Product Finder

Displaying 1 - 2 of 2
Product Results:
SunAR RF Motion - Remote Controlled-Test Platform

SunAR RF Motion - Remote Controlled-Test Platform

Automated wireless throughput testing Options: Rechargeable battery power Wireless control Gigabit...
SunAR RF Motion - SC110V - System Controllers

SunAR RF Motion - SC110V - System Controllers

.01 cm or degree resolution TTL Triggering  

  • Precise laser technology for more accurate and repeatable measurements
    • Temperature accuracy of up to ± 1℃ or ± 1% of reading whichever is greater with 20:1 distance to spot ratio
  • Flashlight and large, easy-to-read backlit LCD display for easy viewing even in dark environment
  • IP54 rated for extra protection against airborne contaminants
  • Get your tool to work when you can't - set time and desired interval between measurements and Auto Capture will capture spot temperatures unattended
  • 99 data point logging
  • 30 hour battery life so your tool can perform as long as you need it to
  • Displays the minimum, maximum or average temperature, or the difference between two measurements
  • Hi and Lo alarms for rapid display of measurements outside set limits
  • Small and lightweight design fits easily into your tool box
  • Powered by one (1) AA alkaline battery


  • True-RMS accuracy with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-Average recording give you the results you need.
  • Fluke-i400 AC 400A Current Clamp turns the 289 into a clamp meter.
  • Safety rated CAT III 1000 V, CAT IV 600 V meter to get you home safely from the job.


  • 640 x 480 resolution infrared camera with advanced focus and a large 5.6 inch high resolution LCD screen
  • Features 32x on-camera digital zoom to allow you to get close up shots from a safe distance
  • Offers multiple image transfer protocols
  • Provides the sharpest ever IR-Fusion® images with an 8 MP visible light camera
  • Subject to Export Control


Installs and grounds in less than 5 minutes
Save time with quick and easy installation with the CV Series – 5 minutes or less.
  • One technician
  • One hole with standard Greenlee® punch
  • Panel door does not need to be removed
  • Grounds instantly to metal enclosure with patent-pending AutoGround™ process
  • Maintains panel arc test ratings up to 63kA when properly installed
Work more efficiently with Fluke ClirVu® CV201 50 mm (2 in) Infrared Windows
  • NFPA 70E processes significantly reduced due to less work permit requirements
  • Faster and more comfortable inspections because full PPE is often not required
  • Reduce the risk of arc-flash and electrocution, increase the safety of your personnel and reduce the time and cost of preventive maintenance
  • CV201 is Torture Tested™ to the highest arc blast test ratings IEEE C37.20.7: 63 kA Arc tested at KEMA, UL 50/50E/50V, UL1558, IEC60529-1: IP67, IEC 60068, NEMA 4/12, CSA C22.2 NO. 14-13:2012, and CE
  • Convenience of both quick turn or security keyed access


Fluke 789 Temperature Kit features:

  • Unique new wireless measurement logging capability
  • Temperature measurement from -200 °C to 1372 °C using the t3000 FC
  • 24 V Loop power supply
  • HART mode setting with loop power (adds 250 ohm resistor)
  • 100% larger dual display
  • 1200 ohm drive capability on mA source
  • Enhanced backlight with two brightness settings
  • 0% to 100% mA Span Check buttons to toggle between 4 and 20 mA
  • Infrared I/O serial port compatible with
  • FlukeView® Forms Software Version 2.1
  • Externally accessible fuses for easy replacement

These 787 features are also included in the 789:

  • DMM designed to meet 1000 volt IEC 1010 CAT III standards
  • Precision 1000 V, 440 mA True-RMS digital multimeter
  • Frequency measurement to 20 kHz
  • Min/Max/Average/Hold/Relative modes
  • Diode test and continuity beeper
  • Simultaneous mA and% of scale readout
  • 20 mA DC current source/loop calibrator/ simulator
  • Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
  • Externally accessible battery for easy battery changes