Spin mode is a dynamic mode intended to provide a simulation of a spinning satellite.  Enhanced Eclipse mode is a dynamic mode that allows the user to easily program and initiate an eclipse event with total control over all of the V-I curve parameters and dwell times.  Operates with Sequential Shunt Regulators and Maximum Power Point Trackers  Multiple redundant OVP/OIP layers

Precise programming of voltage and current slew rate for sensitive loads.  Industrial field bus interfaces (Modbus-TCP, Modbus-RTU, Ethernet) enable real-time digital control.  Built-in power quality monitoring detects and saves input voltage anomalies which can be saved for later diagnostic analysis.  Programmable analog interface scaling facilitates integrating the ASD FLX with existing systems easily.  Built-in energy meter calculates the delivered energy throughout a process or period.  Optional real-time clock enables accurate timestamping of events.

Three independent, isolated DC output power supply 600W channels  Total DC power density up to 1800W in a 1U chassis  5 autoranging output channel options  Intuitive color touch panel control  Multi-language display for global operation  Multi-channel programmable sequencing, ramps, and delays  Active power factor correction (PFC)  Standard LXI LAN, USB, and RS232 interfaces  Optional GPIB interface  Full remote control via Virtual Panels™

Three independent, isolated 1700W DC outputs, 5100W total  1U rack-mount chassis  9 output options  Multi-language, intuitive, color touch panel control  Global 3-Phase AC Input options for system phase balancing  Active power factor correction (PFC)  Multi-channel programmable sequencing, ramps, and delays  Full remote control via Virtual Panels™ GUI  Standard LXI Ethernet, USB, and RS232 control interfaces  Optional GPIB control interface or isolated analog programming

High power density DC power supply in a 1U chassis (up to 5 kW) or a 2U chassis (up to 10 kW)  Intuitive touch panel control  Available in either Fixed or Autoranging output  Multi-language display for global operation  Auto paralleling for higher power  Full remote control via Virtual Panels™

Energy absorber with a rating of 400VDC at ±150A  Provides up to 400V at 150A for 60kW of output power Energy Absorber Load chassis creates a total resistance of approximately 1.5 Ohms at 30kW continuous and 60kW peak

High power density / low ripple and noise  High programming resolution with Ethernet interface  Constant voltage and current mode  Remote sensing  Isolated analog control and monitoring (optional)

High Power Density : 3 kW and 4 kW models, 2U (3½” high), (19” wide); no top or bottom clearance spacing required  Preview Push-button : Overvoltage protection (OVP), voltage and current preview buttons  Remote Voltage Sense : Sense leads are easily connected to a solderless connector  Parallel or Series Operation Field configurable  Power Factor Correction ≥0.98 1 Ф 3kW

High Power Density: 600 watts in 1U (1.75 inches) high, half rack (8.5 inches) wide; no top or bottom clearance spacing required.  Near Linear Ripple & Noise Ripple as low as 2.5mV rms, noise as low as 15mV p-p.  Remote Control  LXI Compliant Ethernet LAN / RS-232C (16 bit)  IEEE-488.2 / RS-232C (12 bit)  Standard analog programming 0-5V, 0-10V, or 0-5kΩ.

High power density up to 150 kW in a single bay rack-mount cabinet. Up to 240 kW in a dual bay rack.  Fast load transient response provides protection from undesired voltage excursions.  Fast slew rate with exceptional rise/fall times for speed-critical applications.  Low ripple suitable for the most sensitive applications.  Low audible noise with temperature controlled variable speed fans.  High accuracy voltage/current measurements without external DMMs.  Modular architecture simplifies sparing and maintenance.

Single system power up to 650 kW Parallel system power up to 1.3 MW  Output voltage up to 1,000 V  Bidirectional output current up to ±1,000 A, up to ±2,000A in parallel  Available in 1, 2 or 4 channel configurations  Multiple channel units share internal DC Bus up to 2MW without drawing additional power from the AC Grid  Regenerative to 96%  Large 15-inch color touch panel  Short circuit proof  Designed for safety to EN ISO 13849-1  Dedicated Battery Testing/Simulation Modes  Seamless transition between source and sink  High reliability, long life components

Broadest Model Selection: 800W to 7.5kW (higher power available up to 250kW Contact Factory)  Exclusive Voltage Models: 60V to 1000V  Multiple loads in one: Multiple ranges for voltage, current resistance and power  Intuitive Front Panel Control: Run sequences, triggers, constant current to constant power cross over  RoHS Compliant