RFSoC / FPGA

Products

Abaco - daq8580 Rugged Multichannel FMV Compression Appliance for SWaP Constrained Processing, Server, and Storage Applications
  • Real-time multi-channel encoding and decoding for transmission of video over IP data link
  • Rugged conduction cooled form factor
  • ITU-T H.264 AVC Codec (MPEG4 Part 10) Main profile with configurable parameters
  • 1 to 2 channels of encoded HD video up to 1600x1200@30fps
  • 1 to 4 channels of encoded Standard definition video supporting NTSC/ PAL
  • MPEG2-TS multiplexing with audio and metadata encapsulation
  • Data rates from 128Kbps to 20Mbps
  • Low Latency <70ms
  • Input sources supported:
    • HD/SD SDI (SMPTE259M/292M), HDMI, DVI, RS170(NTSC/PAL), HDTV(720p60/1080p30), CVBS, S-Video, Component, RGB, STANAG, Cameralink
  • Metadata insertion via Ethernet, or SDI MISB 605.2
  • KLV metadata insertion
  • Stereo audio inputs and outputs with synchronization to video
  • Output video formats supported:
    • HD/SD SDI (SMPTE 259M/292M), SDTV and HDTV CVBS/S-Video/ Component, RGB, DVI, HDMI
  • Configuration and control through Ethernet Webserver or programmable API
  • Support for direct record/playback from NAS data storage
  • Video compression SDK/API for fast integration into enterprise applications
  • Fully rugged and deployable enclosure

Abaco - Fixed Point FFT/IFFT IP Core
Abaco Systems' fixed point FFT cores are the most efficient and fastest available in the FPGA world. With a revolutionary architecture for efficient memory usage and balanced use of arithmetic and logic resources, we offer complete FFT solutions with any input resolution up to 2Gsps. Whether you require a forward FFT, Inverse FFT, a 2D FFT, correlation or any algorithm efficiently performed with a Fourier transform, our technology will offer you the best solution for a cost-effective implementation.

Abaco - FlexVPX Backplane 2 or 3-Slot Configurable Backplanes
VPB601
  • 2-slots
  • 1” pitch
  • PCIe switch with 5 fat pipes
  • VITA 48.2 compliant
  • RTM connector available for cable connections to other backplanes
  • VITA 67.2 I/O for analog connections
VPB602
  • 2-slots
  • 1” pitch
  • 16-lane PCIe Gen 2 connection between slots
  • PCIe switch with 5 fat pipes
  • VITA 48.2 compliant
  • RTM connector available for cable connections to other backplanes
VPB603
  • 3-slots
  • 16-lane PCIe Gen 2 connection between slots
  • PCIe switch with 5 fat pipes
  • 12-lane Gigabit connections between slot 1 and 2
  • VITA48.2 compliant
  • RTM connector available for cable connections to other backplanes
  • VITA 67.2 I/O for analog connections on slots 1 and 2
  • RTM connector available for cable connections to other backplanes

Abaco - Floating Point FFT, IEEE-754 Floating Point FFT/IFFT IP Core
Abaco Systems' Floating Point FFT core is the most flexible IEEE-754 compliant FFT core available in the FPGA world. Designed for high performance programmable devices from Xilinx and Altera, this core performs Fast Fourier Transforms ranging from 256 points to 64M points and is ideal for high precision spectral analysis, radar and video processing applications. Download our bit-true model for 1D and 2D FFT.

Abaco - FMC116 high pin count FMC ADC, 16-channel 14-bit ADC - 125 Msps
  • 16 channel 14-bit 125 Msps A/D conversion
  • Conduction cooled compatible
  • ANSI/VITA 57.1-2010 compliant
  • Based on LTC2175-14
  • 1.5V to 3.3V VADJ operation
  • Single ended DC coupled inputs
  • Programmable DC offset correction
  • Flexible clock tree enables
    • External or Internal clock
    • External clock output
    • External or internal reference
  • HPC (high-pin count) compatible
  • Samtec QSE front panel connector mates with QTE series and EQCD and EQRF cable assemblies
  • Optional SSMC/MMCX clock and trigger IO on the back of the FMC (consult factory)
  • MIL-I-46058c conformal coating (optional)

Abaco - FMC120 Four Channel 16-Bit A/D up to 1.0 Gsps. Four Channel 16-Bit D/A up to 1.25 Gsps
  • 4-Channels 16-bit 1.00 Gsps A/D
    • 1.5 GHz Analog Bandwidth
    • Usable in the 3rd Nyquist Zone
  • 4-Channels 16-bit up to 1.25 Gsps D/A
    • 2.8 GSPS Update Rate
    • Onboard 48-Bit NCO for Flexible Signal Placement
  • VITA 57.1 HPC compliant
  • Conduction Cooled – Standard Option
  • DC coupled analog input.
  • Internal clock or external clock
  • Mil-I-46058c Conformal Coating Compliant (optional)
  • HPC – High Pin Count Connector
  • 10 front panel SSMC or MMCX connectors
  • 2Kbit EEPROM (M24C02- WDW) accessible from the Host via I2C bus

