Product Finder
Displaying 1 - 25 of 58
Brandywine - Advanced FTSU-100D Frequency / Time Distribution Amplifier
-
Network Enabled Distribution Amplifier
-
Low Phase Noise Reference Frequency Outputs
-
Fault Alarm Output
-
1U 19" Rack Mount
-
Frequency Synthesizer Option
-
Hitless Switching of Reference
-
Programmable Amplitude
-
Propagation Delay Compensation
Brandywine - Airborne Time Code Processor (TCP-AS)
-
Flight Qualified
-
Support for IEEE-1588 and GPS Havequick II I/O
-
Input IEEE-1588 and Convert to IRIG A/B
-
Tested to MIL-STD 810F and 461E CE102 and RE 102
A multi-format precision time source in a small form factor with low power consumption. Can operate as a time code format translator: eg IEEE-1588 (PTP) to IRIG-B
Brandywine - AMC-Syncclock32 Fully compliant Advanced Mezzanine Card for time code synch. of ATCA chassis
-
Continual time error measurement between on-board clock and the reference input signals.
-
Error measurement adjustment for propagation delay.
-
Range of input and output options, including IRIG timecodes
-
Optional disciplined TXCO or OXCO.
-
3 user-programmable pulse rates
-
Optional GPS receiver
-
Time-tagging of external events
-
Match Time feature, from which Internal or External processes may be automatically initiated or terminated.
Brandywine - CPCI-SyncClock32 3U CPCI timing plug-in with +5V and +3.3V signaling
-
3U CPCI form factor
-
Optional Have Quick synchronization input
-
IRIG's A and B and NASA 36 time code inputs
-
1PPS sync input
-
IRIG B output
-
1PPS and time code inputs are redundant
-
Single-slot including GPS option
-
Zero latency time reads, microseconds through years
-
External Event input (optional eight and sixteen inputs)
-
Match Time output
-
Programmable Heartbeat rate
-
Many additional options
Brandywine - ENTA II - High Performance NTP Server with IRIG-B for GPS Synchronization
-
Versatile GPS Master Clock with IRIG-B reference input
-
Dual 10/100BaseT Network interface with Network Time Protocol (NTP)
-
Time Code Outputs, IRIG B, IRIG E, Have Quick
-
High Stability Ovenized oscillator is standard
-
Single string or dual redundant configuration
Brandywine - ENTA-R - High Performance NTP Server with IRIG-B for GPS synchronization
-
Versatile GPS Master Clock with IRIG-B reference input
-
Dual 10/100BaseT Network interface with Network Time Protocol (NTP)
-
Time Code Outputs, IRIG B, IRIG E, Have Quick
-
High Stability Ovenized oscillator is standard
-
Single string or dual redundant configuration
-
Ruggedized for Shipboard Usage
-
Dual Hot-Swappable Power Supplies
Brandywine - FDA-160i Advanced Distribution Amplifier
-
Network Enabled Analog Frequency Distribution Amplifier
-
Dual Frequency Inputs with Auto Failover
-
Any Frequency from 1-20MHz
-
Programmable per channel amplitude
-
Supports SNMP V2c
-
1U 19” rack mount
-
Redundant Hot Swap Power Supplies
Brandywine - FDU-160i Advanced Frequency Distribution Unit
-
Network enabled frequency
-
Distribution amplifier
-
Dual requency inputs with audio
-
Failover
-
Low phase noise referece
-
Frequency Outputs
-
Programmable per channel amplitude
-
1U 19" rack mount
-
Redundant hot swappable power supplies
Brandywine - FDU-240 Low Phase Noise Distribution Unit
-
5 MHz or 10 MHz Outputs Available
-
Reference Frequency Input Option
-
Auto Changeover with Ref. Input Option
-
Low Phase Noise Outputs
-
Twenty four Outputs
-
Front Panel Status Indicators
-
Fault Discrete Inputs
-
Compact 1U, 19" Rack Mount
Brandywine - FOA-160 Fiber Optic GPS/Glonass Antenna Splitter
-
16 way Optical GPS/GLONASS Antenna Distributor
-
Dual Redundant Power Supplies
-
Alarm Output
-
Run secure GNSS antenna feeds within buildings up to 2000m
Brandywine - Frequency Reference Unit (FRU)
-
Ultra-stable GPS Disciplined Frequency Reference
-
10 Independent 10MHz outputs
-
1U chassis
-
Meets MIL-STD-188-164A stability requirements
-
Frequency accuracy to 1 x 10-12
-
Dual Port NTP Server
Brandywine - FTSU-100 Time and Frequency Distribution and Transfer Switch
-
Frequency and time outputs
-
Low phase noise frequency output
-
1PPS output
-
Hitless fequency switching
Brandywine - GPSDO - GPS Disciplined Oscillator Module
-
3 isolated low phase noise 10MHz outputs
-
Internal GPS Tracking Receiver
-
External 1PPS input
-
Small footprint designed for easy integration
-
Disciplined high stability OCXO
Brandywine - HPTS Modular Time & Frequency System
-
Modular Timing System
-
Flexible
-
Upgradeable
-
Redundant
-
Hot Swappable Modules
-
High Accuracy
-
Network-Centric
-
Rugged
-
Environmentally Qualified
-
Automatic Propagation Delay Compensation
-
Flexible input reference – GPS, Have Quick, IRIG B
Brandywine - HQS (HaveQuick Splitter)
Brandywine Communication’s Havequick/1PPS Distribution Amplifier (HQS) is a small rugged, powered Havequick/1PPS distribution module mounted in a 4” x 4” x 2.5” environmentally secure enclosure. The HQS can provide an MTBF up to 1 million hours depending on configuration.
