Product Finder

Displaying 1 - 4 of 4
Product Results:
PowerGridm - 1000 Watts / VA Standalone UPS

PowerGridm - 1000 Watts / VA Standalone UPS

Ruggedized 1U 1000 Watts / VA UPS weighing in at 30 Lbs. Stack and Interconnect Design for 1000/2000/3000/4000 Watts. Dual Hot Swap Battery...
PowerGridm - 1500 VA – 1200 Watts Standalone UPS

PowerGridm - 1500 VA – 1200 Watts Standalone UPS

Ruggedized 1U 1200 Watts / 1500 VA UPS weighing in at 27 Lbs. Stack and Interconnect Design for 1200/2400/3600/4800/6000 Watts. Hot Swap Battery...
PowerGridm - 3000 VA – 2400 Watts Standalone / Tactical UPS

PowerGridm - 3000 VA – 2400 Watts Standalone / Tactical UPS

Ruggedized 2U 2400 Watts / 3000 VA UPS weighing in at 50 Lbs. Available in 1/2/3 phase input power configurations. Stack and Interconnect Design...
Powergridm - 800 Watts / VA Standalone UPS – Tactical UPS

Powergridm - 800 Watts / VA Standalone UPS – Tactical UPS

Ruggedized 1U 800 Watts / VA UPS weighing less than 26 Lbs. Stack and Interconnect Design for 800/1600/2400/3200 Watts. Dual Hot Swap Battery...

Fluke 789 Temperature Kit features:

  • Unique new wireless measurement logging capability
  • Temperature measurement from -200 °C to 1372 °C using the t3000 FC
  • 24 V Loop power supply
  • HART mode setting with loop power (adds 250 ohm resistor)
  • 100% larger dual display
  • 1200 ohm drive capability on mA source
  • Enhanced backlight with two brightness settings
  • 0% to 100% mA Span Check buttons to toggle between 4 and 20 mA
  • Infrared I/O serial port compatible with
  • FlukeView® Forms Software Version 2.1
  • Externally accessible fuses for easy replacement

These 787 features are also included in the 789:

  • DMM designed to meet 1000 volt IEC 1010 CAT III standards
  • Precision 1000 V, 440 mA True-RMS digital multimeter
  • Frequency measurement to 20 kHz
  • Min/Max/Average/Hold/Relative modes
  • Diode test and continuity beeper
  • Simultaneous mA and% of scale readout
  • 20 mA DC current source/loop calibrator/ simulator
  • Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
  • Externally accessible battery for easy battery changes


  • IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
  • Designed to withstand 3 meter drop (with holster)
  • Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
  • MSHA approval
  • Limited lifetime warranty


  • Four electrically isolated inputs
  • CAT III 1000 V / CAT IV 600 V safety rated
  • 200 MHz bandwidth model
  • 2.5 GS/s
  • Deep memory: 10,000 samples per channel waveform capture so you can zoom in on the details
  • Quad meter measurements via scope BNC inputs
  • Connect-and-View continuous auto-trigger, single shot, pulse width, and video triggering
  • ScopeRecord roll mode, capture waveform sample data for up to 48 hours
  • TrendPlot, trend measurement readings for up to 22 days
  • Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
  • IP-51 rated for dust and drip proof to withstand harsh environments
  • Isolated USB ports for memory devices and PC connectivity
  • Li-Ion battery for extended operating timespan: up to 7 hours (BP291 included standard)
  • Charge spare battery using optional external battery charger (EBC290)
  • Easy-access battery door to make it easy to swap batteries
  • A handy slot to tether and lock down the oscilloscope while unattended using a standard Kensington® lock


  • 320 x 240 resolution
  • 2 meter drop test
  • LaserSharp™ Auto Focus
  • Manual or automatic focus
  • Measure up to 650 °C


  • Power quality statistics according to EN50160
  • Voltage event list (dips, swells and interruptions)
  • Continuous recording of:
    • Voltage
    • Current
    • Power P, Q, S
    • Power factor
    • kWh
    • Flicker
    • Unbalance
    • Frequency
    • Voltage and current harmonics to the 50th / Interharmonics
    • THD
    • Mains signaling
  • Triggered recordings
  • Online mode (Oscilloscope, transients and events)
  • 2 GB Flash memory