Product Finder

Displaying 1 - 14 of 14
Product Results:
Matrox Imaging - Clarity UHD

Matrox Imaging - Clarity UHD

Capture from legacy to the latest video sources through support for standard definition (SD) analog to ultra-high definition (UHD) digital formats Connect and...
Matrox Imaging - Concord Family of Gigabit Ethernet NICs and IEEE 1394b adaptors

Matrox Imaging - Concord Family of Gigabit Ethernet NICs and IEEE 1394b adaptors

PCIe® x1 or conventional 32-bit PCI low-profile card lifecycle managed and long term availability GigE Vision or IIDC support through Matrox...
Matrox Imaging - Concord PoE Multi-port Gigabit Ethernet adaptors with PoE for GigE Vision

Matrox Imaging - Concord PoE Multi-port Gigabit Ethernet adaptors with PoE for GigE Vision

Simplify cabling between cameras and vision computer through PoE support Facilitate multi-camera configuration with two or four Gigabit Ethernet ports...
Matrox Imaging - Morphis Family

Matrox Imaging - Morphis Family

PCIe® x1, PCI (-X2) or PCI-104 form factor captures from NTSC, PAL, RS-170 and CCIR video sources dual/quad video decoder architecture for...
Matrox Imaging - Orion HD Graphics and video capture card with SD/HD capabilities

Matrox Imaging - Orion HD Graphics and video capture card with SD/HD capabilities

Maximize performance and compatibility by way of a PCIe® x16 half-length card design Capture from a variety of legacy and state-of-the-art video sources with...
Matrox Imaging - Radient eV-CL Feature-packed high-performance Camera Link frame grabber

Matrox Imaging - Radient eV-CL Feature-packed high-performance Camera Link frame grabber

Support the most high-performance Camera Link cameras with available support for Full and 80-bit mode at up to 85 MHz. Perform deterministic image acquisition by...
Matrox Imaging - Radient eV-CLHS Value-packed high-performance Camera Link HS frame grabber

Matrox Imaging - Radient eV-CLHS Value-packed high-performance Camera Link HS frame grabber

Capture from the next generation of higher resolution and higher speed cameras using the Camera Link HS M-Protocol interface. Ensure reliable delivery to host...
Matrox Imaging - Radient eV-CXP Value-packed high-performance CoaXPress frame grabber

Matrox Imaging - Radient eV-CXP Value-packed high-performance CoaXPress frame grabber

Capture from the next generation of higher resolution and higher speed cameras using the CoaXPress (CXP) interface Acquire from multiple independent cameras at...
Matrox Imaging - RadientPro CL Vision Processor Board

Matrox Imaging - RadientPro CL Vision Processor Board

Capture images at the highest Camera Link rates with support for the Full and 80-bit modes at up to 85MHz (single-Full model). Eliminate lost pixels through a PCIe...
Matrox Imaging - Rapixo CXP Multi-link CoaXPress 2.0 frame grabbers with optional FPGA-based image proccessing offload

Matrox Imaging - Rapixo CXP Multi-link CoaXPress 2.0 frame grabbers with optional FPGA-based image proccessing offload

Support for the highest speeds available in CoaXPress 2.0 Connect and capture from up to four cameras or combine connections for even higher data rates...
Matrox Imaging - Solios eA/XA Analog Frame Grabber

Matrox Imaging - Solios eA/XA Analog Frame Grabber

PCIe x1 or PCIe x4 (eA), or PCI-X (XA) card up to four fully independent inputs 10-bit A/D converters sampling rate up to 65...
Matrox Imaging - Solios eCL/XCL-B Entry-level Camera Link frame grabber

Matrox Imaging - Solios eCL/XCL-B Entry-level Camera Link frame grabber

PCIe x1 (eCL) or PCI-X (XCL) low profile half-length card handles one Base Camera Link configuration provides PoCL (Power over Camera Link) with...
Matrox Imaging - Solios eV-CL Value-packed Camera Link frame grabber

Matrox Imaging - Solios eV-CL Value-packed Camera Link frame grabber

perform deterministic image acquisition by way of the jitter-free Camera Link interface eliminate missed frames through a PCIe x4 host interface and ample on-board...
Matrox Imaging - Vio Family of HD/SD analog/digital video capture/display boards

Matrox Imaging - Vio Family of HD/SD analog/digital video capture/display boards

PCIe x4 short card analog HD/SD input and output2,3,4 HD/SD SDI input and output1,2,3,4 low-latency video output...

