Brandywine - IBU-240 24 Output IRIG B Distribution Amplifier
- Wide Input Bandwidth
- Input Isolation
- Automatic & Manual Changeover
- Transformer Coupled Outputs
- Twenty four Outputs
- Front Panel Status Indicators
- Fault Discrete Inputs
- Compact 1U, 19” rack mount
The Brandywine Communications Model IBU-240 offers the user modern, often requested and reliable time code distribution features. The base unit outputs twenty-four time code outputs that are transformer-coupled from the rear panel connectors to the transfer switch. Each output is a faithful reproduction of the time code input.
A three-position front panel switch chooses automatic operation or may be used to manually select one of the two input sources. When the AUTO mode is selected the AUTO indicator will be illuminated and Input A will be used if it is available. Should Input A fail Input B will be chosen automatically. Indicators show the status of the inputs and which input has been selected.
Each of the twenty-four outputs is monitored. Should an output fail a group alarm Fault indicator will illuminate.
Variations
|
Model Number |
Base Model |
Description |
Oscillator Type |
Power Supply |
Form Factor |
Power Type |
Output Format |
Number of Outputs |
Input Format |
Number of Inputs |
|
IBU-240 |
IBU-240 |
IRIG Distribution Amplifier, 24 Channel Output |
N/A |
Single AC |
1U |
AC |
IRIG |
24 |
IRIG |
2 |
|
IBU-240-2x12 |
IBU-240 |
IRIG Distribution Amplifier, 2 x 12 Channel Outputs |
N/A |
Single AC |
1U |
AC |
IRIG |
24 |
IRIG |
2 |
| IBU-240 |
IBU-240 |
IRIG Distribution Amplifier, 24 Channel Output, Cap Power Cord |
N/A |
Single AC |
1U |
AC |
IRIG |
24 |
IRIG |
2 |
Time Code Inputs
|
Number of Inputs |
2 |
|---|---|
|
Connector Type |
BNC |
|
Input Amplitude |
4 Vpp |
|
Input Impedance |
600 Ohms, transformer isolated |
|
Frequency |
300 Hz to 50 kHz |
Fault Discrete Inputs
|
Number of Inputs |
2 |
|---|---|
|
Connector Type |
DB9 |
|
Levels |
TTL |
|
Active Level |
Link selectable, high or low |
Time Code Outputs
|
Number of Outputs |
24 |
|---|---|
|
Connector Type |
BNC |
|
Output Amplitude |
Same as Input |
|
Isolation |
Transformer coupled |
|
Output Impedance |
600 ohms |
|
Output Protection |
Short-circuit proof |
Fault Sense and Transfer
|
Modes |
Automatic and Manual |
|---|---|
|
Manual |
Selects input A or input B |
|
Automatic |
Provides automatic switch from A to B should input A fail |
Indicators
|
Power |
Green LED |
|---|---|
|
Input A-B Selected |
Green LEDs, two |
|
Input A-B Available |
Green LED's, two |
|
Fault |
Red |
Environmental
|
Temperature |
|
|---|---|
|
Operating |
0 to +50°C |
|
Storage |
-40 to +85°C |
|
Humidity |
To 95% non-condensing |
Physical
|
Dimensions |
19 in. Rack Mount, 1/73 in. high (1U), 14.5 in. deep |
|---|---|
|
Weight |
7.5 lb. typical |
Power
|
Power |
115/230 VAC, 50/60 Hz |
|---|---|
|
Power Consumption |
<25 W |
EMC
|
EMC Emission |
To EN50081-1 as EN55022 |
|---|---|
|
EMC Immunity |
To EN50082-1 as EN1000-4-2 ESD, IEC 801-3 HF Field, IEC 801-4 Burst |
Document
More Product Information
Brandywine Communication’s Have Quick/1PPS Distribution Amplifier (HQS) is a small rugged, powered Have Quick/1PPS distribution module mounted in a 4” x 4” x 2.5” environmentally secure enclosure. The HQS can provide an MTBF up to 1 million hours depending on configuration.
- 2-port VNA with frequency options from 1 MHz to 8 GHz / 20 GHz / 43.5 GHz (options for 20, 50, and 100 meters)
- Extend remote ports 100 meters apart with PhaseLync synchronization
- Small and lightweight ports enable direct connection to DUT eliminating long cable runs
- Guaranteed performance to 43.5 GHz with Extended-K™ ports
- PC control takes advantage of external computer processing power and functionality
- No on-board data storage makes use in secure applications more convenient
- Common ShockLine control software delivers powerful debug and test capabilities
- PhaseLync control module MN25132A
See "Specifications & Details" tab for more information
- Single-slot 32 bit PCI Express module
- IRIG A, B, NASA 36, 1 PPS sync inputs
- GPS sync option (maintains single-slot)
- HaveQuick sync input option
- Propagation delay correction
- Zero latency time reads
- Match Time output
- IRIG-B time code output (option)
- External Event time tags
- Three user programmable rates
- Supports Windows 8 & 10
- Digitally Signed WHQL Driver
- 6U, Single Width VME
- Time Code Inputs
- Time Code Output
- 1PPS Pulse Rate Output/Interrupt
- Frequency Outputs (1, 5, 10 MHz)
- External Event Capture/Interrupt
- Programmable Periodic Output/Interrupt
- Programmable Time Strobe Output/Interrupt
The TEM horn antenna is an antenna used for conducting close proximity radiation immunity evaluation test (near electromagnetic field immunity test) of electromagnetic waves radiated from various wireless transmitters such as mobile devices.