Brandywine - IBU-160i Intelligent Distribution Amplifier
-
Network Enabled Time Code Distribution Amplifier
-
Dual Time Code Inputs with Auto Failover
-
Support for Analog Time Codes between 100Hz and 100KHz
-
Programmable per channel amplitude
-
Supports SNMP v2c
-
1U 19” rack mount
-
Redundant Hot Swappable Power Supplies
Brandywine - IBU-240 Low Frequency Distribution Amplifier w/ Dual Input to 24 Output
-
Wide Input Bandwidth
-
Input Isolation
-
Automatic & Manual Changeover
-
Transformer Coupled Outputs
-
24 Outputs
-
Front Panel Status Indicators
-
Compact 1U, 19" Rack Mount
Brandywine - IDC-100 Network Time Device
-
Uses Network Time Server to synchronize computers and other devices
-
Programmable serial message compatible with almost any time display
-
Browser based user interface for easy setup
-
Compact size and low cost
-
IRIG B input reference
-
LED colons indicate GPS lock status
Brandywine - IEEE-1588 PTP80 Grand Master Clock
-
Uses Precision Time Protocol (PTP) to IEEE-1588 v2
-
Distributes time to remote PTP clients and slaves over a network
-
Advanced hardware-generated timestamps
-
GPS input source
-
Provides ±100 nanosecond timing accuracy (when locked to GPS)
-
Internal disciplined oscillator provides stability if input source interrupted
-
Choice of outputs include 1PPS & 10MHz (IRIG-B & E1/T1 optional)
-
19 inch 1U high rack mountable chassis
Brandywine - M210 Modular Network Time Server with GPS or IRIG Input & Expansion Slots
-
3-slot module output capacity
-
Choice of clock Synchronisation options
-
Choice of master clock accuracy
-
Large range of output options
-
1U high standard 19" rack mount
-
5-segment front panel button for equipment configuration and control
-
Large alphanumeric display of time, date and status
-
Equipment configuartion stored in non-volatile memory
Brandywine - M211 Modular Network Time Server with GPS or IRIG Input & Expansion Slots
-
9-slot module output capacity
-
Choice of clock synchronisation options
-
Choice of master clock accuracy
-
Large range of outpout options
-
3U high standard 19" rack mount
-
5-segment button front panel keyboard for equipment configuration and control
-
Alphranumeric display of time, date and status
-
Equpment configuration stored in non-volatile memory
Brandywine - Miniature Airborne Timecode Processor (TCP-AM)
-
A multi-format precision time source in a very small form factor with low power consumption.
-
Can operate as a time code format translator: eg IEEE-1588 (PTP) to IRIG-B
Brandywine - Miniature GPS Disciplined Oscillator
-
Uncompromising performance
-
Low phase noise 10 MHz output
-
Internal GPS Tracking Receiver
-
Very small footprint designed for pomponent-level integration
-
Disciplined high-stability OCXO
Brandywine - Modular Master Clock
-
Redundant design with multiple signal paths built in for high-availability.
-
The modular design is highly adaptable and can be field-upgraded, allowing a future-proof solution
-
12 expansion slots in the 2U version and 6 expansion slots in the 1U variant.
-
Ideal for applications that require an unusual mix of interfaces
-
Unique optical crosslink architecture for either Master-Slave hierarchical setups or Master-Master crosschecking and failover
-
2U version is operated by an intuitive touch-screen interface, a first for any master clock system.
-
All key components are hot-swappable and are dual redundant.
-
The Output Signal modules are hot-swappable from the front, eliminating the need to disconnect cables.
-
Secure Management interface through SNMPv3 and encrypted password access from the front panel
Brandywine - NFS-220 Network Ready GPS Time and Frequency Standard
-
CD-GPS-060 Have Quick/1PPS input references
-
Choice of Disciplined Oscillator
-
High Stability Time and Frequency outputs. 1U 19” rack mount
-
Network Interface for remote management and NTP server
-
Three 1PPS outputs with propagation delay compensation
-
Multiple time code outputs (IRIG B, A, E, G) Four 10 MHz Sine wave outputs
-
Have Quick time code
-
Advanced Oscillator Control Algorithm
