Product Finder

Displaying 1 - 14 of 14
Product Results:
AMETEK - RS Series High power AC and DC Power Source

AMETEK - RS Series High power AC and DC Power Source

High Power AC and DC Power Source Programmable AC and DC power for frequency conversion and product test applications...
California Instruments - Asterion AC Series - 1U/2U/4U High Performance Programmable AC and DC Power Sources

California Instruments - Asterion AC Series - 1U/2U/4U High Performance Programmable AC and DC Power Sources

High power density in 1U/2U chassis up to 3kVA. Intuitive touch panel control. iX2™ current doubling technology. Multi-...
California Instruments - BPS Series 30kVA - 180kVA High Power Programmable AC Source

California Instruments - BPS Series 30kVA - 180kVA High Power Programmable AC Source

High Power AC Source Programmable AC power for frequency conversion and product test applications Expandable Power Levels...
California Instruments - Compact i/iX Series 750 VA to 2250 VA, AC/DC Power Source

California Instruments - Compact i/iX Series 750 VA to 2250 VA, AC/DC Power Source

2250 VA of AC Output Power Combines AC/DC source and power analyzer Harmonic analysis of Voltage and Current AC, DC and AC+DC Output Modes Multiple Chassis...
California Instruments - CS Series 3kVA - 18kVA Programmable High Power AC Current Source

California Instruments - CS Series 3kVA - 18kVA Programmable High Power AC Current Source

Precision Current Source : Ideally suited for current protection device testing Single and Three Phase Modes : Built-in phase mode switch makes output...
California Instruments - CSW Series 5550VA - 33300VA High Performance Programmable AC and DC Power Source

California Instruments - CSW Series 5550VA - 33300VA High Performance Programmable AC and DC Power Source

Combination AC and DC Power Source 40-5,000Hz Output Frequencies Arbitrary and Harmonic Waveform Generation Built-In Digital...
California Instruments - CTS Series 3.2 - IEC Compliance Test Systems: 1250-15000VA Programmable AC & DC Immunity Compliance Testing

California Instruments - CTS Series 3.2 - IEC Compliance Test Systems: 1250-15000VA Programmable AC & DC Immunity Compliance Testing

Complete Test Solutions Complete test solutions for emissions and immunity compliance testing of AC and DC powered products...
California Instruments - i-iX Series II 3kVA - 15kVA AC/DC Power Source with a high performance power analyzer

California Instruments - i-iX Series II 3kVA - 15kVA AC/DC Power Source with a high performance power analyzer

3000 VA to 15000 VA of AC Output Power Combines AC/DC source and power analyzer Harmonic analysis of Voltage and Current...
California Instruments - Ls-Lx Series 3kVA - 18kVA Three Phase and Single Phase AC Power Source

California Instruments - Ls-Lx Series 3kVA - 18kVA Three Phase and Single Phase AC Power Source

Key Features Ls Series Backward Compatible with L Series Function and bus compatible with the California Instruments L Series...
California Instruments - MX Compliance Test System

California Instruments - MX Compliance Test System

Direct PC bus access data acquisition system provides the required sampling rate and resolution to meet IEC 61000-4-7 measurement requirements and supports high speed data transfers...
California Instruments - MX Series 15kVA - 135kVA High Output AC/DC Power

California Instruments - MX Series 15kVA - 135kVA High Output AC/DC Power

High Power AC and DC Power Source Programmable AC and DC power for frequency conversion and product test applications...
Elgar - ContinuousWave (CW) Series 800VA - 2500VA, Cost-Effective Low Profile AC Source

Elgar - ContinuousWave (CW) Series 800VA - 2500VA, Cost-Effective Low Profile AC Source

Wide range PFC Input Low THD and AC noise Advanced Measurement Available Field Parallel Configurable Multiple...
Elgar - GUPS Series 1920W Ruggedized Uninterruptible Power Supply

Elgar - GUPS Series 1920W Ruggedized Uninterruptible Power Supply

Ruggedized Wide (Global) Input On-Line Battery Back-Up Transient (Spike) Suppression Surge Suppression...
Elgar - ReFlex Power 875VA AC Power Source Module

Elgar - ReFlex Power 875VA AC Power Source Module

High Power Density (2 VA/cubic inch) Single or multi-phase output Parallel operation 4.8 Crest factor Digital...

  • Dual-input digital oscilloscope and multimeter in a ScopeMeter® test tool
  • Available with a 40 MHz or 20 MHz oscilloscope bandwidth
  • Features Connect-and-View™ trigger simplicity for hands-off operation
  • Includes IntellaSet™ technology to automatically and intelligently adjust numerical readout based on measured signal
  • Provides a dual-input waveform and meter reading recorder for trending data over extended periods


  • True-RMS digital multimeter with the features professional technicians prefer
  • Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording
  • Measures AC and DC voltage to 1000 V
  • Delivers accurate True-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements
  • Safety rated CAT III 1000 V, CAT IV 600 V


  • Accuracy: ≤1/8 in at 30 ft. (≤3 mm @ 10 m)
  • Green beam laser
  • Horizontal fan angle: 180 °
  • Vertical fan angle: 130°
  • Durable pendulum lock
  • IP54 rating to limit dust and water entry for years of operation on the job site.


The Fluke a3000 FC Wireless AC Current Clamp Module is a fully functional true-RMS current clamp meter that wirelessly relays measurements to other Fluke Connect® enabled master units, listed below:
  • Fluke 3000 FC DMM
  • Fluke Ti200/300/400 Infrared Camera
  • PC via optional pc3000 FC Adapter
  • Fluke Connect Mobile app
The Fluke a3000 FC Wireless AC Current Clamp Module has all the essentials for convenient test and measurement troubleshooting:
  • True-RMS AC clamp meter
  • Measure up to 400 A AC
  • Use as a standalone meter or as part of the system
  • Logging function for recording and saving up to 65,000 readings
  • Inrush function


  • Reduce your risk of shock and arc flash by validating the functionality of test tools without placing yourself in a potentially hazardous electrical environment.
  • Prove functionality of the FieldSense measurement on the T6 electrical testers
  • Source both ac and dc steady-state voltage (supplies 240 V dc/ac).
  • Compatible with high impedance multimeters or clamp meters.
  • Voltage is sourced through a central hub designed to test the T6 FieldSense open fork, as well as through recessed contacts that are activated when test probes are inserted to avoid accidental contact
  • Includes TPAK magnetic hanging strap
  • Long battery life—2000 tests per set of four AA batteries (10 second test average)
  • SAFETY RATING: IEC61010-1, IEC61010-2-030