Partnering with Leading Manufacturers of Test Instrumentation, Imaging and Embedded Products
- Wireless, compact sensors for a scalable remote monitoring solution
- Alarms based on user-defined or Fluke Overall Vibration Severity (FOVS) scale thresholds
- Capture rate: One data point every 120 seconds
- Visualize data with software trending and graphing
- Remotely view real-time and historical triaxial vibration, surface temperature data
- Choose from 1- or 3-year software licenses (where applicable)
- Battery life: 3 years (varies by usage)
-
Size:
- Sensor - (H x W) 2.42 in. x 0.95 in.
- Gateway - (H x W x L) 2.26 in. x 1.55 in. x 1.82 in.
- Frequency response range: 10 to 1,000 Hz
- Bluetooth type: Low Energy 4.1
- IP Rating: IP 67
A powerful, complete hydraulic pressure calibration system to cover a wide workload
Fluke Calibration improved the hydraulic pressure calibration process with the introduction of E-DWT-H electronic deadweight tester. E-DWT-H is an electronic calibrator designed to deliver traditional hydraulic deadweight tester performance with digital measurement features and convenience. Some improvements offered by E-DWT-H include:
- No weights to load and unload, transport or send out for calibration
- Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature
- No piston-cylinder changes
- No significant sensitivity to level or vibration
- Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration
- Operates in any unit of measure, switching easily from one unit to the next
- Best-in-class accuracy of 0.02% full scale for each 2700G Reference Gauge
- Expand lower range capability with additional 2700G Reference Gauges
- Adaptors to provide hand tight connection to common NPT, BSP, and metric fitting types
- Included reference gauges are battery operated and capable of using line power too
- Portable with a sturdy carrying case
- Best-in-class accuracy of 0.02% full scale for each 2700G Reference Gauge
- Expand lower range capability with additional 2700G Reference Gauges
- Adaptors to provide hand tight connection to common NPT, BSP, and metric fitting types
- Included reference gauges are battery operated and capable of using line power too
- Portable with a sturdy carrying case
- Built-in pump for generating both vacuum and positive pressure
- Pressure range 0 to 300 psi 2 MPa (300 psi)
- Vacuum range 0 to 27 inHg (915 mbar)
- Up to three 2700G Reference Pressure gauges
- Fine needle vent valve for small adjustment and venting of pressure
- No external bottle
- Manually operated
- Pressure range 0 to 3000 psi (210 bar)
- Vacuum range 0 to 24 inHg (800 mbar)
- Up to three 2700G Reference Pressure gauges
- Built-in screw press for fine pressure adjustments
- Clean testing of process critical instrumentation
- Requires pressure source (i.e. nitrogen bottle) for operation
- 200 A AC and DC current measurement with detachable jaw
- 600 VAC and DC voltage measurement
- Detachable jaw makes accessing wires and viewing the display easier
- Built in flashlight/torch allows for easy illumination and identification of wires
- CAT III 600 V
- Compact design fits in your hand and can be used while wearing protective equipment
- State of the art signal processing allows for use in noisy electrical environments while providing stable readings
- Large, easy to read, backlight display automatically sets the correct measurement range so you do not need to change switch positions while taking a measurement
- Three-year warranty
- Soft carrying case
- Lightweight, portable, and fast
- Built-in two-channel readout for PRT, RTD, thermocouple, 4-20 mA current
- True reference thermometry with accuracy to ±0.01 °C
- On-board automation and documentation
- Metrology performance in accuracy, stability, uniformity, and loading
