouped into four 8-channel ports. Ports are isolated from the logic and each other.
Change-of-state interrupts are supported using paired channels. Debounce eliminates spurious interrupts from noise and switching transients for error-free edge detection.
Closed-loop monitoring of critical control signals is easily accomplished using the IP440A in conjunction with Acromag’s IP445 digital output module.

Acromag PMC408 Digital Input/Output Module, High Voltage I/O

  • 32 bi-directional digital inputs and/or outputs
  • 0-60V DC input and output range
  • Low-side output switches
  • Outputs sink up to 1A per channel
  • Change-of-state and level interrupts (up to 8 channels)

Acromag PMC424 Digital Input/Output Module, Differential, TTL, Counter/Timer

  • 24 differential I/O, 16 TTL I/O
  • Four 16-bit counter/timer channels, six operating modes
  • Change of state and level interrupts
The PMC424 digital I/O module provides 24 differential input/outputs, 16 TTL input/output channels, and four 16-bit multi-function counter/timers.