Southwest Microwave - SuperMini Board-to-Board (SSBB) Solutions
SuperMini Board-to-Board solutions optimize interconnect performance for board-to-board stacking applications.
Available bullets enable board-to-board spacing as close as 3 mm, assuring transmission line dependability for tightly stacked PCBs. Low mating insertion force allows for an increased density of interconnections per board. Unique bullet design enables extended mating and de-mating cycles.
Between Series 1.85mm (V) to SSBB Board-to-Board Adapters
|
Model Number |
Gender |
Bore Type |
Data Sheet |
|---|---|---|---|
|
1855010-01SF |
Female - Female |
Smooth |
SSBB Board-to-Board PCB Receptacle Edge Mount
|
Model Number |
Bore Type |
Circuit Launch |
Data Sheet |
|---|---|---|---|
|
Smooth |
Microstrip/GCPW |
||
|
Detent |
Microstrip/GCPW |
SSBB Board-to-Board PCB Receptacle Solder-On Vertical Mount
|
Model Number |
Bore Type |
Circuit Launch |
Tape and Reel Packaging |
Data Sheet |
|---|---|---|---|---|
|
55050-003J |
Smooth |
Stripline |
||
|
55050-004J |
Detent |
Stripline |
||
|
55053-002J |
Smooth |
Stripline |
||
|
55053-005J |
Smooth |
Stripline |
||
|
55053-005J-TR |
Smooth |
Stripline |
Yes | |
|
55053-006J |
Detent |
Stripline |
||
|
55053-006J-TR |
Detent |
Stripline |
Yes | |
|
55053-008J |
Detent |
Stripline |
||
|
55057-005J |
Smooth |
Microstrip/GCPW |
||
| 55057-006J | Detent | Microstrip/GCPW | ||
| 55057-009J | Smooth | Microstrip/GCPW | ||
| 55057-009J-TR | Smooth | Microstrip/GCPW | Yes | |
| 55057-010J | Detent | Microstrip/GCPW | ||
| 55057-010J-TR | Detent | Microstrip/GCPW | Yes | |
| 55057-011J | Smooth | Stripline | ||
| 55057-011J-TR | Smooth | Stripline | Yes | |
| 55057-012J | Detent | Stripline | ||
| 55057-012J-TR | Detent | Stripline | Yes |
SSBB Board-to-Board Bullet
|
Model Number |
Bullet Length |
Data Sheet |
|---|---|---|
|
54033-001B |
0.113 |
|
|
54033-002B |
0.149 |
|
|
54033-003B |
0.203 |
|
|
54033-004B |
0.103 |
|
|
54033-005B |
0.139 |
|
|
54033-006B |
0.193 |
|
|
54033-007B |
0.439 |
|
|
54033-008B |
0.452 |
SSBB Board-to-Board Female SMT Bullet
|
Model Number |
Circuit Launch |
Bullet Length |
Data Sheet |
|---|---|---|---|
|
54053-002B |
Stripline |
.063 |
SSBB Bullet 3mm Board-to-Board Spacing
|
Model Number |
Bullet Length |
Data Sheet |
|---|---|---|
|
54033-009B |
0.0825 |
SSBB Board-to-Board Cable Receptacle Direct Solder
|
Model Number |
Bore Type |
Cable |
Data Sheet |
|---|---|---|---|
|
55070-001J |
Detent |
.047 |
Between Series 2.92mm (K) to SSBB Board-to-Board Adapters
More Product Information
AR Microwave horns take microwave coverage to a new level. Our broadband RF and microwave horn antennas are specially designed to compensate for the losses that typically occur in test systems as frequency increases. They exhibit increasing gain with increasing frequency, up to 50 GHz. AR microwave horn antennas can be used in shielded rooms or in free space.
-
Best solution for high accuracy IV/CV, low-noise and 1/f measurements with PureLine, AutoGuard and next generation MicroChamber technologies
-
Enables up to 5x faster time to accurate data
-
Advanced 4-axis semi-automatic stage for accurate positioning and repeatable probe-to-pad contact
-
RF/microwave device characterization, 1/f, WLR, FA and design debug
-
Wide range of extremly performant, reliable thermal chuck systems from ATT
-
Easy on-screen navigation, wafer mapping, and operation of accessories and thermal systems with Velox
-
User-centered design minimizes training costs and enhances efficiency
See more Key Features on Specifications & Details tab
-
Combination of DC and RF in a single probe module: One dual probe or a maximum of three RF; a maximum of 9 DC standard (other quantities upon request).
