VIAVI - UC-584 Universal Transponder Antenna Coupler
-
Reliable FAR Part 43 Appendix ‘F’ ERP and MTL testing in high multi-path environments
-
Provides >20 dB of antenna isolation for Mode S transponder altitude and diversity tests
-
Reduces interference with air traffic control and nearby aircraft
-
Rugged design for ramp use
-
Fits most ‘Shark Fin’ L-Band antennas
-
Quick action antenna grip/release action
The UC-584 Series Transponder Antenna Couplers are designed to solve the problem of reliable FAR Part 43 Appendix 'F' ERP (Effective Radiated Power) and transponder MTL (Minimum Trigger Level) testing, in the high multi-path ramp and hangar environments. The innovative design of these couplers include an integral positioning slot ensuring a high level of measurement repeatability is achieved, saving test time.
The UC-584 clamping mechanism is ideal for securing the coupler to the bottom antenna.
The UC-584S allows the operator to safely place the coupler onto the top antenna from the ground or ladder, using a pole, eliminating the need to climb on top of the aircraft.
Available through your GSA Supplier
Technical Specs
- Height 5.25 inches (13.3 cm) (max. antenna height is 2.7”)
- Width 5.75 inches (14.6 cm)
- Depth 8.25 inches (20.9 cm)
- Weight 2 lbs (0.9 kg)
More Product Information
-
32GTps, PCIe 5.0 data rate operation. Fully compatible with other PCIe data rates of 2.5, 5.0, 8.0 and 16 GTps
-
Link widths to 16-lanes, including 1-, 2-, 4-, 8-lanes
-
256GB memory (128GB upstream and 128GB downstream)
-
Memory segmentation for capture of multiple traces
-
Host-Client connection for remote debugging using Ethernet or local debugging using USB
-
SMB capture and trigger for NVMe Management Interface (NVMe-MI) observability
-
Simultaneous capture of multiple links is allowed with multiple simultaneous users
-
Decodes all PCIe, NVMe and CXL traffic at all layers of the stack including the TLP, DLLP, and PHY layer packets
-
Flexible trigger events include training sequences, ordered sets, queue pairs, PRPs, SGL, SMB, etc.
-
Cascade captures from up to four Xgig chassis into a single trace view
-
Full support of PCI Express LTSSM analysis
-
Field replaceable power supply
-
LEDs give quick indicators of power and link status
-
Includes one-year hardware and three-year software warranties
-
Works with the VIAVI Xgig software tool suite: Trace Control, Trace View, Expert™, Serialytics™
-
Supported by a wide variety of Interposers (CEM, U.3, etc.)
-
Accurate measurement of 121.5/243 MHz emergency beacon transmitter frequency, output power, modulation (AM). Headphone audio output to monitor swept tone *
-
Accurate measurement of 406 MHz COSPAS/SARSAT emergency beacon transmitter frequency, output power. Decode and display of all location and user protocols *
-
Accurate measurement of HF transmitter, frequency, output power, modulation (AM and SSB USB/LSB) receiver sensitivity
-
Accurate measurement of VHF/UHF transmitter, frequency, output power, modulation (AM and FM and receiver sensitivity)
-
Generation of ARINC 596 Selective Calling Tones
-
Accurate measurement of VHF/UHF antenna and or feeder SWR (Standing Wave Ratio)
-
Simulation of Localizer and Glideslope (CAT I, II and III) signals with variable DDM settings
-
Swept Localizer DDM for coupled Auto Pilot testing (Simultaneous Localizer, Glideslope and Marker signals)
-
Simulation of Marker Beacon, Selectable Airways (Z), Outer and Middle Marker Tones
-
Guided Test capability cuts down total test time
-
Low cost ELT option
-
Frequency counter provides external frequency measurement
-
MORSE CODE provides 1-4 characters transmitted in the VOR and ILS localizer mode
-
Eight or more hours of operation before recharge
-
Automatic power shut-down
-
Ergonomic design
-
High efficiency
-
Low no load power consumption 50mW
-
Meets DoE efficiency level VI
-
Meets CoC version 5 Tier 2 ready
-
Ultra-low leakage current ≤10μA
-
IEC 60601-1-2, 4th edition ready
-
Wide operating temperature range 0 - 45°C
-
Isolation 2x MOPP
-
Double housing safety: snapped & welded
-
Also available as version with fixed plugs: FOX12-FM-USB
-
Supports link widths up to and including 8-lanes
-
Operates up to 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe gen-1, gen-2 and gen-3 data rates of 2.5, 5.0 and 8.0GTps
-
A top edge 16-lane CEM slot connector accepts all endpoint DUT adapter cards
-
Bottom edge 8-lane PCB finger connector installs into host test system’s 4-, 8- or 16-lane PCIe slot
-
Supplied with four, high-quality SFF-8674 equivalent custom cables for Analyzer attachment
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning
-
Supports Analyzer side-band signal triggering and capture via custom cable
-
Supports clock and trigger I/O
-
Interposer power is independent of host system.