Abaco - FMC126 high pin count FMC ADC, 4-channel 10-bit ADC - 5 Gsps
  • Quad - Dual - Single 10-Bit Channel Operation
    • 4-Channel 1.25 Gsps A/D conversion Mode
    • 2-Channel 2.50 Gsps A/D conversion Mode
    • 1-Channel 5.00 Gsps A/D conversion Mode
  • VITA 57.1-2010 compliant
  • 1.5V to 3.3V VADJ operation
  • Conduction Cooled
  • 1.25Gsps DDR LVDS outputs
  • Coax front panel inputs on SSMC connectors
  • Single ended AC-coupled analog inputs
  • Flexible clock tree enables
    • internal clock
    • external clock
  • cascading multiple boards (optional)
  • HPC (high-pin count) compatible
  • Mil-I-46058c Conformal Coating Compliant (optional)

Abaco - FMC134 FPGA Mezzanine Card, Direct RF conversion module
  • Two operational modes
    • 4 channels, 12-bit, 3.2GSPS data rate
    • 2 channels, 12-bit, 6.4GSPS data rate
  • VITA 57.4 HSPC FMC+ site required
  • 16 JESD204B lanes at 12.8GBPS
  • 8 JESD204B lanes passed to board topside for FMC stacking
  • Optional FMC+e connection for additional stacked serial lanes
  • Conduction cooled configuration available
  • AC-coupled analog input
  • 9 front panel MMCX connectors
  • Internal or external clock
  • MIL-I-46058c conformal coating (optional)
  • 2Kbit EEPROM (M24C02-WDW) accessible from the host via I2C bus
  • Full-featured board support package.
    • Open source VHDL reference design
    • Open source C/C++ reference examples. Windows® and Linux® support.
    • JESD204B core included
    • Simplified IP integration with StellarIP

Abaco - FMC150 Dual 14-bit A/D & Dual 16-bit D/A
  • Quad Channel Operation
    • 2-channels 14-bit A/D up to 250 Msps
    • 2-channels 16-bit D/A up to 800 Msps
  • VITA 57.1-2010 compliant
  • Conduction Cooled - Standard Option
  • Single ended AC-coupled analog signals
  • 6 MMCX/SSMC connectors available from the front panel
  • Clock Source, Sampling Frequency, and Calibration settings through SPI communication busses
  • Flexible clock tree enables:
    • internal clock source (VCXO)
    • external sampling or reference clock
  • Power-down modes to switch off unused functions for system power savings
  • Mil-I-46058c Conformal Coating Compliant (optional)
  • LPC (low-pin count) compatible
  • LVDS and 1.65V to 3.3V IO signalling

Abaco - FMC160 FMC VITA 57.1 Compliant, Single channel 12-bit 3.6Gsps A/D and 14-bit 5.7Gsps D/A
  • One ADC12D1800: Single channel 12-bit 3.6Gsps
  • One AD9129: Single channel 14-bit D/A up to 5.7 Gsps (2.85Gsps without 1:2 interpolation) - LVDS
  • VITA 57.1-2010 compliant
  • Conduction Cooled - Standard Option
  • Single ended AC-coupled analog signals
  • 6 MMCX/SSMC connectors available from the front panel
  • 4 LVTTL signals available from an HDMI connector on the front panel
  • 4 Xilinx MGT available from an HDMI connector on the front panel
  • Clock Source, Sampling Frequency through SPI communication busses
  • Flexible clock tree enables:
    • on board VCO: 2200MHz - 4400MHz
    • external reference clock
    • external sampling clock
  • Power-down modes to switch off unused functions for system power savings
  • Mil-I-46058c Conformal Coating Compliant (optional)
  • HPC (high-pin count) compatible
  • LVDS IO signaling X