-
Utilizes ACP tip design, GSG, GS or SG
-
RF tips available from DC to 110 GHz
-
Choice of BeCu or tungsten tips
-
DC power needles come standard with 100 pF microwave capacitor
-
Power bypass inductance: 8 nH
-
Maximum DC voltage: 50 V without power bypassing (25 V with standard power bypassing, and component dependent with custom power bypassing)
-
Ideal for probing the entire circuit for functional test
-
Dual ACP configuration supports differential signaling applications
-
DC probes can provide power or slow logic to circuit under test
-
Reduce corporate-wide software overhead and time to production
-
Standardize on ONE common, open-platform interface for all internal RF/Microwave or power projects
-
Modular design allows for scalable solutions in increments of 72 high-current sink, 12 reset/control and 32 TTL I/O channels
-
Design based on Industry Standards (LXI and IVI drivers) to ensure interoperabilty and ease of use
-
Graphical web-based command and control simplifies RF/Microwave system design and debug
-
Enhanced maintenance capability through tracking of relay cycle counts and remote monitoring of fault conditions
-
DC, AC and RF/microwave device characterization, 1/f, WLR, FA and design debug
-
Full thermal range of -60°C to +300°C
-
Reliable and repeatable contact
-
Moisture-free, light-tight and EMI-shielded test environment with MicroChamber® technology
-
Enables full access to the chuck and the auxiliary sites
-
Intuitive, and precise movement of chuck in X, Y, and Z-direction
-
High thermal stability components
-
On-axis probe-to-pad alignment
-
Flexibility from hot only to full thermal range of -60°C to +300°C
-
Thermally induced drift can be automatically re-aligned for 30 μm pads in a temperature range from -40°C to 150°C (the effective temperature range depends on pad size, probe card holder and probe card)
-
3 performance level configurations (fully-shielded / shielded / open)
-
Test automation out-of-cassette for higher test cell efficiency for over-night/over-weekend operation
-
User-centered design minimizes training costs and enhances efficiency
See more Key Features on Specifications & Details tab
-
3 Measurement States; Quiescent (OFF-State), Non Quiescent (ON-State), and Pre-State
-
-
The Pre State is a short high voltage state used to activate
the traps in the semiconductor.
-
-
-
Adjustable delay (Δt) between the Pre state and Non Quiescent state down to 0s.
-
Independently adjustable timing settings for the Three-state gate pulser and drain pulser
-
Easy Integration into existing mainframes
When test needs call for higher power and higher frequency, consider our “T” Series microwave amplifier line– 1 to 50 GHz, 40 to 20,000 W CW and Pulse. These amplifiers provide coverage for a wider range of high-power microwave test applications than any other brand of microwave amplifier on the market and are incredibly feature-rich.
They also offer an advanced design and highest quality construction of any TWT amplifier on the market.
Focus provides the deepest portfolio of wideband fundamental and harmonic passive tuners. Passive impedance tuners generate controllable reflection factor (Impedance) across the smith chart over a given frequency range. Focus uses two basic technologies:
-
From 100MHz to 120GHz we use the slide screw technique in which a reflective probe is inserted into a low loss slotted transmission line.
-
For frequencies from 10MHz to 170MHz we use a lumped element technology, whereby variable capacitors are connected with optimized lengths of coaxial cable. To view our Low Frequency Tuners, Click Here!
Most Focus Passive Tuners use long lasting RF probes which are designed for optimal tuning accuracy and are free of spurious resonances. The combination of multiple probes provide ultra wideband coverage in one single tuner. All Focus Passive Tuners are LAN controlled and include on-board impedance synthesis firmware.
For more information on Passive Tuners, visit our youtube channel!
Southwest Microwave offers a full range of within-series and between-series precision adapters with near-metrology grade performance.
- High performing connector savers, DC to 110 GHz
- Economical solution for critical production and testing
- Approved for demanding environments such as Space and other Hi-Rel applications
- High repeatability and accuracy
- Available in various connector configurations
Southwest Microwave
Since 1981, Southwest Microwave has delivered performance-leading interconnect solutions currently available from DC to 110 GHz for hi-rel/space, defense, instrumentation, integrated-circuit and PCB evaluation applications. Built in the USA to rigorous performance and quality standards, Southwest Microwave connectors deliver the industry’s lowest RF leakage, insertion loss and VSWR. Products include Super SMA, N, TNC, SSMA, 2.92mm, 2.40mm, 1.85mm, 1.35mm, 1.0mm and 0.9mm SuperMini connectors in a variety of mounting configurations, plus board-mount (end-launch, vertical launch, board-to-board) connectors, cable assemblies, coax contacts for multicavity connectors, adapters, installation tools and launch accessories for microstrip, stripline and coplanar launches.
Contact Details
Southwest Microwave - Corporate Headquarters
9055 S. McKemy St., Tempe, AZ 85284-2946, USA
Phone: 480-783-0201
Fax: 480-783-0360
Test & Measurement
Download Line Card
Document
Embedded
Download Line Card
Document
