• Different optics available (line, dot, cross)
• Power supply via AA battery or rechargeable battery (not included)
• Convenient ON/OFF button
• Robust metal housing

The ZAT is a battery-powered laser module designed for flexible positioning tasks in industrial environments. With its rugged metal housing and integrated power supply using either AA batteries or rechargeable cells, it operates independently of external power sources. A push button at the rear of the housing enables simple on/off operation for quick handling. The ZAT is particularly well-suited for woodworking, stone processing, and metalworking, and can be easily retrofitted to machines such as miter saws, dowel drilling machines, or tile cutters. Offering mobility and reliability in one, it provides an effective solution for precise alignment tasks wherever flexibility is needed.

• IRIG A & B/IEEE-1344, and NASA 36 inputs standard 
• HaveQuick sync option 
• Propagation delay compensation 
• Zero latency time reads 
• Match Time output (P4) 
• IRIG B time code output option 
• External Event time tag (P4) 
• Three user programmable rates 
• Ruggedization option 
• Multi-pin Front Panel P4 I/O option

• Modular 6.5 digit DMMs for the EX1200 mainframes 
• Tightly integrated into mainframes, allowing high-speed, synchronized scanning measurements without the need for external cabling. 
• Input can be routed directly to the DMM or through an internal analog bus on the backplane. 
• Super fast scanning with no processor intervention required 
• Scanning configuration can be saved in the DMM’s non-volatile memory allowing quick recall of saved states 
• Integrating ADC for with adjustable integration time depending on the level of accuracy required. 
• “True RMS” AC readings 
• Frequency and temperature measurements

• The I3 and I3S Inline Controllers provide overdrive strobe and continuous operation to lights from a small package when larger, more versatile external controllers are not necessary. 
• Switching between continuous-on, gating on/off and strobe overdrive is seamless. The I3 and I3S employ Ai’s exclusive Adaptive OverdriveTM that optimizes strobe power regardless of input Pulse Width. 
• The I3 is a default-on device on power-up, whereas the I3S is a default-off device, requiring a trigger to illuminate. 
• All ICS models employ reverse input polarity protection. 
• Provides continuous-on and DC gating on/off control as well as 0-10 volt analog dimming. 30 uSec response time. 
• A wash down version of all ICS drivers is provided automatically with any wash down light to which it is attached. 
• 0 – 100% Intensity Control with optional DCS-MP, purchased separately, will provide manual intensity control via an external potentiometer.

• IRIG’s A and B and NASA 36 time code inputs 
• +3.3V or +5V signaling 
• 1PPS Sync input 
• External Event (Time Tag) input 
• Three programmable pulse rate outputs 
• Match Time output 
• Industrial Temperature Range option 
• Optional on-board GPS option 
• Optional HaveQuick input/output 
• Optional IRIG B time code output

Mechanic high resistance decade with RS232 remote control for voltages up to 5 kV. Internal battery for up to 3 hours of on site calibration.

• 12 GΩ and 5 kVdc limits
• Voltage limit indication
• Battery-powered
• Remote control via RS232 bus

• 2-port VNA with frequency options from 1 MHz to 8 GHz / 20 GHz / 43.5 GHz (options for 20, 50, and 100 meters)
• Extend remote ports 100 meters apart with PhaseLync synchronization
• Small and lightweight ports enable direct connection to DUT eliminating long cable runs
• Guaranteed performance to 43.5 GHz with Extended-K™ ports
• PC control takes advantage of external computer processing power and functionality
• No on-board data storage makes use in secure applications more convenient
• Common ShockLine control software delivers powerful debug and test capabilities
• PhaseLync control module MN25132A

• Four operating modes: – CC, CV, CR, CP.
• Static, Dynamic and Sequence mode support.
• Built in Application Functions - Short Circuit Test, Battery Test Mode, CR-LED Mode, OCP and OPP Test.
• Provides a load of up to 300 Watts.
• Programmable and analog external control.

Sensors acquisition and recording for troubleshooting is a cumbersome process in a fully furnished or operational aircraft, especially when time and low footprint are key drivers. 

This is no more the case with Safran new solution µMA: 

• its cylindrical form factor allows easy installation by just requiring a standard clamp used to mount tubes 
• its battery power supply and its wireless connectivity removes the need of installing any harness in the aircraft. 

All these capabilities are available while providing high measuring performance and harsh environment ruggedized in line with Safran standard solutions.