Product Finder

Displaying 1 - 14 of 14
Product Results:
Brandywine - Advanced FTSU-100D Frequency / Time Distribution Amplifier

Brandywine - Advanced FTSU-100D Frequency / Time Distribution Amplifier

Network Enabled Distribution Amplifier Low Phase Noise Reference Frequency Outputs Fault Alarm Output 1U 19" Rack Mount...
Brandywine - FDA-160i Advanced Distribution Amplifier

Brandywine - FDA-160i Advanced Distribution Amplifier

Network Enabled Analog Frequency Distribution Amplifier Dual Frequency Inputs with Auto Failover Any Frequency from 1-20MHz...
Brandywine - FDU-160i Advanced Frequency Distribution Unit

Brandywine - FDU-160i Advanced Frequency Distribution Unit

Network enabled frequency Distribution amplifier Dual requency inputs with audio Failover...
Brandywine - FDU-240 Low Phase Noise Distribution Unit

Brandywine - FDU-240 Low Phase Noise Distribution Unit

5 MHz or 10 MHz Outputs Available Reference Frequency Input Option Auto Changeover with Ref. Input Option Low Phase Noise...
Brandywine - FOA-160 Fiber Optic GPS/Glonass Antenna Splitter

Brandywine - FOA-160 Fiber Optic GPS/Glonass Antenna Splitter

16 way Optical GPS/GLONASS Antenna Distributor Dual Redundant Power Supplies Alarm Output Run secure GNSS antenna feeds within buildings up to...
Brandywine - FTSU-100 Time and Frequency Distribution and Transfer Switch

Brandywine - FTSU-100 Time and Frequency Distribution and Transfer Switch

Frequency and time outputs Low phase noise frequency output 1PPS output Hitless fequency switching...
Brandywine - HPTS Modular Time & Frequency System

Brandywine - HPTS Modular Time & Frequency System

Modular Timing System Flexible Upgradeable Redundant Hot Swappable Modules High Accuracy...
Brandywine - HQS (HaveQuick Splitter)

Brandywine - HQS (HaveQuick Splitter)

Brandywine Communication’s Havequick/1PPS Distribution Amplifier (HQS) is a small rugged, powered Havequick/1PPS distribution module mounted in a 4” x 4” x 2.5”...
Brandywine - IBU-160i Intelligent Distribution Amplifier

Brandywine - IBU-160i Intelligent Distribution Amplifier

Network Enabled Time Code Distribution Amplifier Dual Time Code Inputs with Auto Failover Support for Analog Time Codes between 100Hz and 100KHz...
Brandywine - IBU-240 Low Frequency Distribution Amplifier w/ Dual  Input to 24 Output

Brandywine - IBU-240 Low Frequency Distribution Amplifier w/ Dual Input to 24 Output

Wide Input Bandwidth Input Isolation Automatic & Manual Changeover Transformer Coupled Outputs...
Brandywine - PDU-240 Pulse Distribution Unit - Multi Channel Pulse Distribution Unit

Brandywine - PDU-240 Pulse Distribution Unit - Multi Channel Pulse Distribution Unit

Dual inputs with manual or automatic switchover 24 individually buffered outputs Pulse rates from 1ppm through 10MPPS available...
Brandywine - PTS-SAASM - GPS SAASM based network ready master clock with disciplined Rb Oscillator

Brandywine - PTS-SAASM - GPS SAASM based network ready master clock with disciplined Rb Oscillator

GSP disciplined atomic clock Network time server Dual redundant version available Complete remote network control using...
Brandywine - TDU-310 Pulse/Data Distribution Amplifier

Brandywine - TDU-310 Pulse/Data Distribution Amplifier

Dual Inputs with automatic switchover 10 individually buffered outputs of 3 signal ouputs Have Quick, BCD, and 1PPS outputs compliant with ICD-...
Brandywine - TFD-8000 Highly reliable, extremely flexible Time and Frequency Source

Brandywine - TFD-8000 Highly reliable, extremely flexible Time and Frequency Source

The TFD8000 is composed of a chassis/backplane and a large library of plug-in features that include: Frequency Synthesizers SA-ASM or CA code GPS receivers...

  • Large display
  • Backlight for work in dim areas
  • Min / Max to record signal fluctuations
  • Ergonomic overmolded housing with integrated probe holders
  • Free your hands with the optional TPAK magnetic hanger
  • Auto and Manual ranging
  • Meets Measurement Category 1000 V CAT III and Category IV 600 V safety standards
The 77 IV replaces the 77. Move up to superior utility and safety today.


  • Power quality statistics according to EN50160
  • Voltage event list (dips, swells and interruptions)
  • Continuous recording of:
    • Voltage
    • Current
    • Power P, Q, S
    • Power factor
    • kWh
    • Flicker
    • Unbalance
    • Frequency
    • Voltage and current harmonics to the 50th / Interharmonics
    • THD
    • Mains signaling
  • Triggered recordings
  • Online mode (Oscilloscope, transients and events)
  • Fast transient analysis up to 10 MHz
  • 4, 600 V voltage probes
  • 4 dual-range flexible current probes (1000 A / 200 A AC)
  • GPS time sync receiver
  • 2 GB Flash Memory


Fluke CLKT Infrared Windows are Available in Three Sizes 50 mm (2 in), 75 mm (3 in) and 100 mm (4 in)

Each CLKT infrared window is engineered and tested to withstand electric-arcs up to 50 kA for 30 cycles.

The ClirVu® coating - exclusive to Fluke infrared windows - seals the optic prior to assembly to protect against moisture degradation making it perfect for very hot and very cold outdoor environments.

Each Fluke infrared window is delivered with an identification plate attached for unique, on-site numbering for rapid location confirmation and faster repairs.

CLKT infrared windows come complete with a security access key, installation instructions and self-adhesive drilling template.

For 5 minute or less installation and Autoground consider the CV300.


  • 320 x 240 resolution
  • 2 meter drop test
  • LaserSharp™ Auto Focus
  • Manual or automatic focus
  • Measure up to 650 °C


  • Two electrically isolated inputs
  • CAT III 1000 V / CAT IV 600 V safety rated
  • 200 MHz bandwidth model
  • 2.5 GS/s
  • Deep memory: 10,000 samples per channel waveform capture so you can zoom in on the details
  • Dedicated 5000 Count digital multimeter
  • Connect-and-View continuous auto-trigger, single shot, pulse width, and video triggering
  • ScopeRecord roll mode, capture waveform sample data for up to 48 hours
  • TrendPlot, trend measurement readings for up to 22 days
  • Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
  • IP-51 rated for dust and drip proof to withstand harsh environments
  • Isolated USB ports for memory devices and PC connectivity
  • Li-Ion battery for extended operating timespan
    • Up to 7 hour (BP291 included standard)
    • Charge spare battery using optional external battery charger EBC290
  • Easy-access battery door to make it easy to swap batteries
  • A handy slot to tether and lock down the oscilloscope while unattended using a standard Kensington® lock