Teledyne LeCroy - MIPI DigRF v4 Decode Software
The DigRF 3G and v4 decode are the ideal tools for powerful system level protocol debug as well as problem solving for signal quality issues. The DigRF decodes add a unique set of tools to your oscilloscope, simplifying how you design and debug MIPI digital RF systems.
The Most Intuitive Decode
MIPI DigRF decodes use color-coded overlays on various sections of the protocol for an easy-to-understand visual display. Depending on the time base or the amount of zoom, the decode information is condensed or expanded to better assist in understanding events during short or long acquisitions.
The Single Tool Enhances Productivity
The MIPI DigRF 3G decode solutions concentrates all your information in one place. Viewing the application layer of DigRF 3G and v4 signals on top of the physical layer provides a unique view that bus analyzers cannot. Measurements such IVRms, QVRms, PIQ, IDC, and QDC can be applied to the DigRF v4 signals for greater understanding.
Complete Compliance and Debug
For a complete MIPI toolset, Teledyne LeCroy offers a D-PHY compliance and decode package. QPHY-MIPI-DPHY provides automated compliance testing to the MIPI Alliance specification for D-PHY version 1.00.00. The D-PHY decode solution provides a simple and powerful debug solution for D-PHY, CSI-2 and DSI signals.
|
Compatibility |
|
|---|---|
|
Products |
|---|
More Product Information
- 10 GigE Ethernet port & hardware
- Industry’s smallest 67M 10GigE Vision camera
- Simplified set-up with field proven Sapera LT software featuring CamExpert
- Engineered to accommodate industrial environment with a ruggedized screw mount RJ-45 connector
The brand new Linea2 family takes your system to the new level with impressive performance and value, offering 5x the bandwidth of our Linea family with a 5GigE interface. The Linea2 line scan cameras are powered by our very own Teledyne quadlinear sensor, extending detection capability using RGB + NIR multispectral imaging technology.
-
Teledyne e2v Sapphire CMOS sensor
-
Switchable shutter modes
-
Power over Ethernet
-
60 fps at full resolution
-
Monochrome (G-192B) and color (G-192C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter
-
PYTHON 480 CMOS sensor
-
ALVIUM image processing
-
MIPI CSI-2 interface
-
Various hardware options
-
Monochrome (1500 C-050m) and color (1500 C-050c) models
-
ALVIUM® Technology for on-board image processing
-
MIPI CSI-2 interface with up to 4 lanes
-
Platform concept that enables the operation of different Alvium camera models with a common software
-
Hirose HR FHH55 FPC connector with minimum space requirements for a compact design
-
Precise sensor-to-lens mount alignment
-
Standard M3 mounting holes for top and bottom mounting, standard M2 mounting holes for front mounting
-
Industrial performance for embedded vision applications
-
Easy-to-install driver and code examples
- All Digital IF technology
- 10.1” WVGA (1024 x 600) Display
- Frequency range from 9 KHz up to 3.2 GHz
- -161 dBm/Hz Displayed Average Noise Level (Typ)
- -98 dBc/Hz @ 10 khz Offset Phase Noise (Typ)
- Total Amplitude Accuracy < 0.7 dB
- 1 Hz Minimum Resolution Bandwidth (RBW)
- Comes with Preamplifier
- Four operating modes: – CC, CV, CR, CP.
- Static, Dynamic and Sequence mode support.
- Built in Application Functions - Short Circuit Test, Battery Test Mode, CR-LED Mode, OCP and OPP Test.
- Provides a load of up to 300 Watts.
- Programmable and analog external control.
- Long cable lengths at maximum image acquisition rates
- Data forwarding rate for distributed image processing
- Fully supported by Sapera Vision Software SDKs
- Bandwidth models from 8 GHz to 30 GHz
- Low loading and high impedance for minimal signal disturbance
- Wide variety of tips:
- Standard and high-sensitivity 30 GHz solder-in tips
- High-temperature solder-in tip with 1-meter lead
- QuickLink adapter for mixed-signal probing
- Handheld browser tip
- Tips for direct oscilloscope connection to CrossSync PHY protocol analyzer interposers
- Built-in tip identification for simple setup and precise signal reproduction
- Ideal for debug and validation of:
- PCIe 1.0 to 6.0
- DDR3/LPDDR3
- DDR4/LPDDR4/LPDDR4X
- DDR5
- Other high-speed serial interfaces
With the ProBus interface, the ZD500, 1000, and 1500 becomes an integral part of the oscilloscope. All probe gain and offset controls are transparent to the user, making it easier to probe the circuit without concern for which gain setting to choose. When used with a LeCroy digital oscilloscope, no external power supply is required.
Teledyne LeCroy
Website
12bit MSO's 40 Mhz to 100 GHz, Probes, Series Network & Logic Analyzers
