Product Finder

Displaying 1 - 11 of 11
Product Results:
Brandywine - Advanced FTSU-100D Frequency / Time Distribution Amplifier

Brandywine - Advanced FTSU-100D Frequency / Time Distribution Amplifier

Network Enabled Distribution Amplifier Low Phase Noise Reference Frequency Outputs Fault Alarm Output 1U 19" Rack Mount...
Brandywine - FDA-160i Advanced Distribution Amplifier

Brandywine - FDA-160i Advanced Distribution Amplifier

Network Enabled Analog Frequency Distribution Amplifier Dual Frequency Inputs with Auto Failover Any Frequency from 1-20MHz...
Brandywine - FDU-160i Advanced Frequency Distribution Unit

Brandywine - FDU-160i Advanced Frequency Distribution Unit

Network enabled frequency Distribution amplifier Dual requency inputs with audio Failover...
Brandywine - FDU-240 Low Phase Noise Distribution Unit

Brandywine - FDU-240 Low Phase Noise Distribution Unit

5 MHz or 10 MHz Outputs Available Reference Frequency Input Option Auto Changeover with Ref. Input Option Low Phase Noise...
Brandywine - FOA-160 Fiber Optic GPS/Glonass Antenna Splitter

Brandywine - FOA-160 Fiber Optic GPS/Glonass Antenna Splitter

16 way Optical GPS/GLONASS Antenna Distributor Dual Redundant Power Supplies Alarm Output Run secure GNSS antenna feeds within buildings up to...
Brandywine - FTSU-100 Time and Frequency Distribution and Transfer Switch

Brandywine - FTSU-100 Time and Frequency Distribution and Transfer Switch

Frequency and time outputs Low phase noise frequency output 1PPS output Hitless fequency switching...
Brandywine - HQS (HaveQuick Splitter)

Brandywine - HQS (HaveQuick Splitter)

Brandywine Communication’s Havequick/1PPS Distribution Amplifier (HQS) is a small rugged, powered Havequick/1PPS distribution module mounted in a 4” x 4” x 2.5”...
Brandywine - IBU-160i Intelligent Distribution Amplifier

Brandywine - IBU-160i Intelligent Distribution Amplifier

Network Enabled Time Code Distribution Amplifier Dual Time Code Inputs with Auto Failover Support for Analog Time Codes between 100Hz and 100KHz...
Brandywine - IBU-240 Low Frequency Distribution Amplifier w/ Dual  Input to 24 Output

Brandywine - IBU-240 Low Frequency Distribution Amplifier w/ Dual Input to 24 Output

Wide Input Bandwidth Input Isolation Automatic & Manual Changeover Transformer Coupled Outputs...
Brandywine - PDU-240 Pulse Distribution Unit - Multi Channel Pulse Distribution Unit

Brandywine - PDU-240 Pulse Distribution Unit - Multi Channel Pulse Distribution Unit

Dual inputs with manual or automatic switchover 24 individually buffered outputs Pulse rates from 1ppm through 10MPPS available...
Brandywine - TDU-310 Pulse/Data Distribution Amplifier

Brandywine - TDU-310 Pulse/Data Distribution Amplifier

Dual Inputs with automatic switchover 10 individually buffered outputs of 3 signal ouputs Have Quick, BCD, and 1PPS outputs compliant with ICD-...

  • Three-phase power quality recorder with an Android tablet wireless front panel interface
  • Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
  • Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording


  • 320 x 240 resolution
  • 2 meter drop test
  • LaserSharp™ Auto Focus
  • Manual or automatic focus
  • Measure up to 650 °C


  • Withstands drops up to 4-meters (13 feet) with industrial strength casing and holster
  • Waterproof, dustproof IP67 case for the most extreme work sites
  • Premium TL175 TwistGuard™ test leads
  • Double the battery life of the 87V (up to 800 hours); backlit keys for dark environments


Installs and grounds in less than 5 minutes Save time with quick and easy installation with the CV Series – 5 minutes or less .
  • One technician
  • One hole with standard Greenlee® punch
  • Panel door does not need to be removed
  • Grounds instantly to metal enclosure with patent-pending AutoGround™ process
  • Maintains panel arc test ratings up to 63kA when properly installed
Work more efficiently with Fluke ClirVu® CV301 75 mm (3 in) Infrared Windows
  • NFPA 70E processes significantly reduced due to less work permit requirements
  • Faster and more comfortable inspections because full PPE is often not required
  • Reduce the risk of arc-flash and electrocution, increase the safety of your personnel and reduce the time and cost of preventive maintenance
  • CV301 is Torture Tested™ to the highest arc blast test ratings IEEE C37.20.7: 63 kA Arc tested at KEMA, UL 50/50E/50V, UL1558, IEC60529-1: IP67, IEC 60068, NEMA 4/12, CSA C22.2 NO. 14-13:2012, and CE
  • Convenience of both quick turn or security keyed access

  • Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
  • Large digit display with bright, two-level backlight makes the 83V significantly easier to read than older models
  • 6000 counts, 3-3/4 digits
  • Measure up to 1000 V AC and DC
  • Measure up to 10 A, 20 A for up to 30 seconds
  • Frequency to 200 kHz and % duty cycle
  • Resistance, continuity and diode test
  • 10,000 µF capacitance range for components and motor caps
  • Min/Max-Average recording with Min/Max Alert to capture variations automatically
  • Relative mode to remove test lead interference from low ohms measurements
  • Auto and manual ranging for maximum flexibility
  • Touch Hold to capture stable readings avoiding noisy signals
  • Large display digits and two-level bright white backlight for increased visibility
  • Analog bargraph for fast changing or unstable signals
  • Input Alert provides audible warning against wrong use of input jacks
  • Improved selectable sleep mode for long battery life
  • Access door for fast battery changes without breaking the calibration seal
  • "Classic" design with new removable holster with built in test lead and probe storage
  • Lifetime warranty
Electrical safety
All inputs are updated to the 3rd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600 V and CAT III, 1000 V. They can withstand impulses in excess of 8.000 V and reduce risks related to surges and spikes.
  • Measure AC current with an optional current clamp accessory