-
The RL36120 is characterized as a Large Aimed Bright Field ring light.
-
Precisely aimed LEDs provide a level of lighting control not found in traditional illuminators.
-
A range of standoffs and fields of view may be specified at the time of order.
-
The ring light is available in a wide range of wavelengths from UV to IR, including a 3 channel RGB version. Diffuser and polarizer options are also available.
-
The large inner diameter of the ring light can accommodate lenses up to 55mm in diameter.
-
The light can also be ordered with an optional mounting ring.
Sorensen - SLD DC Low Power Dual Input programmable Loads
-
Flexible Product Line
-
Low power DC modules
-
Low power AC modules
-
High power DC, 19" rack mounted loads
-
High power AC, 19" rack mounted loads
-
26 Total Models
-
-
Flexible Control
-
Remote: GPIB, RS-232, Analog
-
Manual: Front Panel
-
DC Modes: CC, CR, CV, CP
-
AC Modes: CR, CC with crest factor control
-
Dynamic mode with slew rate control
-
-
Flexible Data Feedback
-
GPIB, RS-232
-
Current monitor output (SLM DC only)
-
Front panel
-
From the leader in programmable power products, Sorensen introduces the SL series electronic loads which offer the best value with the most flexible platform. A wide range of loads are available from 75-1800W with both DC and AC input in benchtop, modular and standalone form factors.
The SLD family offers six models of fully programmable, dual input modular electronic loads. These DC modules are specifically designed for low power, high channel count testing and provide the highest channel density available. (The double wide, dual channel module is seen here, but the single wide, dual channel model is not pictured.)
More Product Information
-
Allan deviation σ(τ) = 2.7×10-11 T-1/2 for long life version and σ(τ) = 8.5×10-12 T-1/2 for high performance version
-
Front or Rear access connectors
-
3U high (133mm / 5.24”) — less than 200mm depth, compatible with ETSI and 19” standards
-
Accuracy better than ±1×10-12 / ±5×10-13 for high performance version
-
10 MHz low noise direct output
-
Programmable 1 / 5 / 10 MHz TTL output
-
10 years warranty on cesium tube (3 years for high performance version)
-
Redundant DC power supply inputs
-
Remote control and monitoring via RS232 (fully manageable locally and remotely using SyncView Plus management system.
-
Enables wafer probing up to 100 A pulsed and 10A DC
-
Innovative multi-fingertip design provides even distribution of current
-
Supports up to 500 V
-
Replaceable Tungsten probe tips
-
Temperature range of -60°C to 300°C
-
Minimal contact resistance at the pad-tip junction to reduce heating during measurements, with fewer probe marks
-
Prevents against thermal runaway
-
Measure devices on wafer at higher currents than ever before
-
Small scrub minimizes damage to aluminum pad
-
Small footprint – tip fits on a 1 mm pad
-
Versatile temperature range for extreme environments
-
IEEE 1588 PTP
-
Power over Ethernet
-
P-Iris and DC-Iris lens control
-
Monochrome (GT2460) and color (GT2460C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope
-
Automatic probe detection
-
Provides all necessary power and offset control to the attached probe
-
Supports probes up to 4 GHz
-
Easy firmware updates
-
Wide variety of probes supported including:
-
Preamplifiers
-
Current Probes
-
Single-ended Active Probes
-
Differential Active Probes
-
-
Low running costs, less vibration, less noise, reduced maintenance
-
Large convenient experimental access: Up to 12 line-of-sight ISO100 ports located on perimeter of plates
-
CMN calibrated thermometry on MC plate
-
Operation via touch panel controller: Remote operation via ethernet interface
1U - 2U rugged rack servers supporting standard and non-standard form factor motherboards in any CPU architecture. Designed for maximum interoperability with today’s common building blocks to allow you to craft a bolstered server with lots of I/O options.
- Board Flexibility - Incorporate any standard motherboard that follows the system’s form factor to craft a solution according to your most complex requirements
- Future-proofed Design - Easily swap boards to upgrade your server without modifying the rest of the system’s architecture, increasing scalability and flexibility while reducing costs
- Undeniably Rugged - Certified to the most stringent military and industrial standards, ensuring maximum operational efficiency within the harshest of environments
-
High efficiency: up to 81.6 %
-
Low no load power consumption < 95 mW
-
Meets DoE efficiency level VI
-
CoC version 5 ready
-
Ultra-low leakage current ≤ 10 μA
-
IEC 60950-1, 4th edition ready
-
Wide operating temperature range 0 - 45°C
-
Double housing safety: snapped & welded
-
IP42 approved interchangeable plug system as additional accessories
-
Also available as version with fixed plugs: FOX6-F
-
Flexible Product Line
-
Low power DC modules
-
Low power AC modules
-
High power DC, 19" rack mounted loads
-
High power AC, 19" rack mounted loads
-
26 Total Models
-
-
Flexible Control
-
Remote: GPIB, RS-232, Analog
-
Manual: Front Panel
-
DC Modes: CC, CR, CV, CP
-
AC Modes: CR, CC with crest factor control
-
Dynamic mode with slew rate control
-
-
Flexible Data Feedback
-
GPIB, RS-232
-
Current monitor output (SLM DC only)
-
Front panel
-
AMETEK Programmable Power
Located in San Diego, California, AMETEK Programmable Power designs, manufactures, and markets precision, AC and DC programmable power supplies, electronic loads, application specific power subsystems, and compliance test solutions for customers requiring and valuing differentiated power products and services. Also part of our business is VTI Instruments, which delivers precision modular instrumentation and systems for electronic signal distribution, acquisition, and monitoring, used in the world's most demanding test applications.
AMETEK Programmable Power boasts one of the industries' broadest portfolios of programmable power products under the well-known and respected Sorensen, Elgar, and California Instruments brands. AMETEK Programmable Power’s products serve a wide range of stimulus (T&M) and process power needs in applications including semiconductor fabrication, commercial and defense ATE, oil exploration, solar array and battery string simulation, avionics, general R&D and EMC compliance testing.
VTI Instruments provides products and systems which are used to monitor and record data that characterizes the physical integrity and performance of aircraft, engines, and other large structures, as well as automate the functional testing of complex electronic systems. VTI Instruments is recognized as an industry leader with a reputation of providing reliable data, first time, every time.
With strong brands, a broad product portfolio, exceptional precision power conversion and control expertise, proven power system integration capabilities and deep applications knowledge, AMETEK Programmable Power is your source for programmable power supplies, precision data acquisition instruments, and more.
Contact Details
AMETEK Programmable Power, Inc. − San Diego
9250 Brown Deer Road, San Diego, CA 92121, USA
Phone: 858-450-0085
Fax: 858-458-0267
Email: sales.ppd@ametek.com for general inquiries