Teledyne LeCroy - HVP120 400 MHz High Voltage Passive Probe
-
400 MHz probe bandwidth
-
900 ps rise time
-
1000 Vrms maximum input
-
Up to 6 kV transient overvoltage
The HVP120 is a high voltage passive probe designed for probing up to 1,000 Vrms and capable of handling up to 6,000 V peak transients. Its fast rise time and excellent frequency response make it suitable for a wide variety of high voltage measurement applications. The HVP120 features a spring loaded probe tip and a variety of standard accessories to make probing high voltages safe and easy.
Electrical Characteristics |
|
Bandwidth | 400 MHz |
Risetime (10% - 90%) | 900 ps (typical) |
Maximum Input Voltage (As defined in IEC 61010-031) | |
Measurement Category II | 1000 Vrms |
Measurement Category I | 4000V Transient Overvoltage at 1000 Vrms, 6000V Transient Overvoltage at 0 Vrms |
Pollution Degree (As defined in IEC 61010-031) | 2 |
Input Capacitance | 7.5 pF (typical) |
Compensation Range | 10 pF - 50 pF (typical) |
Attenuation Ratio | 100:1 ± 2% |
Environmental and Safety |
|
Temperature (Operating) | 0°C to 50°C |
Temperature (Non-Operating) | -40°C to 71°C |
Humidity (Operating) | 80% RH (Non-Condensing) up to 31°C, decreasing linearly to 40% RH at 50°C |
Altitude (Operating) | up to 2,000 m |
Altitude (Non-Operating) | up to 15,000 m |
General Characteristics |
|
Weight (probe) | 67 g (0.15 lbs) |
Cable Length | 2 m (6.56 ft) |
Probe Tip Diameter | 5 mm (0.20 inches) |
More Product Information
-
100 MHz, 200 MHz, 350 MHz, 500 MHz and 1 GHz bandwidths
-
Up to 4 GS/s sample rate
-
Long Memory – up to 20 Mpts
-
10.1” capacitive touch screen display
-
16 Digital Channel MSO option
-
MAUI - Most Advanced User Interface
-
Designed for Touch
-
Built for Simplicity
-
Made to Solve
-
-
Advanced Anomaly Detection
-
Fast Waveform Update
-
History Mode - Waveform Playback
-
WaveScan - Search and Find
-
-
Multi-Instrument Capabilities
-
Protocol Analysis - Serial Trigger and Decode
-
Waveform Generation - Built-in Function Generator
-
Digital Voltmeter and Frequency Counter
-
-
Future Proof
-
Upgradeable Bandwidth
-
Field Upgradable Software and Hardware Options
-
-
Static power analysis - like a dedicated power analyzer
-
Dynamic power analysis – capture more information
-
Complete test coverage – control system, power section, motor
-
Comprehensive mechanical interface
-
Harmonics calculation option
-
Vector display option (THREEPHASEVECTOR)
-
Waveform Transformations option (THREEPHASEdq0)
-
16 Channels with OscilloSYNC™
-
4 GHz or 6 GHz models
-
Up to 5 Vpk-pk dynamic range with low noise
-
±3 V offset range
-
Deluxe soft carrying case
-
Wide variety of tips and leads
-
Solder-In Lead
-
Positioner (Browser) Tip
-
Adjustable (Browser) Tip
-
Quick Connect Lead
-
HiTemp Solder-In Lead
-
-
Ideal for DDR2, DDR3, LPDDR2
-
Low loading and high imedance for minimal signal disturbance
The PPE series of probes are suitable for a wide range of applications where high-voltage measurements must be made safely and accurately. There are five fixed-attenuation probes covering a range from 2 kV to 20 kV, and one switchable probe providing ÷10/÷100 attenuation for voltage inputs up to 1.2 kV.
New technology which utilizes hybrid circuitry (and switch reading for probes with switchable gain/attenuation) minimizes ringing and overshoot to provide a precise response.
All fixed-attenuation, standard probes automatically re-scale any Teledyne LeCroy 9300C or LC series oscilloscope for the appropriate attenuation factor of the probe.
