Sorensen - SLH DC High Power DC programmable Loads
-
Flexible Product Line
-
Low power DC modules
-
Low power AC modules
-
High power DC, 19" rack mounted loads
-
High power AC, 19" rack mounted loads
-
26 Total Models
-
-
Flexible Control
-
Remote: GPIB, RS-232, Analog
-
Manual: Front Panel
-
DC Modes: CC, CR, CV, CP
-
AC Modes: CR, CC with crest factor control
-
Dynamic mode with slew rate control
-
-
Flexible Data Feedback
-
GPIB, RS-232
-
Current monitor output (SLM DC only)
-
Front panel
-
From the leader in programmable power products, Sorensen introduces the SL series electronic loads which offer the best value with the most flexible platform. A wide range of loads are available from 75-1800W with both DC and AC input in benchtop, modular and standalone form factors.
The SLH Family is made up of fully programmable, high power AC or DC electronic loads. The 500V models are for PFC testing, power transformers and various other AC or DC power sources. The 300V models are used for testing of UPSs, automatic voltage regulators (AVR), and batteries.
- High current, 60V DC models for general purpose power supply testing
- High voltage, AC/DC models are intended for inverter test, Power Factor Correction (PFC) circuit testing (500V) and UPS testing (300V)
More Product Information
-
Redundant design with multiple signal paths built in for high-availability.
-
12 expansion slots in the 2U version and 5 expansion slots in the 1U variant.
-
Industry-first GPS integrity checking
-
Unique optical crosslink architecture for either Master-Slave hierarchical setups or Master-Master crosschecking and failover
-
2U version is operated by an intuitive touch-screen interface, a first for any master clock system.
-
All components are hot-swappable and are dual redundant.
-
The Output Signal modules are hot-swappable from the front and minimize the need to disconnect cables.
-
8000VA, 6000W, 220VAC 50/60Hz Input and 220VAC 50/60Hz Auto Sensing Output, Double Conversion, On Line, High Temperature, Isolated, Rugged UPS with Power Factor Correction for Military Applications
-
Up to 50mm measurement range using a 9.5 mm stainless steel rod
-
Rugged aluminum enclosure with IP67 rating; suitable for outdoor installations
-
Internal protection of connectors/splices
-
Double-ended design supports multiplexing of many sensors on one fiber
-
Fully temperature compensated over the entire operating range
-
Fast response time, stable measurements, high resolution
-
2000VA, 1400W Output, Double Conversion, Rugged, High Temperature, Global Wide Range, PFC Input, 85 to 265VAC Input, 50/60Hz Input, Online UPS Providing 120VAC, 50/60Hz Output with approximately 27-minute Battery Back Up, Power Factor Correction, Power Conversion and Power Conditioning in a 4U Aluminum Enclosure
-
Direct PC bus access data acquisition system provides the required sampling rate and resolution to meet IEC 61000-4-7 measurement requirements and supports high speed data transfers, unlike competing IEC test systems which provide only limited throughput using IEEE-488.
-
PC based Harmonic and Flicker test software provides real-time full color data display updates and continuous PASS/FAIL monitoring.
-
Automatic calculation of the maximum permissible system impedance Zsys, using the Zref and measured Flicker parameters, as required per EN/IEC 61000-3-11.
-
Simple user operation under Windows provides IEC test setup, data analysis, display and MS Word test reports.
-
High resolution, no gap acquisition data storage to ensure that all data can be streamed to disk (in ASCII format if needed) for later review and replay of actual test.
-
Single Step and Fast playback mode of test results
-
Fits into all standard in-wall junction boxes
-
Dual connection access via two USB ports
-
Broad range of applications chargeable
-
Independent from notebooks and PCs
-
No more external chargers required
-
Environmentally friendly and energy saving due to high efficiency and low standby-power
-
Easy handling and operation, fulfilling highest safety standards
-
400VA/250 Watt 120 VAC Input & Output Rugged, Rack Mount, Double Conversion, High Temperature, On-Line UPS & Isolated Power Conditioning System with Frequency Conversion, Power Factor Correction, Front Panel Hot Swap Battery & SNMP Communications for Military Applications in a 2U 13 inch deep enclosure
-
High Voltage (500V) Input
-
Digital control loop technology
-
Two models: 375W & 750W
-
Up to 750W/500V
-
Parallel up to 8 automatically
-
Modular
-
High Power Density
-
Simple integration
-
High accuracy throughout all ranges
-
8 Vpk floating outputs
-
Real and simulated transconductance amplifiers
AMETEK Programmable Power
Located in San Diego, California, AMETEK Programmable Power designs, manufactures, and markets precision, AC and DC programmable power supplies, electronic loads, application specific power subsystems, and compliance test solutions for customers requiring and valuing differentiated power products and services. Also part of our business is VTI Instruments, which delivers precision modular instrumentation and systems for electronic signal distribution, acquisition, and monitoring, used in the world's most demanding test applications.
AMETEK Programmable Power boasts one of the industries' broadest portfolios of programmable power products under the well-known and respected Sorensen, Elgar, and California Instruments brands. AMETEK Programmable Power’s products serve a wide range of stimulus (T&M) and process power needs in applications including semiconductor fabrication, commercial and defense ATE, oil exploration, solar array and battery string simulation, avionics, general R&D and EMC compliance testing.
VTI Instruments provides products and systems which are used to monitor and record data that characterizes the physical integrity and performance of aircraft, engines, and other large structures, as well as automate the functional testing of complex electronic systems. VTI Instruments is recognized as an industry leader with a reputation of providing reliable data, first time, every time.
With strong brands, a broad product portfolio, exceptional precision power conversion and control expertise, proven power system integration capabilities and deep applications knowledge, AMETEK Programmable Power is your source for programmable power supplies, precision data acquisition instruments, and more.
Contact Details
AMETEK Programmable Power, Inc. − San Diego
9250 Brown Deer Road, San Diego, CA 92121, USA
Phone: 858-450-0085
Fax: 858-458-0267
Email: sales.ppd@ametek.com for general inquiries