Luna - OCDR-1000 Optical Coherence Domain Reflectometer
-
Distributed reflectivity measurement
-
Event detectionLarge RL range
-
High spatial resolution
-
Clear identification of large and small peaks enables easier data interpretation
The OCDR-1000 is an optical coherence domain reflectometer designed to obtain space- resolved reflection information inside a fiber optical component, such as a Photonic Integrated Circuit (PIC) for diagnosing quality or design issues.
The OCDR-1000 is based on a polarization optimized white light interferometer. It is a low cost alternative to OFDR technology. The high dynamic range avoids the masking of small reflection peaks by the large reflections typical of the input surface of an optical device. A set of length matching delay modules is available to match the pigtail lengths of the devices to be measured and place the 600mm measurement span in the region of interest. With a reflection dynamic range of over 70 dB and a spatial resolution down to 15 μm, this instrument helps engineers and researchers see the inside of an optical device to precisely identify defects and their locations.
Wavelength | 1310 or 1550 nm |
---|---|
Spatial resolution | <20µm in SMF-28 fiber |
Spatial accuracy | <0.1 (±0.01%) mm in air |
Measurement range | 600mm |
RL dynamic range | 70 dB |
RL total measurement range | 10 to 88 dB |
RL sensitivity | −90 dB (−95 dB typical) |
RL accuracy | ±1.0 dB |
For full specifications, please download the data sheet.
More Product Information
-
400 MHz probe bandwidth
-
900 ps rise time
-
1000 Vrms maximum input
-
Up to 6 kV transient overvoltage
-
30 ms measurement speed
-
Wide wavelength range
-
High PDL accuracy
-
OLED display and analog output
-
Compact control unit
-
Easy touchscreen control
-
Up to 3 measurements displayed on the gauge
-
Integrated data processor
-
Ergonomic trigger to start measurement
-
1500VA, 1000W AC, 120VAC, 50/60Hz Input and 120VAC 50/60Hz Output, Double Conversion On-Line, High Temperature, Lithium Iron Phosphate Battery Hot Swap Drawer, Rugged UPS with Power Factor Correction
-
Complete built-in control for continuous and strobe modes
-
Adaptive Power™, a feature of the EuroBrite™ lighting controller, utilizes an onboard thermistor to maximize light output in continuous mode
-
Adaptive Overdrive,™ another feature of the EuroBrite™ lighting controller, provides a maximal output pulse in strobe mode regardless of the exposure period
-
IP67 sealed enclosure suitable for washdown environments
-
Rugged construction that has been tested to withstand over 1000lb.
-
Industrial grade LEDs providing high-intensity illumination of 45klux (working distance of 200mm)
-
Daisy chain up to 4 for a combined length of 48”
-
Full C-band tunability
-
Integrated wavemeter with sub-picometer accuracy
-
Smooth, linear scans
-
Narrow linewidth, low noise
-
External triggering
-
2 optical detectors and data acquisition channels
-
Industry leading wavelength accuracy and resolution
-
USB interface and full complement of software drivers
-
12 Hz acquisition rate
-
8.5 meter measurement range
-
0.0034% time-of-flight delay accuracy
-
20 micron sampling resolution
-
Optimize throughput with customized interface
Model FM7004A is an E-field control center that offers monitoring, display, and alarm capabilities for immunity-test environments. Exceptionally precise with auto-recognition to adapt to laser powered probes. The FM7004A is self-calibrating and is programmed to be self-correcting. The unit allows field-strength measurement at up to four probe locations simultaneously with results displayed on a backlit color LCD. Choose from any field probe with sensitivity from 0.4 to 1000 V/m, 0.012 – 17 A/m, and frequency response from 5 kHz to 60 GHz.
-
Ruggedized sensor package, qualified to same rigorous standards applied to electronic gages
-
Integrated temperature compensation FBG sensor
-
Connector protection fittings available for harsh environments
-
Double-ended design supports multiplexing of many sensors on one fiber
-
Two standard gage lengths of 25 and 100 cm
-
P67 rated for protection from dust and water ingress
Luna Innovations
Luna Innovations mission is to help advance the continuing increase in data transmission rates for the public & private communications network with high speed optical receivers and test products, while also leveraging our unique fiber optic sensing technology to improve the structural testing of new composite elements and components in new aircraft and automobiles.
Luna Innovations Incorporated (NASDAQ: LUNA) was founded in 1990 and has been successful in taking innovative technologies from the applied research stage to product development and ultimately to the commercial market. In some cases, the successes led to the creation of independent businesses. We have created companies in our area of focus, sold some of them to industry leaders in their fields, raised private capital, formed joint ventures and entered into a number of licensing agreements.
Contact Details
Luna Innovations Inc.
301 1st Street, SW, Suite 200, Roanoke, VA 24011, USA
Phone: 540-769-8400