Sorensen - SLM 1/4 Mainframe Chassis, Single bay or 4 bay for SLM & SLD Modular loads
-
Flexible Product Line
-
Low power DC modules
-
Low power AC modules
-
High power DC, 19" rack mounted loads
-
High power AC, 19" rack mounted loads
-
26 Total Models
-
-
Flexible Control
-
Remote: GPIB, RS-232, Analog
-
Manual: Front Panel
-
DC Modes: CC, CR, CV, CP
-
AC Modes: CR, CC with crest factor control
-
Dynamic mode with slew rate control
-
-
Flexible Data Feedback
-
GPIB, RS-232
-
Current monitor output (SLM DC only)
-
Front panel
-
From the leader in programmable power products, Sorensen introduces the SL series electronic loads which offer the best value with the most flexible platform. A wide range of loads are available from 75-1800W with both DC and AC input in benchtop, modular and standalone form factors.
The SLM chassis are available in a convenient single-bay configuration (see image on the right) for benchtop/desktop applications and a four-bay configuration (see image on the left) for multichannel and ATE requirements. Either chassis is compatible with SLM- and SLD- loads. Each chassis contains non-volatile memory capable of storing up to 150 module setups and nine 16-step sequences for automated, standalone testing. Or for more complex test sequences, the chassis come with GPIB (optional on SLM-1) and RS-232 as standard interfaces.
More Product Information
-
Flexible Product Line
-
Low power DC modules
-
Low power AC modules
-
High power DC, 19" rack mounted loads
-
High power AC, 19" rack mounted loads
-
26 Total Models
-
-
Flexible Control
-
Remote: GPIB, RS-232, Analog
-
Manual: Front Panel
-
DC Modes: CC, CR, CV, CP
-
AC Modes: CR, CC with crest factor control
-
Dynamic mode with slew rate control
-
-
Flexible Data Feedback
-
GPIB, RS-232
-
Current monitor output (SLM DC only)
-
Front panel
-
-
High Power Density: up to 15 kW in 3U, 30 kW in a 6U chassis
-
Wide Voltage Range: 0-10V up to 0-1000V, from 4 to 30 kW
-
Fast Load Transient Response: Protection from undesired voltage excursions
-
Low Ripple and Noise
-
Hardware Trigger (Ethernet Option)
-
Parallelable up to 150 kW
-
Sequencing: Free system controller & speed up test
-
Low audible noise: Temperature controlled variable speed fans
-
High Power Density : 3 kW and 4 kW models, 2U (3½” high), (19” wide); no top or bottom clearance spacing required
-
Preview Push-button : Overvoltage protection (OVP), voltage and current preview buttons
-
Remote Voltage Sense : Sense leads are easily connected to a solderless connector
-
Parallel or Series Operation Field configurable
-
Power Factor Correction ≥0.98 1 Ф 3kW
-
Modular
-
Control up to 95 assets
-
Control multiple AC and DC power supplies and loads in one mainframe
-
Create “virtual assets”
-
Web browser control
-
User configurable
-
Highest Power Density
-
Simple integration
-
PFC
-
Universal AC/DC input
-
Up to 6kW in one mainframe
-
1kW DC modules
-
PFC ≥0.95
-
Reduced space and logistics hassles
-
High power density
-
Handles DC and AC power and load modules
-
User configurable
-
Universal AC/DC input
-
-
Ease of integration
-
Web browser control
-
Trigger bus
-
Configure modules to parallel or series operation "on the fly"
-
-
Three independent, isolated 1,700W channels, 5,100W total
-
1U rack-mount chassis
-
Eight output options
-
Multi-language, intuitive, color touch panel control
-
Global 3-Phase AC Input options for system phase balancing
-
Active power factor correction (PFC)
-
Multi-channel programmable sequencing, ramps, and delays
-
Full remote control via Virtual Panels™ GUI
-
Standard LXI Ethernet, USB and RS232 control interfaces
-
Optional GPIB control interface or isolated analog programming
-
High Power Density up to 150KW in a single bay rack-mount cabinet. Up to 240KW in a dual bay rack.
