Preparation of cable samples for further processing Applicable for cable types with solid core cross-sections E.g. Sample preparation for cutting with ORC family

Easy separation of cable jackets from the electrical conductor Suitable for samples with a high strip force Also designed for larger sample outer diameters (depending on wall thickness) Suitable preparation before cutting cable samples for measuring (e.g. with the ORC-series) Robust, stable construction Easy to use

Very robust device for quick and efficient cutting of flat cables Exact adjustment of the sample thickness (depending on material) Thin, evenly and parallel cut samples with a smooth surface (especially the very small and many cores require a very thin cut to avoid shadows) Precise and repeatable measuring results due to reproducible samples

Sample preparation according to IEC 60811-501, -507 Available with either 100mm (3.93“), 75 mm (2.95“) or 50 mm (2.97“) dumb-bell tool For inspecting cable sheaths in laboratories As a preparation for further tests Applicable for all cable types Cutting surface also available individually

Quick and efficient cut Thin, evenly and parallel cut samples with a smooth surface Very robust device made of aluminum and stainless steel - no corrosion By using special chuck jaws it is even possible to cut larger samples with an outer diameter up to 200 mm (7.87“) Light to illuminate the cutting process Precise and repeatable measuring results possible with the cut samples

Sample preparation according to IEC 60811 Sample cutting device for cutting very small samples up to 3.5 mm (0.14“) outer diameter depending on material and wall thickness Easy and fast operation Robust, compact device out of stainless steel - no corrosion 4 different adapters to stabilize the samples On request more adapters of different sizes available - Product No.: 402.0007.13

Ideal cutting results Improved sample quality through an exact and reproducible sample thickness Suitable for a wide variety of materials Robust and durable blade with double wear time (2-sided usable) Exact adjustment of the rotating speed The influence of the operator is minimized by the predefined blade feed Fine, manual dosing of the progressive feed Easy exchange of the wire grips possible, with standard tooling Intelligent control electronics ensure an intuitive and safe operation

Excellent cutting results through precision cutting Improved sample quality through an exact and reproducible sample thickness Very durable blade, 7 times blade rotation possible (360°) Exact adjustment of the rotating speed The influence of the operator is minimized by the predefined blade feed Fine, manual dosing of the progressive feed Easy exchange of the wire grips possible, with standard tooling Intelligent control electronics ensure an intuitive and safe operation

Vacuum pump to pick up small cable samples Suitable for the cable measuring device VCPLab and the cable o ring cutter ORC Micro

Device is according to the standard IEC 60811 -501, -507 (heat elongation test, tensile test) The samples are taken from the inner side of the sheath and isolator All grooves and/or conductive layers are removed Developed to slice samples according to IEC 60811 with a thickness between 0.8 and 2.0 mm (0.04” – 0.08”)

Device is according to the standard IEC 60811 -501, -507 (Heat elongation test, tensile test) Handy, electric device for material tests in laboratories Developed to slice samples according to IEC 60811 with a thickness between 0.8 and 2.0 mm (0.04” – 0.08”) Especially for hard materials

Cutting block SB 18 - The cutting base can be rotated 4 times and is exchangeable always an optimal cutting base Cutting knife - With special blades for an optimal cutting of the cable samples Special blades - These blades are especially developed for cable preparation Cable strippers - Different sizes