Abaco - FMC165 FPGA Mezzanine Card, Dual Channel ADC and Single Channel DAC
  • ADC32RF44 ADC: dual-channel 14-bit up to 2.6 GSPS with DDC (or 14-bit @ 2.5 GSPS with full data rate)
  • AD9129 DAC: single-channel 14-bit up to 5.2 GSPS (2.6 GSPS data rate)
  • RF input bandwidth up to 3.2 GHz and output up to 2.6 GHz in x2 interpolation mode
  • JESD204B (A/D), LVDS (D/A) FPGA data buses
  • Single-ended AC-coupled analog signals
  • 6 SSMB connectors available from the front panel
  • Clock source, sampling frequency and calibration through I2C communication
  • buses
  • Flexible clock tree enables
    • on board VCO - 1.5 to 2.6 GHz
    • external reference clock
    • external sampling clock
  • Multi-board synchronization capable
  • ANSI/VITA 57.1 compliant
  • HPC (high pin count) compatible
  • Conduction-cooled configuration available on Abaco FPGA carrier cards

Abaco - FMC168 low pin count FMC, 8-channel 16-bit ADC - 250 Msps
  • Eight channel 16-bit 250MSPS A/D conversion
  • Available as air cooled and conduction cooled
  • VITA 57.1-2010 compliant
  • Based on TI ADS42LB69
  • Coaxial front panel inputs on SSMC connectors
  • Single ended AC- or DC-coupled analog input
  • Flexible clock tree enables:
    • internal clock
    • internal clock locked to an external reference
    • external clock
    • external sync / 1PPS
  • LPC (low-pin count) compatible
  • Mil-I-46058c Conformal Coating Compliant - Optional

Abaco - FMC172 FPGA Mezzanine Card, Wideband Low Latency FMC Module
  • Single-channel, 10-bit A/D up to 6.4GSPS
  • Single-channel, 10-bit D/A up to 6.0GSPS
  • VITA 57.1 FMC compliant
  • Conduction-cooled version available (Deviation from Standard)
  • AC-coupled analog signals
  • 5 SSMC front panel connectors
  • Sampling frequency and calibration through I2C communication
  • Flexible clock tree enables:
    • Internal clock source
    • External reference clock
  • Trigger signal to enable multiboard synchronization
  • Power-down modes to switch off unused functions for system power savings
  • MIL-I-46058c Conformal Coating compliant (optional)

Abaco - FMC176 FMC VITA 57.1 Compliant, Quad 250Msps A/D - Dual 5.6Gsps D/A @ 14-bit
  • Two AD9250: 4-channel 14-bit A/D up to 250 Msps - JESD204B
  • Two AD9129: 2-channel 14-bit D/A up to 5.6 Gsps (2.8Gsps without 2:1 interpolation) - LVDS
  • VITA 57.1-2010 compliant
  • Conduction Cooled - Standard Option
  • Single ended AC-coupled analog signals
  • 10 MMCX/SSMC connectors available from the front panel
  • Clock Source, Sampling Frequency, and Calibration through a SPI communication busses
  • Flexible clock tree enables:
    • on board VCO: 2300MHz - 2650MHz
    • external reference clock
    • external sampling clock
  • Power-down modes to switch off unused functions for system power savings
  • Mil-I-46058c Conformal Coating Compliant (optional)
  • HPC (high-pin count) compatible
  • LVDS IO signaling

Abaco - FMC216 high pin count FMC DAC, 16-channel 16-bit DAC – 312.5 Msps
  • 16 channel 16-bit 312.5Msps D/A conversion
  • Conduction cooled compatible
  • ANSI/VITA 57.1-2010 compliant
  • Based on DAC39J84
  • 1.65V to 3.3V VADJ operation
  • Single ended DC coupled outputs
  • Programmable DC offset correction
  • Flexible clock tree enables
    • External or Internal clock
    • External clock output
    • External or internal reference
  • HPC (High-Pin Count) 400 pins connector
  • Samtec QSE front panel connector mates with QTE series and EQCD and EQRF cable assemblies with SMA connectors
  • MIL-I-46058c conformal coating (optional)

Abaco - FMC407 FPGA Mezzanine Card, Clock and Trigger Distribution FMC
  • External clock input and onboard VCO
  • External reference input and onboard reference (30.72MHz)
  • Eight synchronized clock outputs
    • 34.375MHz-4.4GHz
  • Eight synchronized trigger or 1PPS outputs
  • Onboard GPS receiver for accurate data time stamping
  • Fully controllable from FMC connector
  • VITA 57.1 compliant
  • LPC (low-pin count) compatible
  • Conformal Coating (optional)
  • Conduction cooled (optional)
  • A breakout cable on the front panel makes all clock and trigger signals available on individual SMA sockets.