-
Fast Load Transient Response: Protection from undesired voltage excursions
-
Fast Slew Rate with exceptional rise/fall times for speed-critical applications
-
Low Ripple Suitable for the most sensitive applications
-
Low Audible Noise Temperature controlled variable speed fans
-
High accuracy Voltage/current measurements without external DMMs
-
Modular architecture simplifies sparing and maintenance
-
Industry Leading Power Density
-
Up to 1500 Watts in 1U
-
-
Standard Digital Interfaces – USB&RS232/485
-
LXI Ethernet and Isolated analog interfaces
-
Power Factor Correction-PFC and universal AC input
-
“Green” Sleep Mode – Automatically “sleeps” after period of non-use
-
Built in sequencing - Unload your system controller
-
Programmable fold-back protection delay
-
Up to 96 differential channels per full rack mainframe
-
Constantly monitor input signals for fault conditions
-
Flexible configurations for detecting edges, out-of-bounds conditions and measuring pulse widths
-
Inputs can be masked, inverted, and combined to produce interrupts
-
Can be used as a time stamp module and as a digital I/O
-
Programmable debounce circuitry prevents erroneous readings
-
10 V and 100 V input ranges
-
On-board memory stores events with IEEE 1588 timestamps
-
Synchronize reading of input states with other scanned analog channels
-
Precise programming of voltage and current slew rate for sensitive loads.
-
Modules within one chassis can be connected to different loads and controlled independently.
-
Industrial field bus interface (Modbus-TCP, Modbus-RTU, Ethernet/IP (Industrial Protocol)) enable real-time digital control.
-
Built-in energy meter calculates the delivered energy throughout a process or period of time.
-
Optional real time clock enables accurate timestamping of events.
-
Built in power quality monitoring detects and saves input voltage anomalies which can be saved for later diagnostic analysis.
-
Programmable analog interface scaling facilitates incorporating the ASD to existing systems with minimal effort.
-
Load impedance measurement, including rate-of-change calculations, enable load "state of health" monitoring and implementation of system preventive maintenance algorithms
-
Programmable filter bandwidth of the output voltage, current and power monitors let the user accommodate their response speed to particular needs.
-
Full featured GUI (Graphical User Interface) helps to test and debug the system by communicating with the power supply in real time.
AMETEK Programmable Power
Located in San Diego, California, AMETEK Programmable Power designs, manufactures, and markets precision, AC and DC programmable power supplies, electronic loads, application specific power subsystems, and compliance test solutions for customers requiring and valuing differentiated power products and services. Also part of our business is VTI Instruments, which delivers precision modular instrumentation and systems for electronic signal distribution, acquisition, and monitoring, used in the world's most demanding test applications.
AMETEK Programmable Power boasts one of the industries' broadest portfolios of programmable power products under the well-known and respected Sorensen, Elgar, and California Instruments brands. AMETEK Programmable Power’s products serve a wide range of stimulus (T&M) and process power needs in applications including semiconductor fabrication, commercial and defense ATE, oil exploration, solar array and battery string simulation, avionics, general R&D and EMC compliance testing.
VTI Instruments provides products and systems which are used to monitor and record data that characterizes the physical integrity and performance of aircraft, engines, and other large structures, as well as automate the functional testing of complex electronic systems. VTI Instruments is recognized as an industry leader with a reputation of providing reliable data, first time, every time.
With strong brands, a broad product portfolio, exceptional precision power conversion and control expertise, proven power system integration capabilities and deep applications knowledge, AMETEK Programmable Power is your source for programmable power supplies, precision data acquisition instruments, and more.
Contact Details
AMETEK Programmable Power, Inc. − San Diego
9250 Brown Deer Road, San Diego, CA 92121, USA
Phone: 858-450-0085
Fax: 858-458-0267
Email: sales.ppd@ametek.com for general inquiries