Product Finder

Displaying 1 - 6 of 6
Product Results:
Advanced Illumination - LL137 Medium Intensity Line Lights

Advanced Illumination - LL137 Medium Intensity Line Lights

The LL137 Series provides a focused line of illumination in a passively cooled design. Provides a medium intensity level of 280kLux (working distance of 75mm...
Advanced Illumination - LL158 Oblique Line Lights

Advanced Illumination - LL158 Oblique Line Lights

The LL158 Series produces an oblique (30°) line of illumination for line scan applications in a passively cooled design. Light exits 30° from...
Advanced Illumination - LL163 Classic Line Lights

Advanced Illumination - LL163 Classic Line Lights

Our classic LL163 Line Lights are suitable for low intensity, low speed line scan applications. These line lights are well established and have proven reliability...
Advanced Illumination - LL167 High Intensity White Line Lights

Advanced Illumination - LL167 High Intensity White Line Lights

The LL167 Series provides a focused line of illumination in a passively cooled design. Only available in White (for color illumination in a similar package refer...
Advanced Illumination - LL230 Ultra High Intensity Line Lights

Advanced Illumination - LL230 Ultra High Intensity Line Lights

This ultra high intensity line light series is built to handle to most extreme line scan requirements. Provides an intensity level of 2,100kLux (working distance...
Advanced Illumination - LL232 MicroBrite™ Line Lights

Advanced Illumination - LL232 MicroBrite™ Line Lights

Part of the MicroBrite™ family of high performance, compact machine vision lights. This line light series utilizes a fresnel lens for a compact form factor...

  • Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
  • Large digit display with bright, two-level backlight makes the 83V significantly easier to read than older models
  • 6000 counts, 3-3/4 digits
  • Measure up to 1000 V AC and DC
  • Measure up to 10 A, 20 A for up to 30 seconds
  • Frequency to 200 kHz and % duty cycle
  • Resistance, continuity and diode test
  • 10,000 µF capacitance range for components and motor caps
  • Min/Max-Average recording with Min/Max Alert to capture variations automatically
  • Relative mode to remove test lead interference from low ohms measurements
  • Auto and manual ranging for maximum flexibility
  • Touch Hold to capture stable readings avoiding noisy signals
  • Large display digits and two-level bright white backlight for increased visibility
  • Analog bargraph for fast changing or unstable signals
  • Input Alert provides audible warning against wrong use of input jacks
  • Improved selectable sleep mode for long battery life
  • Access door for fast battery changes without breaking the calibration seal
  • "Classic" design with new removable holster with built in test lead and probe storage
  • Lifetime warranty
Electrical safety
All inputs are updated to the 3rd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600 V and CAT III, 1000 V. They can withstand impulses in excess of 8.000 V and reduce risks related to surges and spikes.
  • Measure AC current with an optional current clamp accessory


  • 200 A AC and DC current measurement with detachable jaw
  • 600 VAC and DC voltage measurement
  • Detachable jaw makes accessing wires and viewing the display easier
  • Built in flashlight/torch allows for easy illumination and identification of wires
  • CAT III 600 V
  • Compact design fits in your hand and can be used while wearing protective equipment
  • State of the art signal processing allows for use in noisy electrical environments while providing stable readings
  • Large, easy to read, backlight display automatically sets the correct measurement range so you do not need to change switch positions while taking a measurement
  • Three-year warranty
  • Soft carrying case


  • VCHEK™ LoZ low impedance measurement function to simultaneously test for voltage or continuity*
  • True RMS for accurate AC measurements on non-linear loads
  • A large backlit display allows for easy visibility in low-lit areas
  • Record signal fluctuations using the Min/Max function
  • Diode test for testing general-purpose germanium, silicon, and power diodes
  • Integral holster with probe holders for easy storage
  • Auto and Manual ranging for added user functionality
  • The optional TPAK magnetic hanger allows the user hands-free flexibility


The 721Ex can be configured by selecting either a 16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then add any of 7 high pressure ranges including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar).

  • Intrinsically Safe (721Ex version only) – IECEx and Atex Ex ia IIB T3 Gb (Zone 1)
  • Ideal for gas flow calibration (custody transfer) applications
  • Two isolated, stainless steel, pressure sensors with 0.025 % accuracy
  • Pt100 RTD input for temperature measurement, (probe optional)
  • Switch test on both pressure inputs
  • Pressure displayed in the user’s choice of 19 engineering units
  • Large backlit graphic display can display up to three inputs simultaneously
  • Store five instrument setups for recall and use


  • Lightweight, portable, and fast
  • Built-in two-channel readout for PRT, RTD, thermocouple, 4-20 mA current
  • True reference thermometry with accuracy to ±0.01 °C
  • On-board automation and documentation
  • Metrology performance in accuracy, stability, uniformity, and loading