-
Highest resolution - HD4096 Technology, 12 bits all the time
-
Bigger Display, smaller footprint, most bench space
-
More capability, increased productivity
-
Easy to Use
-
No need to break the circuit or insert a shunt
-
Small form factors for use on crowded boards
-
-
Variety of Applications
-
Bandwidths up to 100 MHz
-
Peak currents up to 700 A
-
Sensitivities down to 1mA/div
-
-
High Precision Measurements
-
Low frequency accuracy of 1%
-
Integrated autozero capability
-
-
Fully Integrated with Teledyne LeCroy Oscilloscope
-
No additonal hardware is required
-
Power is supplied from oscilloscope ProBus connection
-
Automatic display of waveforms in Amps and calculated power traces scaled correctly in Watts
-
Degauss and Autozero directly from oscilloscope user interface
-
-
DCS025 Deskew Calibration Source
-
Provides ability to precisely deskew most voltage probes along with 30, 150 and 500A current probes
-
-
Up to seven operating modes: T3EL15060P & T3EL50015P - CC, CV, CR, CP, CC + CV, CR + CV, CP + CV. T3EL150302P & T3EL150303P – CC, CV, CR, CP.
-
Static, Dynamic and Sequence mode support.
-
Built in Application Functions: T3EL15060P & T3EL50015P - Soft Start, Battery Test Automation, OCP and OPP Test Automation. T3EL150302P & T3EL150303P – Short Circuit Test, Battery Test Mode, CR-LED Mode, OCP and OPP Test.
-
Provides a load of up to 300 Watts.
-
Programmable and analog external control.
-
High signal fidelity to 4 GHz bandwidth
-
Low circuit loading - High input impedance and low capacitance
-
4 GHz, 2.5 GHz, 1.5 GHz and 1 GHz models
-
1MΩ input resistance
-
0.6 pF (4 GHz)and 0.9 pF input capacitance
-
± 8 V input dynamic range, ± 12 V offset range
-
Wide variety of tips and grounds
-
Easy to use, integrated with oscilloscope
-
True Differential TDR with <3mm Spatial Resolution
-
Small Form Factor and Battery Powered
-
S Parameters up to 15 GHz
-
35 ps Rise Time (T3SP15D) 50 ps (T3SP10D)
-
Up to 50,000 points long memory
-
Emerging Serial Data Standards Testing
Teledyne LeCroy
Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively.
Oscilloscopes are tools used by designers and engineers to measure and analyze complex electronic signals in order to develop high-performance systems and to validate electronic designs in order to improve time to market. Protocol analyzers are tools used by designers and engineers to generate and monitor traffic over high speed serial data interfaces, including DDR, PCI Express, Fibre Channel, Serial ATA, SAS, USB and others. Both products are critical in the development of a wide variety of demanding design applications.
We utilize both of these important product areas in combination to tackle the most demanding serial data test applications, offering tailored solutions to help our customers perfect their chips, interfaces, subsystems and products which utilize these important communications standards. With the explosion in the use of serial data communications technologies in semiconductors, between devices on circuit boards and between computers and peripherals, we are aimed at a growing and important market.
Our oscilloscopes offer a powerful combination of large and informative displays combined with advanced waveshape analysis capabilities typically tailored to enhance the productivity of engineers in specific applications areas such as serial data test, disk drive test and automotive bus analysis.
Headquartered in Chestnut Ridge, New York, LeCroy has sales, service and development subsidiaries in the US and throughout Europe and Asia. LeCroy products are employed across a wide variety of industries, including semiconductor, computer, consumer electronics, military/aerospace, automotive/industrial, and telecommunications.
Contact Details
Headquarters Teledyne LeCroy
700 Chestnut Ridge Road, Chestnut Ridge, NY 10977-6499, USA
Phone: 800-553-2769 or 845-425-2000
Phone Support: 1-800-553-2769
Fax Sales: 845-578-5985
Email Sales: contact.corp@teledynelecroy.com
Email Support: support@teledynelecroy.com (Oscilloscopes, Waveform Generators, Signal Integrity)