-
Power supply, 120/220 AC in, 12V/3A DC out converter is included
-
Custom, exchangeable brackets enable secure chassis and endpoint card installations
-
LEDs give quick indication of power and operation
-
Format: Design is based on the PCIe Card Electro-Mechanical (CEM) specification
-
Supports error injection for deep system analysis
-
Supported by Xgig tool suite including Trace Control, Expert™ and Serialytics™
-
Supports link widths up to 16-lanes
-
Operates up to 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe 1.0, 2.0 and 3.0 data rates of 2.5, 5.0 and 8.0GTps
-
A top edge 16-lane CEM slot connector accepts all endpoint DUT adapter cards
-
Bottom edge 16-lane PCB finger connector installs into host test system’s 16-lane PCIe slot
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning
-
Supports Analyzer side-band signal triggering and capture via custom cable
-
Supports error injection for deep system analysis
-
Interposer power is independent of host system. A 120/220 AC in, 12V/3A DC out converter is included
-
Custom, exchangeable brackets enable secure chassis and endpoint card installations
-
LEDs give quick indication of power and operation
-
Format: Design is based on the 16-lane Card Electro-Mechanical (CEM) specification
-
Size: 230mm deep x 185mm tall x 15mm thick
-
Supported by Xgig tool suite including Trace Control, Expert and Serialytics
-
Software-driven design allows for field updates for adding new features, capability or modifications due to industry changes
-
ADS-B Target Generator
-
ADS-B squitter encode/decode
-
DO-260, DO-260A and DO-260B data parsing
-
DO-260B canned tests available (option)
-
Generates ATCRBS/Mode S interrogations Multi-receiver test capability (option)
-
UAT TX/RX capability (optional)
-
Pulse and frequency measurement
-
10.4 inch touch screen LCD display for operator control of all test set capabilities
-
Remote controlled via GPIB or Ethernet
-
Two independent transmitters and receivers
-
TX/RX data logging capability
-
Full diversity testing capability
-
Data parsing in engineering units
-
Operates up to 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe data rates of 2.5, 5.0 and 8.0GTps
-
Supports 1 link of 4 or 8 lanes
-
EDSFF E1.L or E1.S NVMe SSD DUT (not supplied) plugs directly into the Interposer
-
Includes 4 high-quality, mini-SAS HD 4X cables for Analyzer connection
-
Data path uses high-speed linear redrivers to insure good signal capture with little or no tuning
-
Supports Analyzer side-band signal capture and triggering with display in multiple formats
-
The supplied power brick makes interposer power is independent of host system
-
Works together with the VIAVI Xgig 4K4 and 4K16 PCIe 4.0 Analyzer/Jammer chassis
-
Supported by VIAVI Xgig Analyzer tools for trace capture with filter, trigger and more
-
Provides consistent, repeatable capture of link training, equalization negotiation and other data
-
Operates up to 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe 1.0, 2.0 and 3.0 data rates of 2.5, 5.0 and 8.0GTps
-
Supports links of up to and including 4-lanes
-
NVMe SSD DUT (not supplied) plugs directly into the Interposer
-
Supplied with two high-performance custom cables for Analyzer attachment
-
Data path uses high-speed linear redrivers to ensure good signal capture with little or no tuning
-
Supports Analyzer side-band signal capture and triggering
-
Provides two differential clock connectors
-
Interposer power is independent of host system
-
A 120/220 AC in, 12V/3A DC output converter is included
-
LEDs give quick indicators of power and status
-
Format: Design based on 4-lane PCIe CEM specification
-
Supported by VIAVI Analyzer tools for trace capture with filter, trigger and more
-
Provides consistent, repeatable capture of link training, negotiation and other data
-
Supports error injection for deep system analysis
-
Supported by Xgig tool suite including Trace Control, Expert and Serialytics
-
Characteristics DT50 Medical: universal input 100 to 240 V AC
-
constant voltage
-
current limited
-
green LED indicator
-
leakage current ≤ 10 μA
-
continuously short circuit proof
-
2 x MOPP.
VIAVI
VIAVI is a leading worldwide provider of highly specialized test and measurement equipment and microelectronic solutions.
VIAVI Solutions is proud of our industry-leading network solutions for Telecommunications Service Providers, Equipment Manufacturers, Enterprises, and Entities in fields of Government and Avionics. VIAVI is consistently #1 or #2 in the markets we serve, including: Fiber, Cable, Access, Metro and Transport, RAN-to-Core, LandMobile and Military Radio and Nav/Comm and Transponder. We offer end-to-end network visibility and analytics that help build, test, certify, maintain, and optimize complex physical and virtual networks.
Our optical specialty products division is renown for expertise in anticounterfeiting pigment materials, 3D Sensing, and optical filters – holding #1 positions in those markets as well.
The pioneering spirit at VIAVI continues as we light the path to 5G with innovative test and measurement products, and lead the way with 3D sensing technology.
Contact Details
VIAVI Solutions Inc. Corporate Headquarters
6001 America Center Drive, 6th Floor, San Jose, CA 95002, USA
Phone: +1-408-404-3600
Fax: +1-408-404-4500