Sorensen - Asterion DC Series - High Performance DC Power Supplies
-
High power density in a 1U chassis (up to 5 kW) or a 2U chassis (up to 10 kW)
-
Intuitive touch panel control
-
Available in either Fixed or Autoranging output
-
Multi-language display for global operation
-
Auto paralleling for higher power
-
Full remote control via Virtual Panels™
More Product Information
-
3 independent, isolated 600W channels
-
Total power density up to 1800W in a 1U chassis
-
4 autoranging output channel options
-
Intuitive color touch panel control
-
Multi-language display for global operation
-
Multi-channel programmable sequencing, ramps and delays
-
Active power factor correction (PFC)
-
Standard LXI LAN, USB, and RS232 interfaces
-
Optional GPIB interface
-
Full remote control via Virtual Panels™
-
Three independent, isolated 1,700W channels, 5,100W total
-
1U rack-mount chassis
-
Eight output options
-
Multi-language, intuitive, color touch panel control
-
Global 3-Phase AC Input options for system phase balancing
-
Active power factor correction (PFC)
-
Multi-channel programmable sequencing, ramps, and delays
-
Full remote control via Virtual Panels™ GUI
-
Standard LXI Ethernet, USB and RS232 control interfaces
-
Optional GPIB control interface or isolated analog programming
-
High power density in 1U / 2U / 4U / 14U chassis up to 18kVA
-
Intuitive touch panel control
-
Innovative iX2™ current doubling technology
-
Multi-language display for global operation
-
Auto paralleling for higher power
-
Single phase 1U models and 1 or 3 phase selectable 2U / 4U / 14U models
-
Complete avionic test suites (optional)
-
ATE version available in 1U, 2U and 4U models
-
Standard LXI LAN, USB and RS232, optional GPIB
-
High Power Density: Up to 15 kW in 3U, 30kW in a 6U chassis
-
Wide Voltage Range: 0-10V up to 0-1000V, from 4 to 30 kW
-
Fast Load Transient Response: Protection from undesired voltage excursions
-
Low Ripple and Noise
-
Intuitive Touch Screen Display
-
Parallelable up to 150 kW
-
Sequencing: Freesystem controller & speed up test
-
Low audible noise: Temperaturecontrolled variable speed fans
-
Low noise
-
Excellent line/load regulation
-
Coarse and fine voltage controls
-
Constant voltage or constant current operation with automatic crossover and mode indication
-
Individual On/Off switch per output (not including fixed output)
-
Variable 1.5 -5V output on triple output model
-
Switchable remote sense
- Highest Power Density
- Comprehensive Digital and Analog Interface Options
- Scalable, Multi-Unit Design
- Multi-Channel Support
- Straightforward Front Panel Controls
- High Reliability
-
High Power Density up to 150KW in a single bay rack-mount cabinet. Up to 240KW in a dual bay rack.
-
Fast Load Transient Response: Protection from undesired voltage excursions
-
Fast Slew Rate with exceptional rise/fall times for speed-critical applications
-
Low Ripple Suitable for the most sensitive applications
-
Low Audible Noise Temperature controlled variable speed fans
-
High accuracy Voltage/current measurements without external DMMs
-
Modular architecture simplifies sparing and maintenance
-
Precise programming of voltage and current slew rate for sensitive loads.
-
Industrial field bus interface (Modbus-TCP, Modbus-RTU, Ethernet) enable real-time digital control.
-
Built in power quality monitoring detects and saves input voltage anomalies which can be saved for later diagnostic analysis.
-
Programmable analog interface scaling facilitates integrating the ASD FLX with existing systems easily.
-
Built-in energy meter calculates the delivered energy throughout a process or period of time.
-
Optional real time clock enables accurate timestamping of events.
-
Precise programming of voltage and current slew rate for sensitive loads.
-
Modules within one chassis can be connected to different loads and controlled independently.
-
Industrial field bus interface (Modbus-TCP, Modbus-RTU, Ethernet/IP (Industrial Protocol)) enable real-time digital control.
-
Built-in energy meter calculates the delivered energy throughout a process or period of time.
-
Optional real time clock enables accurate timestamping of events.
-
Built in power quality monitoring detects and saves input voltage anomalies which can be saved for later diagnostic analysis.
-
Programmable analog interface scaling facilitates incorporating the ASD to existing systems with minimal effort.
-
Load impedance measurement, including rate-of-change calculations, enable load "state of health" monitoring and implementation of system preventive maintenance algorithms
-
Programmable filter bandwidth of the output voltage, current and power monitors let the user accommodate their response speed to particular needs.
-
Full featured GUI (Graphical User Interface) helps to test and debug the system by communicating with the power supply in real time.
AMETEK Programmable Power
Located in San Diego, CA, AMETEK Programmable Power designs, manufactures and markets precision, AC and DC programmable power supplies, electronic loads, application specific power subsystems, and compliance test solutions for customers requiring & valuing differentiated power products and services. Also in our San Diego manufacturing facility is the recently acquired VTI Instruments brand which delivers precision modular instrumentation and systems for electronic signal distribution, acquisition, and monitoring, used in the world's most demanding test applications.
AMETEK Programmable Power boasts one of the industries' broadest portfolios of programmable power products under the well known and respected Sorensen, Elgar, California Instruments and AMREL brands. AMETEK's programmable power supplies and power sources serve a wide range of stimulus (T&M) and process power needs in applications including semiconductor fabrication, commercial and defense ATE, oil exploration, solar array and battery string simulation, avionics, general R&D and EMC compliance testing.
Contact Details
AMETEK Programmable Power, Inc. − San Diego
9250 Brown Deer Road
San Diego, CA 92121
Phone: 858-450-0085
Fax: 858-458-0267
Contact form or Email: sales.ppd@ametek.com for general inquiries
DC Programmable Power Supplies
Sorensen DC Rack-Mounted, Bench-Top and Modular programmable power supplies
Model | Voltage | Current | Power | Overview |
DLM 600 | 5V - 300V | 2A - 75A | 375W - 600W | 1/2 Rack Programmable DC Power Supplies |
XG 850 | 6V - 600V | 1A - 110A | 670W - 850W | 1/2 Rack Programmable DC Power Supplies |
XG 1500 | 6V - 600V | 2A - 187A | 1500W - 1560W | 1500 Watt, 1U Programmable DC Power Supplies |
XG 1700 | 6V - 600V | 2A - 220A | 1330W - 1710W | 1700 Watt, 1U Programmable DC Power Supplies |
XFR Series | 6V - 600V | 2A - 300A | 1.2kW - 2.8kW | Programmable Analog DC Power Supplies |
DCS Series | 8V - 600V | 1A - 350A | 1kW - 3kW | DC Programmable Switching Supplies |
DLM Series | 5V - 600V | 5A - 450A | 3kW - 4kW | Programmable DC Power Supplies |
SG Series | 10V - 800V | 6A - 6000A | 4kW - 150kW | High Power Modular DC Power Supplies |
SFA Series | 60V - 160V | 31A - 500A | 5kW - 30kW | High Slew Rate Current Source |
ASD Series | 40V–60V | 167A–8000A | 10kW–320kW |
Programmable Precision High Power DC Power Supply |