  • Rugged versatile IR thermometer for non-contact temperature applications
  • Provides easy targeting bright laser beam
  • Measures temperatures from -18 to 275°C (-0 to 525°F) with 0.2°C (0. 5°F) resolution
  • Clearly presents data at a glance on the large backlit display
  • Includes a shock-absorbing holster to increase ruggedness
  • Provides an 8:1 distance to spot ratio


  • Measure voltage, current, active power, reactive power, apparent power, power factor and harmonics with associated values
  • Get accurate, precise results with 0.1% measurement accuracy and a 500kHz bandwidth
  • Take precision power measurements almost anywhere – highly portable, battery powered analyzer weighing only 3.5kg with up to 10 hours of battery life


  • Power quality that meets the standard All measurements comply with IEC61000-4-30 standards for correct evaluation of all measured values including voltage, current, power, harmonics, flicker etc.
  • Quick and reliable configuration A tablet computer provides a window into what the instrument is recording, enabling quick and reliable configuration even in awkward test locations
  • Threshold-free set up Apply thresholds after data is collected with Fluke Power Analyze Software – no need to worry about missed information due to incorrect setups
  • Captures everything Cross-channel and current triggering capture every measurement, on every channel, every time
  • Intuitive PC software Easily analyze data and generate reports with automated EN50160 reporting and compliance
  • Reporting has never been easier Auto Report creates either standard reports or customized reports with the minimum effort or hassle. Export reports to almost any format including RTF (Rich Text Format) for editing in Microsoft Word.
  • Plug and play Set up in minutes with self-identifying current probes and single-lead voltage connections
  • No need to reconnect wires Swap channels internally with the wireless PDA or PC when connections are not correct
  • Measure every parameter Voltage and current on three phases, neutral, and ground
  • 5 MHz, 8000 Vpk waveform capture Get a detailed picture of even the shortest events
  • Quickly retrieve data With included SD memory card or via the 100 BaseT high-speed Ethernet connection. SD card includes automatic download to SD when no other connection is made to the instrument


  • Two electrically isolated inputs
  • CAT III 1000 V / CAT IV 600 V safety rated
  • 100 MHz bandwidth model
  • 1.25 GS/s
  • Deep memory: 10,000 samples per channel waveform capture so you can zoom in on the details
  • Dedicated 5000 Count digital multimeter in 2-channel models
  • Connect-and-View continuous auto-trigger, single shot, pulse width, and video triggering
  • ScopeRecord roll mode, capture waveform sample data for up to 48 hours
  • TrendPlot, trend measurement readings for up to 22 days
  • Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
  • IP-51 rated for dust and drip proof to withstand harsh environments
  • Isolated USB ports for memory devices and PC connectivity
  • Li-Ion battery for extended operating timespan: up to 4 hours (BP290 included standard) or up to 8 hour with optional BP291
  • Charge spare battery using optional external battery charger (EBC290)
  • Easy-access battery door to make it easy to swap batteries
  • A handy slot to tether and lock down the oscilloscope while unattended using a standard Kensington® lock


The 1586A Super-DAQ is the most accurate and flexible temperature data acquisition system on the market. It scans and records temperature, DC voltage, DC current, and resistance for up to 40 input channels and scan speeds as fast as 10 channels per second. The Super-DAQ can be configured for use as a multi-channel data logger in the factory or as a precision reference thermometer for benchtop sensor calibration in the lab.

  • Measure thermocouples, PRTs, thermistors, DC voltage, DC current, and resistance
  • Best-in-class temperature measurement accuracy
    • PRTs ±0.005 °C (using external DAQ-STAQ Multiplexer)
    • Thermocouples: ±0.5 °C (using High-Capacity Module and internal CJC)
    • Thermistors: ±0.002 °C
  • Input channels: Up to 40 isolated universal inputs
  • Flexible configuration: Internal High-Capacity Module and/or DAQ-STAQ Multiplexer
  • Selectable scan speed: Up to 10 channels per second
  • Four modes of operation: Scan, Monitor, Measure, Digital Multimeter (DMM)
  • Real-time color trending: Chart up to four channels simultaneously
  • 6 1/2 digit display resolution for DC voltage, DC current, and resistance
  • Current reversal minimizes thermoelectric effects, improving PRT/RTD measurment accuracy
  • Automated sensor calibration: Control Fluke Calibration temperature sources such as dry-wells or micro-baths for automated calibration routines
  • Data storage: Records up to 20 MB of data and setup files to internal non-volatile memory or to an external USB drive. Transfer data to a PC using the USB drive or LAN connection and view data in Microsoft® Excel
  • Data security: Administrator and user profiles for protecting settings and ensuring test traceability
  • Mx + B scaling and channel offset zero function
  • Alarms: Two independent, user-defined alarms for each channel indicate when an upper or lower range has been exceeded