In the future, close proximity radiation immunity evaluation test using the TEM horn antenna is expected to expand to various product standards such as medical equipment (IEC 60601-1-2) and multimedia equipment (CISPR 35). NoiseKen's TEM horn antenna has a wide band, low VSWR, and wide electric field uniformity offering an ideal solution for an efficient close proximity radiation immunity test.
- A TEM horn antenna compliant with IEC 61000-4-39 Ed.1.
- Test without changing the antenna in the frequency range of 380MHz to 6GHz.
- Low VSWR and high GAIN enable efficient electromagnetic wave radiation.
- Wide field uniformity reduces the number of times of movement of the antenna when radiating the EUT.
- Since the maximum point of the near electric field distribution for each frequency is at the center, enables radiation on the EUT based on the axis of the antenna. Hence, significantly simplifies test point alignment.
-
IMX392 CMOS sensor
-
ALVIUM image processing
-
MIPI CSI-2 interface
-
Various hardware options
-
Monochrome (1800 C-240m) and color (1800 C-240c) models
-
ALVIUM® Technology for on-board image processing
-
MIPI CSI-2 interface with up to 4 lanes
-
Platform concept that enables the operation of different Alvium camera models with a common software
-
Hirose HR FHH55 FPC connector with minimum space requirements for a compact design
-
Precise sensor-to-lens mount alignment
-
Standard M3 mounting holes for top and bottom mounting, standard M2 mounting holes for front mounting
-
Industrial performance for embedded vision applications
-
Easy-to-install driver and code examples
- IRIG A & B/IEEE-1344, and NASA 36 inputs standard
- HaveQuick sync option
- Propagation delay compensation
- Zero latency time reads
- Match Time output (P4)
- IRIG B time code output option
- External Event time tag (P4)
- Three user programmable rates
- Ruggedization option
- Multi-pin Front Panel P4 I/O option
- Single-slot low profile 32 bit PCI Express module
- IRIG A, B, NASA 36, 1 PPS sync inputs
- GPS sync option (maintains single-slot)
- HaveQuick sync input option
- Propagation delay correction
- Zero latency time reads
- Match Time output
- IRIG-B time code output (option)
- External Event time tags
- Three user programmable rates
- Supports Windows 8 & 10
- Digitally Signed WHQL Driver
- Designed for Low Profile PCI Express slots.
Brandywine Communications
Brandywine Communications Inc. offers superior products to the time and frequency marketplace. Our mission is to provide the finest equipment coupled with excellent before and after sale service. Our staff of dedicated professionals, based in Tustin, CA, represents over 100 years of collective experience in design, manufacturing and sales of precision time and frequency products. Many of our products are made here in the United States, which allows for quick turnarounds and custom design.
Products from Brandywine Communications range from components such as Oven Controlled Oscillators to complete timing systems like the top of the line High Performance Timing System (HPTS).
Several state-of-the-art time and frequency systems are available from Brandywine. The system product line includes single and dual-redundant models, GPS synchronization and a wide range of oscillator choices: TCXO, OCXO, high-stability OCXO and Rubidium types. GPS choices include both C/A code and SAASM models.
Brandywine also is the premier North American distributor of Oscilloquartz, a subsidiary of ADVA Optical Networking. Oscilloquartz is a premier synchronization supplier for telecommunications for wireline and wireless infrastructures throughout the world. This partnership creates a powerhouse of timing and telecommunications that expand Brandywine's services to their customers in the US and Canada.
We supply several major market segments including: Aerospace, US and Municipal governments, telecommunications, US military, power utilities, financial institutions, test ranges, automotive industry, healthcare and schools.
Brandywine Communications, Inc. is certified as a Small Business Organization with the United States Small Business Administration (SBA’s 8(a) Certification Program) and is registered on the System for Award Management (SAM.gov) website which makes us eligible for all awards or grants specified under this provision.
Contact Details
Brandywine Communications Inc. - Ultra-Precision Time & Frequency
2921 Daimler Street, Santa Ana, CA 92705, USA
Phone: +1-714-755-1050
Email: support@brandywinecomm.com
Embedded
Download Line Card
Document
