Teledyne LeCroy - High Voltage Passive Probes
- 2000 Vrms input
- 6000 Vpeak transients
- Up to 500 MHz bandwidth
- Ideal for Surge/EFT testing
High voltage single-ended passive probes are suitable for a wide range of applications where ground-referenced high-voltage measurements must be made safely and accurately. There is also a sense pin to automatically configure the oscilloscope for use with the probe.
The PPE6KV-A and HVP120 can handle up to 6000 Vpeak transient overvoltages and are designed for probing up to 2000 Vrms and 1000 Vrms respectively. Fast rise times, excellent frequency response, and a variety of standard accessories make these probes safe and ideal for high voltage measurement applications
More Product Information
- The Direct PC bus access data acquisition system provides the required sampling rate and resolution to meet IEC 61000-4-7 measurement requirements and supports high-speed data transfers.
- PC-based Harmonic and Flicker test software provides real-time full-color data display updates and continuous PASS/FAIL monitoring.
- Automatic calculation of the maximum permissible system impedance Zsys, using the Zref and measured Flicker parameters, as required per EN/IEC 61000-3-11.
- Intuitive operating software provides IEC test setup, data analysis, display, with test reports in and MS Word format.
- High resolution, no gap acquisition data storage to ensure that all data can be streamed to disk (in ASCII format if needed) for later review and replay of the actual test.
- Single Step and Fast playback mode of test results.
Linea SWIR features a cutting-edge InGaAs sensor in a compact package that is suitable for a wide variety of applications. With exceptional responsivity and low noise, this camera allows customers to see their products like never before. Linea SWIR is available as a 1k resolution camera with highly responsive 12.5 µm pixels, or a 512 resolution camera with larger 25 µm pixels.
HYPERLABS offers high-performance, ultra-broadband DC Feeders with low insertion loss throughout the specified bandwidth range.
- 2, 4 and 8 channel configurations
- 16-bit vertical resolution
- Sample Rate up to 12.32 GS/s with RF mode
- 16-bit vertical resolution.
- 4 Gpts waveform memory per channel
- Up to 5 Vpp Output Voltage and ±2.5 V Baseline Offset 50 Ohm
- Highest resolution – 12 bits all the time
- More channels, flexibility – 8 analog and 16 digital channels
- Longest Memory – 5 Gpt records with simple navigation – no compromise
- View 16 channels on one display with OscilloSYNC™
- Powerful, deep toolbox enables and simplifies complex analysis
- MAUI with OneTouch user interface for intuitive and efficient operation
- Zone Trigger – Simple Triggering for Complex Signals
- HD4096 technology provides 12-bit resolution up to 8 GHz and 20 GS/s
- Up to 5 Gpts of acquisition memory enables detailed viewing of long events
- 15.6" 1900 x 1080 Full HD capacitive touchscreen
- New ProBus2 input supports up to 8 GHz bandwidth and direct compatibility with a wide variety of existing ProBus probes - 50Ω and 1MΩ coupling modes support all input types on a single connector
- MAUI with OneTouch user interface for intuitive and efficient operation
- Deep toolbox enables and simplifies complex analysis
- Intuitive navigation to quickly find important features in long waveforms
- Zone Trigger – Simple Triggering for Complex Signals
- The Narrow Linear Diffuse Light series is ideal for precision scanning of highly reflective materials.
- The DL151 is available in a wide range of wavelengths and provides up to 28kLux at a 1” (25mm) standoff.
- The extruded aluminum enclosure can be expanded in 2″ (51mm) increments from 2″ to 70″ (1778mm).
There are 2 versions of the Xena chassis: the standard B720 and the high-performance B2400. Both versions consist of a 4U modular chassis that can be equipped with up to 12 Xena Ethernet test modules to provide high port density and low power consumption.
- Easy replacement of essential components by the customer in the field with a downtime of less than 1 hour
- Intuitive API for easy integration with customer software and existing systems
- Standardized power and network components avoid additional costs
- Optimized for working areas up to 10 m x 10 m and projection distances up to 15 m
- Adjustable focus enables precise projections at different distances and on different surfaces
- Accuracy of better than +/- 0.25 mm/m for highly precise results
- Fine 3D line quality even at high projection distances ensures visible and clear projections
Teledyne LeCroy