Abaco - FMC424 FPGA Mezzanine Card, Stackable QSFP+ Module
  • Dual QSFP+
  • 10.3125 Gbps per transceiver, 82.5 Gbps total data rate
  • GBT FMC connector signaling
  • ANSI/VITA 57.1-2010 electrically compliant
  • 1.5V to 3.3V VADJ operation
  • High Pin Count (HPC) connector
  • MIL-I-46058c conformal coating (optional)

Abaco - FPGA DSP Board Support Package, Tools to get your FPGA design off the ground as quickly as possible
Our Board Support Package helps customers get their hardware implementation underway as quickly as possible by providing reference designs, the Stellar IP FPGA development tool, and the 4FM GUI user interface for controlling and monitoring the hardware, as well as other supporting elements. The package comes with three main components: host tools, FPGA tools and diagnostic tools.

Abaco - ICS-1572A 2-Channel, 250 MHz 16-bit ADC, 2-Channel 500 MHz 16-bit DAC XMC Module
  • 2 Transformer-coupled Analog Inputs, 16 bits, Fs ≤250 MHz per channel
  • 2 Transformer-coupled Analog Outputs, 16 bits, Fs ≤500 MHz per channel
  • Xilinx Virtex-6 LX240T User Programmable FPGA standard, other devices available as an option
  • PCI-e x8 Master/Target Burst Mode DMA capable
  • VxWorks, Linux and Microsoft® Windows® software drivers

Abaco - ICS-8580 2-Channel High-Definition or 4-Channel Standard Definition H.264 Video encoder/decoder
  • Real-time multi-channel encoding and decoding for transmission of video over IP data link
  • ITU-T H.264 AVC Codec (MPEG4 Part 10) Main Profile with configurable codec parameters
  • MPEG2 TS multiplexing with audio and metadata encapsulation
  • Data rates from 512kbps to 20Mbps <60ms Latency
  • 1 to 2 channels of HD encoded video up to 1600 X 1200@30fps
  • 1 to 4 channels of Standard Definition video
  • Input sources supported: HD/SD SDI (SMPTE259M/292M), NTSC/ PAL, HDTV (1080p/720p), CVBS, S-Video, Component
  • Support for Base Cameralink input devices
  • Stereo Audio I/O with synchronization to video
  • Metadata Ingest through Ethernet and PCIe
  • Output video formats supported: HD/SD SDI, SDTV, HDTV, CVBS, S-Video, Component
  • PCIe Gen1 x4 Data link for Raw/ Compressed Video Transport, Metadata and H/W configuration
  • Configuration control through Ethernet/PCIe Webserver or programmable API
  • Support for direct record/playback from NAS data storage
  • Video compression SDK/API for fast integration into enterprise applications
  • Multiple OS support for API and device drivers

Abaco - PC720 Kintex™-7 FPGA Card, PCI Express 8 lanes Gen2 with two FMC sites
  • Kintex-7 160T, 325T, 410T
  • PCIe Gen2 x8/4-lane, PCIe Gen3 x4 (softcore)
  • 1GB DDR3 SDRAM
  • 1x FMC HPC available on front panel (VITA 57.1)
  • 1x FMC LPC or 4-channel SFP FMC (FMC404) available on front panel on the secondary side (VITA 57.1)
  • Micro SD Flash (32GB)

Abaco - PC820 UltraScale FPGA Card, PCIe Gen3 with 1x FMC+ Expansion Site
  • Kintex UltraScale (XCKU085, XCKU095, XCKU115 or Virtex UltraScale (XCVU080, XCVU095, XCVU125))
  • PCIe Gen3 x8
  • 1x FMC+ Site – High Serial Pin Count (HSPC)
  • DDR4-2133 SDRAM SO-DIMM
  • 1Gb FPGA configuration Flash
  • 256Mb Serial Flash
  • Single-lane SFP+ interface
  • Bidirectional x8 FireFly connection (optional)
  • CPLD on board
  • Standalone operation (optional)

Abaco - PC821 UltraScale PCIe FPGA Card, PCIe Gen3 with 1xFMC+ and 1xFMC Expansion Site
  • Kintex UltraScale (XCKU085, XCKU095, XCKU115) or Virtex UltraScale (XCVU080, XCVU095, XCVU125)
  • PCIe Gen3 x8
  • 1x Primary FMC+ HSPC (front)
  • 1x Secondary FMC HPC (rear)
  • DDR4-2133 SDRAM SO-DIMM
  • 1Gb FPGA configuration Flash
  • 256Mb Serial Flash
  • Single-lane SFP+ interface
  • Bidirectional x8 FireFly connection (optional)
  • CPLD on board

Abaco - PCIe490 8-slot PCI Express Gen 2 FPGA I/O Expansion Chassis
  • 8-Slot PCI Express Gen 2
  • PCIe x16 Host Datalink
  • 750W ATX Power Supply
  • x4 PCIe Lanes Per Slot
  • Rack Mount Ready
  • Isolated Temperature Environment
  • Chassis Daisy Chain Enabled

Pages