Product Finder

Displaying 1 - 1 of 1
Product Results:
California Instruments - MX Compliance Test System

California Instruments - MX Compliance Test System

Direct PC bus access data acquisition system provides the required sampling rate and resolution to meet IEC 61000-4-7 measurement requirements and supports high speed data transfers...

  • Voltbeat™ technology and continuous self-test – so you always know it's working
  • 20 V to 90 V AC control circuit detection
  • Upon detection, tip glows and beeper sounds
  • CAT IV 1000 V for added protection
  • Expanded range also available: 90 V AC to 1000 V AC
  • Two-year warranty
  • Batteries included
  • On/Off button
  • Audible/Silent


  • Accuracy: ≤1/8 in at 30 ft. (≤3 mm @ 10 m)
  • Green beam laser
  • Horizontal fan angle: 180 °
  • Vertical fan angle: 130°
  • Durable pendulum lock
  • IP54 rating to limit dust and water entry for years of operation on the job site.


  • A unique earth ground tester that performs fast, accurate testing with and without stakes
  • Tests 3- and 4-pole fall-of-potential, and 4-pole soil resistivity (with stakes)
  • Performs selective earth ground rod testing (one clamp + stakes)
  • Performs stakeless earth ground rod testing (two clamps)
  • Features IP56 rating for outdoor use


  • 320 x 240 resolution
  • 2 meter drop test
  • LaserSharp™ Auto Focus
  • Manual or automatic focus
  • Measure up to 650 °C


  • Best-in-class accuracy of 0.02% full scale for each 2700G Reference Gauge
  • Expand lower range capability with additional 2700G Reference Gauges
  • Adaptors to provide hand tight connection to common NPT, BSP, and metric fitting types
  • Included reference gauges are battery operated and capable of using line power too
  • Portable with a sturdy carrying case
  • Best-in-class accuracy of 0.02% full scale for each 2700G Reference Gauge
  • Expand lower range capability with additional 2700G Reference Gauges
  • Adaptors to provide hand tight connection to common NPT, BSP, and metric fitting types
  • Included reference gauges are battery operated and capable of using line power too
  • Portable with a sturdy carrying case
P5510-2700G specific features:
  • Built-in pump for generating both vacuum and positive pressure
  • Pressure range 0 to 300 psi 2 MPa (300 psi)
  • Vacuum range 0 to 27 inHg (915 mbar)
  • Up to three 2700G Reference Pressure gauges
  • Fine needle vent valve for small adjustment and venting of pressure
  • No external bottle
  • Manually operated
P5513-2700G specific features
  • Pressure range 0 to 3000 psi (210 bar)
  • Vacuum range 0 to 24 inHg (800 mbar)
  • Up to three 2700G Reference Pressure gauges
  • Built-in screw press for fine pressure adjustments
  • Clean testing of process critical instrumentation
  • Requires pressure source (i.e. nitrogen bottle) for operation